All language subtitles for 11. Creating Circles-en_US

From this section, we are going to start to clear circles.

Let me remind you again, when you open getthere, you will by default enter into the product design

interface of a new file.

We want to turn to the party the interface of a new file, or in the other sense, we have to create

a new design file and go to file.

Close this again and go to file and click new.

And in this window and select part, click on OK.

And again, click on OK.

Now, we have entered into the partisan interface of a new file, let us inside the sketcher interface

of the new file.

Click on the sketch.

And click on any plane, maybe this plane.

Now, let us create a circle.

For creating circles.

Like lying, there are two matters, first is Ikon, and the second is go to insert.

Profile circles, there are a variety of options for creating circles will the only circle by center

and radius.

Click on Circle and select the center point, maybe somewhere here.

The second point.

And we can see we have created a circle.

Again, look to see when you click here, these are all options, you'll get it somewhere here.

Under Sakalys.

Click on Circle Icon, click somewhere.

And you can see.

So two points are required for creating a circle again.

Maybe this center.

So this is how we can create a circle.