All language subtitles for 26. Creating Points, Point using Coordinates, Equidistance points,Intersection Point-en_US

In this video, we are going to see how to create points.

Go to insert profile points, we are going to create points using these tools, let us first select

point.

Click anywhere you like, and it will develop a point for constraining a point, your request to constraints,

both are the differences between the point and the current system.

That is a vision that.

You can give them dimension or you can give geometrical constraints.

It doesn't matter.

Let us select this point and select this horizontal.

Coincidence?

You can see maybe a dimension from this point to vertical.

And you can see the point has turned into green, this indicates it has been constrained.

Let us deleted, select this and delete now let us see the other options.

Point, point using coordinates, click on it if you have a point, coordinate directly, you can develop

a point.

Suppose I'll have X coordinate is 50 and Y connectors 50.

So in addition, value, you can give you 50 click on OK.

And you can see a completely constrained point has been developed, which is 50 50 distance from the

energy they can insert, profile, find.

Point using ordinance in polar amateur year to give a radius, maybe 50 an angle, maybe some 120 degrees,

click on OK, and you can see a completely constrained point has been developed by taking an angle from

the horizontal as 120 degrees and distance from the origin as 50.

So this is how you can develop points using coordinates, let us drill the points as they insert profile

point equidistance points for this I requested line.

Click on Escape the exit from the command.

Also, let me take.

In line, something like this.

I'll take insert profile point equidistance point, click on it, let me select this line, you can

see.

A number of points have been created at equidistant from each other on this line.

You can defend a number of points to five.

You can see automatically the spacing and length changes click on OK, and you can see the points have

been developed which are equidistant from each other.

Now let let's see the next option.

Profile point.

Intersection point, click on it, select this line and this line and you can see a point has been developed.

At the intersection of both these lines, you can use this point for defining the intersection of these

two lines.

I like to see the next option for that.

Let me create a circle, maybe somewhere here.

I'll take insert profile point, production point, click on it.

Couples, I want to project this point on to this circle, you can see a projection of the point is

getting created by maintaining perpendicularly with this profile.

Take profile, fine production point between this point and this line, you can see.

The point is dropping a perpendicular to any curve on which it is selected and it is creating a point,

you can see a point is getting created here.

There is a point here.

And also there is a point here.

So this is how we can create points in Kadia.