Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated: Fixed Feature button definition LDP-9030D Digital Telephone Description Quick Guide Button Description 3 Soft Used in conjunction with fixed and flexible features, and the function changes in relation to call progress, as indicated on the LCD display. Page Used to change more additional functions on the LCD display . Trans/PGM This button is used to initiate a call transfer (TRANS) or to enter programming mode (PGM). Speed Used to access speed dialing, speed programming, save number redial, and last number redial. DND The DND (Do Not Disturb) feature blocks all calls. When DND is active, the red LED in this button is illuminated. When pressed after the Speaker button it is used for setting call forwarding. Used by the attendant to set the Day/Night mode. Call Back A station can initiate a call back request to a busy station. Once that station becomes idle, the initiating station is signaled. Mute Toggle outgoing audio; red LED illuminates. Volume The volume button adjusts the audio levels for ringing, handset and speakerphone functions. Speaker Speaker toggles the speakerphone state, and the red LED is illuminated when the speakerphone is active. Hold/Save This button is used to put a call on hold or save information when programming. 30 Flexible Some flexible buttons are pre-programmed in the system for line appearances, loop functions etc. The remaining flexible buttons can be user-programmed. Visual Ringing LED Illuminates when there is a message (in some cases when phone is ringing). LCD Display Displays information about telephone status, dialing directories, and message information. Hands-free Microphone Microphone is used for hands-free speakerphone function. Receiving calls _ Answering a Call While Idle : 1. Lift the handset and the call will be connected. Responding to a Call While Busy 1. Press [Hold/Save] and/or 2. Press the flashing CO line button. Answering Calls to Other Stations To answer a call ringing at another station: 1. Lift the handset, 2. Dial *77 (Direct Call Pick-Up code), 3. Dial the Intercom Number of the ringing station; the call will be connected. To answer a call ringing at a station in your group: 1. Lift the handset, 2. Dial * * (Group Call Pick-Up code), the call is connected. Using Do-Not-Disturb (DND) to Block Incoming Calls To toggle DND ON and OFF: 1. Press the [DND] button. Forwarding calls to another Station or Voice Mail To activate Call Forward from your phone to another phone or internal system resource: 1. Lift the handset, (or press Speaker) 2. Press the [Fwd] Soft button, 3. Dial the type of forward code 1-4 4. Dial the destination number. Placing Intercom calls To place an Intercom call: 1. Lift the handset, 2. Dial the Intercom number of the desired station, 3. On answer or Splash tone, speak to the called party. Using Camp-On when calling a busy station To Camp-On (wait off-hook) for a busy station: 1. Press [*] and wait an answer. Using Last Number Redial (LNR) To dial the Last Number for an external call: 1. Lift the handset, 2. Select the [Redial] Soft button, 3. Press [? volume ?] to select from the last 10 numbers dialed, 4. Press the [Send] Soft button or [Hold/Save]. Using System Speed Dial Numbers To place a call using System Speed Dial: 1. Lift the handset, 2. Press the [Speed] button, 3. Dial the desired System Speed Dial bin number Using and Entering Station Speed Dial Numbers To place a call using Station Speed Dial: 1. Lift the handset, 2. Press [Speed], 3. Dial the desired Station Speed Dial bin number LDP Keyset User Operation To enter a Station Speed Dial number with CO Line and Name: 1. Press [Trans/PGM], 2. Press [Speed], 3. Dial the desired Station Speed Dial bin number, 4. Select/dial the CO line/group, 5. Dial the desired number to be stored, 6. Press [Hold/Save], 7. Enter the associated name if desired, using the alpha-numeric entry chart, 8. Press [Hold/Save]. To assign a Station Speed Dial number directly to a Flex button: 1. Press [Trans/PGM], 2. Press the desired [Flexible] button, 3. Dial the desired number including CO Line/Group access code 4. Press [Hold/Save], 5. Enter the associated name if desired, using the Character Entry chart, 6. Press [Hold/Save]. ACNR: To retry a busy external number until answered To set up an ACNR, while on an outgoing call: 1. Use the Navigation button to display the next menu and select the [ACNR] Soft button, 2. Hang-up handset. To cancel the ACNR request: 1. Press the [ACNR] Soft button. Call Transfer: Sending a call to a different destination To Transfer an active call: 1. Press [Trans/PGM], 2. Call receiving party, 3. Hang-up with or without announcement. Call Hold: Placing a call in a waiting state To place a call on Hold: 1. Press [Hold/Save]. Joining Multiple People in a Conference To establish a Conference: 1. Establish call with one of the desired conference parties, 2. Select the [Conf] Soft button, 3. Establish call with the other conference party, 4. Select the [Conf] Soft button, 5. Select the [Conf] Soft button again to establish the conference. To place a Conference on Hold: 1. Press the [Hold/Save] button. To retrieve the Conference: 1. Select the [Conf] Soft button. To make an External-parties-only Conference: 1. Establish conference with two external parties, 2. Select the [Conf] Soft button to exit. To enter pre-opened Conference Room: 1. Dial *59 X where X is the conference room number. � ? Press the [Trans/PGM] button � ? Enter the desired feature code below table CODE FUNCTION CODE FUNCTION 11 Station Ring Type 51 Set Preselected: Custom Message 12 CO Ring Type 52 PGM Custom Message 13 Answer Mode (Tone, H/free or Privacy) 53 Activate Conference Room 14 Call Coverage Attribute 54 De-activate Conference Room 15 Station Ring Download 55 Monitor Conference Group 19 EAR-Mic. Headset 61 Speaker, Headset, Bluetooth Mode 21 COS Down (Lock handset) 62 Headset Ring Mode 22 COS Restore (Unlock handset) 71 LCD Display Language 23 Walking COS 72 MPB Version Details 24 ICR Scenario 73 BGM (Background Music) 25 LIP Keyset Status 74 Register STATION Name 26 Call Profile 75 Display Phone IP Address 31 Message Retrieve Method 77 Display MAC Address 32 Message Retrieve Example 78 Network Configuration 33 User Authorization Register (Password) 79 Display Phone Version 34 DID DISA Call Wait 7* Display Unlock Key & Add-On Package 35 Choice Executive/Secretary Message *0 Hot Desk Login 36 Send SMS Message *6 Set Forced Forward Destination 37 Register Mobile Extension *7 Forced Forward to Destination 38 Activate Mobile Extension *8 Register Bluetooth 39 Register Mobile CLI *9 Bluetooth Usage 30 VM Mobile Notify ** Hot Desk Log Out 41 Set Wake Up Time 10 Enblock Mode 42 Wake Up Disable User Program Codes iPECS eMG80, UCP & LIK � ? Press the [Trans/PGM] button � ? Enter the desired feature code below table � Note: After pressing 0 enter your STN number & password. CODE FUNCTION CODE FUNCTION 01 Print [Main Menu] 05 Message [Main Menu] 011 SMDR [Sub Menu] 051 Set Preset Custom Message 0111 Print SMDR (STA BASE) 052 DND / FWD / MSG Cancel 0112 Delete SMDR 053 Custom Message Register 0113 Display Call Charge 054 Monitor Conference Room 0114 Abort Printing 055 Delete Conference Room 0115 Print Lost Call 06 Record Voice Announcements 0116 Delete Lost Call 07 Supplementary [Main Menu] 012 Traffic [Sub Menu] 071 Register Station Name 0121 Print All Summary 072 Isolate CO Fault 0122 Print All Periodic 073 Auto Day/Night/Timed Program 0123 Abort Periodic Print 074 External BGM Port 1 0124 Prtint Attendant Traffic 075 External BGM Port 2 0125 Print Call Summary 076 LCD Display Language 0126 Print Call Hourly 077 PTT Login / Logout 0127 Print Hardware Usage 078 Display CPU Redundancy State 0128 Print CO Summary 079 Font Set 0129 Print CO Hourly 070 Contrast Set 02 COS [Main Menu] 08 Emergency History 021 Set Intercom Only Mode 09 USB [Main Menu] 022 Restore COS 091 USB Upgrade 03 Authorization [Main Menu] 092 USB DB Download 031 Register Authorization 093 USB DB Upload 032 Erase Authorization 0# WHTU DECT Subscribe (UCP/LIK) 04 Date and Time [Main Menu] F1 WTU Subscribe Enable 041 Change Date & Time F2 WTU Unsubscribe 042 LCD Date Mode F3 AC Code 043 LCD Time Mode F4 Park Number View 044 Set Wake Up F5 WTU User Authenticate 045 Disable Wake Up F6 Park Number Register 046 Network Time & Date (0:off,1:ISDN,2:NTP) F7 WTU Subs All Data Erase 047 Attendant Hotdesk Login F8 WTU Subscription Erase 048 Attendant Hotdesk Logout F9 DECT Mobility8699