Original subtitles

In this lecture, we are going to create the example dual drawing file attached with this lecture you

can see here, this is an example tool drawing that we are going to make.

Whenever you see a drawing, you have to find out the center of the ring, which, if you make first,

will give you power to create other geometries very easily, like if we analyze this drawing, you can

see this is actually the center of the drawing.

That is, if we make this portion first, then this bottom portion will be very easy to create.

But if you start from the bottom, it is difficult to create this potion.

It's not impossible, of course, but it is difficult because there are 1001 methods to create a drawing,

you have to select the method which is very easy for you to make, and it will consume less time.

So here first we are going to make this top portion, then we are going to make this bottom portion.

Let us start first.

Let me create a circle.

And created some video.

This Centrepoint and this horizontal coincidence.

We move it up.

The damage done from here to here.

This is a value 82 divided by two 40, because I want to keep the other circle symmetrical border access

Alltech Dimensioning again, select the circle, double click.

This is of readiest value.

Grunty.

Now, let's take circle again on the other side will make a circle.

Select this circle and this circle about this vertical.

So it is automatically constrained.

None of this school attendance.

Double click on this line.

Will create a horizontal line here.

Create a horizontal line here like this, and now we will create the constraint, this line in the circle

tendency between this line in the circle.

Tendency now double click on quick trim and trim the portions that are not required.

Deselect the now tag line and create a line somewhere here dimensioning.

The distance from this line to this line.

Is 10 one zero until now, double click on quick trim and trim, the portion that are not required,

this portion, this portion and this part of the circle.

Now we have to create the internal obstacles, it is very easy to click on the circle, select the center.

You can see there is a lot of interference of automatic dimension to make a bigger circle.

Here also take the center, make a bigger circle.

No, I'll give a dimension here.

This is of religious value 10.

And I think damage and again, this is also affected is value one zero 10.

We have very easily created the proportion now will go to the bottom portion.

Technophile.

On this curve, I created the first point.

A vertical.

A horizontal line.

Somewhere here.

And al Qaeda Buttiglione.

A lot of interferences there.

You can create a vertical line here, but in this capecchi and drag this sand point and keep it here.

It doesn't matter how quick trim and then this portion.

Let us give the dimensions.

Click on Dimensioning from here.

To this portion.

This is 80 this Leontes 60, but if we give the length of this line, then when we use the fillers,

this will create error.

So we will select this line in this line and give it distance from Bob Dylan's.

This is 60.

No will give a dimension from here to this center.

This value is 10, and you can see the figure is constrained.

Now we'll get the figures.

Double click on Connect.

A here.

And the Philadelphia.

Click to deselect double click here.

This is a IT value often don't click here.

This is also for this value 10.

Now we have to create that hole in Kenya, we have the option directly for creating that type of a profile,

which is called elongated hole.

You'll get that option when you go to insert three different profile.

Elongated, who'll click on it and when I click here.

But this dotted lines click here, you can see directly we are forming the geometry that we want to

make, which is elongated whole.

Double click on this dimension, this is of really esten, so we have found the elongated hole now constrain

it, double click on this dimensioning from this line to this center point.

This value is 20 percent and length of this line.

This is 15.

I mentioned from here.

To this base.

This is 30.

And you can see how easily we have made the example to children.

We also have seen an option called Olonga Terre Haute.