Original subtitles

In this video, we are going to see how to generate the example Tuffin drawing file attached with this

lecture.

As you can see here, this is the drawing that we are going to make.

First, we will make this center portion and then we will make this outer portions.

As you can see here I am in the partisan interface of a new file.

Click on the sketch icon and get into a plane.

Now we are in the sketcher interface.

Let us start by first drawing.

Concentric circles double click on Circle.

We'll take the origin and create a circle and we'll take the origin and create another circle.

Now click on the sars-cov-2 deactivated double click on Dimensioning this days, one hundred.

And the small Smalley's 50.

As you can see here, we have to constrain the Sakalys, not let us create a line.

The horizontal line immediately ultimate altikriti meant redundancies, repulsions is takes exit from

the quick trim command niantic dimension between this line and this axis.

This is of value five.

No, I'll take this line insert operation transformation meter about this horizontal axis, and you

can see we have created two lines.

Now these two lines has to be rotated around this origin point and we have to create five instances.

Let us select these two lines.

First line, use the control button for multiple selection.

And secondly, go to insert operation transformation rotate.

We'll take this as a rotation point and the reference point with respect to these two objects, we can

take it along this horizontal anywhere you like.

Let me click here.

You can see we are creating some instances now here will change it to five so that.

Five instances plus one additional object total, six objects will be found.

Hear the angle, I can take 360 by six.

Which is 60 degrees that you can take three sixty divided by six percent in Turkey and you can see the

objects has been formed.

Here there is a small problem in Kenya, which is if you go for a state or any kind of transformation

features except mirrors or symmetry, the constraints won't be transferred.

So if I move this object, you can see it is not constrained, but I use the controls that give us.

You can create a fixed constraint because we already know that.

These are positioned correctly so we can use a fixed constraint to fix the position of this object.

Click on the object, click on constraining, and use the option called fix.

Which will fix the position of the object and you can see it has been constrained.

Similarly, select this fix.

Select this and fix select this.

Fix and will fix all the white lines so that it gets constrained.

Now, the last object, select and fix it now let us do you can see we have created a center portion.

Now we have to create the outer portions.

Will start with a circle somewhere here.

Let us position the circle from the center.

To this horizontal axis, this is of value at the center to this vertical axis, this is of value 45.

And the radius of this circle.

Is 30.

Now we have a constrained circle, let us immediately military select the circle inside Operation Transformation

model instead of entering inside.

You can also take you middle.

Select the mirroring line and you'll get the object on the other side.

Similarly, take this circle and circle mirror about this axis.

Now, let us take a circle somewhere here, you can see a lot of interferences there from the doctor

lines, which will create a constraint.

So I created.

Some of it here.

So that there are no other constraints and then move the circle nearby where they want to position.

Click on this circle and circle.

Tangency click on OK, this circle and the circle tendency click on OK.

Now take dimension.

Of this circle, this value is 30 to.

Now, take trim and trim this portion here, we can also take Veillette.

USno, trim.

And select this circle and the circle.

You can see that a clear, tangential circle can also be created and double click to give the radius,

which is of 30.

Similarly, double click on this.

This circle and the circle.

Will it here, this circle and the circle, will it here?

Volunteer.

And if we let you.

Now, let us give the dimensions, this is a value 20.

This is also 20, 20 and 20 here.

Now, double click on Quick Trim in this portion, this, this and this.

And you can see the boundaries created.

Now we have to create only the four circles.

Double click on Circle this full circle.

We are going to create this the full circle.

Click on the center.

Click when you don't get any dotted lines, then only you will be escaping from the constraints, otherwise

it will be a problem.

You can see here there are no links, I can click on the escape key, no double click on dimensioning.

The diameter of this circle is 20 and.

This also has a diameter of Compte and.

Same for this circle.

And Issaka.

And you can see we have created our required geometry.