All language subtitles for 20. Example-11-en_US

In this video, we are going to generate the example and drain file attached with this picture.

You can see here, this is the example that we are going to generate.

First, we are going to create this base.

And then we are going to create this top portion after that, we are going to generate the fillers and

the temper's let us start first.

Let us create a profile for the base.

Click on Profile.

Let us create a profile, which will be a rough profile.

We are going to create the term facilities, so no need to make it No.

I can make use of this constraint for coinciding.

You can see we are using this automated constraining for coinciding this point with deadline.

Yet no need to use this sort of constraint, click somewhere here.

Prisoners get to exit from the command.

Now, select all the entities and you can move it all together.

And keep it here.

This line and this axis will give a constraint, which is coincidence.

Now, as we have greater authority concerning here, so directly this is considered.

So we do not give any coincidence to this line and this line.

Not to give the Democrats double click on Dimensioning.

From this line to this line, this value is 20.

This line to this line, this village, 10.

From here to here, this is of 20.

From here to here, this is also 20, but instead of this dimensions on this side, we will create the

symmetry which we have not done until now.

In the last drawing that we had made, first we had general dosimetry constraint, so automatically

when I give dimensions on one side, the other side used to constrain.

But yet we have not given it a lot, let us give it like this line and this line about this vertical

axis.

Will create symmetry.

This line and this line about this vertical axis symmetry.

Now, we will give the total length from here.

To hear.

This value is 100.

Also, this line and this line about this vertical will give us symmetry constrained.

Now, take dimensioning from this line to this line.

This value is 20.

Not let us create a circle.

Take a circle somewhere.

This Centrepoint and this vertical axis coincidence.

Another dimension from here to this.

Line is 35 plus 15, 35 plus 15.

No need to calculate, you can directly give the mathematical value here and it will calculate, not

select the dimensioning.

And a release value is.

Thirty three zero enter.

Let us trim it, used a quick trim double click on quick trimming, trim this Pushtuns.

You can see I'm entering some entity, constraining it and trimming it, I'm not keeping the trimming

for the last.

Due to which the process seems to be easy, if you remember the last, then it will be a complex process.

So please follow the procedure that I am doing now, let's create a circle for creating this arc.

I'll take a circle somewhere here, but when this constraints address, it will create a problem.

This point on this vertical axis coincident.

Dimension between.

This Centrepoint and this Centrepoint.

Is of value for people now will give the.

Diameter, the radius, whatever is given.

The Radiuses Party.

Now, let us TriMet double click on trimming this portion and this portion.

And you can see we have generated the outline of the geometry that we wanted to make now.

We will give the radius and emphasis.

After that, we will input the circle, which is here.

Let us first take Connor.

It's like this circle and this circle.

And before that, you can change here to trim all elements so that the input costs will be trimmed.

Similarly, Connor, between this line and this line, now double click on this value.

This is for a religious.

Double click here for a moment it is.

Again, I'll take on click on Corner during this area, giving Connor here to this vortex.

You can also take a line like this.

Now, double click on this radius, which is eight.

There, click here.

Eight.

Now, we'll give that Jennifer's.

Click on the Temperton.

Between this line and this line.

With the constraints that has been created automatically and double click on Dimensioning.

From this line to this line, this is a value 30 degrees and a dimension from this line to this point.

This is often.

And Jennifer, again, this line and this line you can see here, we have created a problem, which

is we are given land to a line and when we are generating this, it is getting trimmed.

So the length is getting converted into distance between the points.

Click on yes, and you can see the lines are getting trimmed and this length have been retained as distance

between this point and this line.

Now, I'll delete this dimension.

This angle is 45 degrees, let me keep it.

And the distances, five of them, I'll take dimensioning from here.

To this line, this value is 5min.

Similarly, decide also we will create the tempo.

Jennifer, between this line and this line, delay this dimension, double click here.

This value is 30 degrees.

And I'll take dimensioning distance between here to here.

This is 10.

Again, I'll take Jennifer between this line and this line, this is 45 degrees, which is given in

the groin.

So we will keep it.

But this dimension is not required.

I'll do it.

I'll take dimensioning again.

The distance between here to here, this is of value five.

So you can see we have created the 10 percent duffels, now we have to create the circle here.

It is very easy now to create the circle.

You can see there is a lot of interference.

So what I'll do is I'll click somewhere outside and create a circle, then I'll bring it inside by using

the constraints, click on the center and the vertical axis.

Coincidence?

Now, move it a bit down and I'll give the nomination between this center and this center.

This is of value 15.

Now I give the diameter you here change to diameter.

A diameter value of 20.

And we have achieved the fully constrain the geometry of example in drawing a test with this lecture.