Original subtitles

In this video, we are going to see how to create a fully constrain the geometry of example 14 file

attached with this lecture you can see here, this is the drawing that we are going to make.

First, analyze which portion you are going to make first, as already have told in the previous examples,

you have to concentrate on the center of the drawing.

The center doesn't mean the middle portion of the.

It means the portion which, if you first make, will benefit you for making the other portions.

Let us analyze this.

Here, this all four circles and the boundary calls a reference to it.

This middle portion and this middle portion also has this internal things which are referenced with

respect to this boundary.

So first, let us make this boundary and after that will make this internal stuff, then we'll go to

the external circles and other parts.

Let us start.

I have created a new file.

I am in the park design interface.

Use the search tool and click on any plane to get inside the sketcher interface.

Now, let us start making that right.

Just let us make two circles.

Double click on Circle.

Maybe one circle here and another circle here.

Exit from the circle, come on now.

The central point.

Use the control key to select multiple objects and take the axes.

Coincidence?

Similarly, at this point and this vertical coincidence.

I take dimension from here to here, this is 50.

And dimension from this point.

To this point, this is of value one hundred.

Now, double click on Dimensioning, let us give the radius.

Of twenty five them and will select this circle, give a radius of 30 tattoo circles are constrained,

let us click on a circle and make a bigger circle.

Select this bigger circle and the smaller circle tangency.

Similarly, bigger circle and smaller circle.

Tangency.

Let us give a radius or diameter, a radius of 100 is given in that right.

So let us give it a value of one zero zero into the circle is constrained immediately.

I'll go for trimming the necessary portions, which is this portion, a big circle.

And I'll create a bigger circle now, select the two circles.

Tendency to select digital circles.

Tendency.

Now, let us give it diameter radius, a radius of 100 has been given.

It is fully constrained now double click on Quick Trim Trim, this portion, this portion and this portion

pressed the escape key to exit from that quick trim.

Come on now.

Let us clear that internal stuff, the arc inside it.

Double click on Circle, select the center point and create a circle here and select this center point.

Create another circle here.

Prevent this dotted lines.

It will create unnecessary constraints.

Two circles we have created now let us give the diameters double click on Dimensioning.

The radius of this is given is 18.

The radius of this has been given this 20.

Circles have gunslinging.

Now, I'll take another circle, this also take a bigger circle.

Now, take this circle and the circle tendency, similarly, the circle and the circle.

Tendency.

Let us give a dimension.

The radius of this arc is 100.

Now, let us double click on QuickTrip.

In this portion, this portion and this portion.

Escape from the quick dream, come on now, let us take another circle.

You can see here at a certain point, I'm directly able to create a tendency to this circle, this is

beneficial.

Then at daycare, you can see.

It is getting it turned into a symbol when I click, you can see it is becoming standard.

So it has saved my time for constraining the tendency between these two circles.

So try to use this option.

Now, select this circle and this circle and give tendency.

Now, let's give a dimension to this Sakho.

They will claim this is of 60 degrees.

Now, double click on quick in this portion, this portion and this portion.

This and this, and you can see the internal elongated hole has been created now.

Double click on Circle.

Select on the center point, create a circle here, click on this center point and create a circle here

while creating you should prevent these dotted lines.

It is very important if you are not able to do it, make a bigger circle so that no dotted line will

be able to interfere.

You can see still it is interfering.

So you have to click when those dotted lines won't be coming, click here maybe.

Now, let us give the dimensions double click on dimensioning, Constance.

This circle's diameter is.

And this circles diameter is also currently.

You can see we have found.

We have to form this portion.

Let us create rectangle.

Something here, not this object is symmetrical about this horizontal side.

Take this line, this line and the horizontal axis and give constrained called symmetry.

Now, let us give the dimensions double click on Dimensioning.

From here to here, this value is 25 from this axis.

To this line, this value is 10.

And from here.

To hear this two line distances, 20 you can sit is fully constrained.

Now let us give those flats.

Ah, five years and click on this flight icon, double click on Flight Icon, let us do it.

Affiliate here.

Here you can also select that corner and make the flat.

It's up to you how you make the floods now double click and give it a mention of five that will click

here five.

Double click five and here also a of five.

And you can see we have Honda Center figure.

Press the escape key to exit from the command.

Now, let us make the outer circles and the outer curves.

Let us take Sakho.

I'll create a circle here.

I'll get another circle at the center by taking the.

Centre of the earlier circle.

Double click on Dimensioning.

From this center to this horizontal axis, this value is given its 90.

From the center to the vertical axis, this will is given its 70 now.

This outer layer is given us 60, which is of radius 30 as given in the drawing, and this inner diameter

is of a radius value 15.

No prisoner escaped to exit from the dimensioning constrain nonreaders of circles.

Go to insert operation.

Transformation middle and select these two objects if you have problems selecting the objects after

selecting mirrors, what you can do is Alpers, their skin key.

Select the two circles first by using the control button on the keyboard.

Now go formidable.

Go to insert operation transformation mirror.

Now you just have to select the axis about which you want to mirror.

So this is my mirroring axis click and you can see the object has been mirrored.

Now, let us create another two circles, double click on Circle.

Create a circle here and create another concentric circle to this circle.

Now, I double click on dimensioning from this access to this point.

This value is one Compte.

Again, from senator.

To this vertical axis, this value is 70 and this diameter is.

60, that is, of radio's.

This Demitrius.

Thirty, the reserve rate is 15.

Prisoner escaped from the command.

Now I take this to Sakalys insert operation transformation mirror about this vertical axis.

Now we have created the circles.

We just have to connect to the boundary and go to insert profile line.

By tangent line, click on it, select this circle and the circle and you can see it directly, then

the initial line has been generated, not click on Biton and line again.

Click on this icon.

This circle and the circle, now I'll take a circle.

And create a circle here.

Select this circle and circle.

Tangency.

The circle and this circle.

Tendency.

Now, let us give a dimension.

It is his 50.

Immediately, I'll go for trimming the necessary portion.

Similarly, in that nobody else will create a circle.

It will be a problem because a lot of trucking lines are getting return, so click somewhere here.

And make a circle, a very big circle.

Now, this small circle and this big circle will take his tendency, again, bigger circle and the circle

will take tendency to click on OK now dimension of this bigger circle.

Is 200, as it is doing now, will take trimming and trim this unnecessary portion.

And you can see our fully constrained sketches generator.