Original subtitles

Hello and welcome.

So before we actually start modeling the backside of a market,

there is one issue that we need to fix.

One thing that I noticed was

when I was looking through the defense image,

these lines that we have created, like these ones,

are these the only goal

at the front of the model and not at the backside?

Like as you can see over here

in the defense image, there are no lines over here,

but we have added them at the backside also.

Another thing, they are like really thin in the actual models

and we have created them like really, really thick.

So I just quickly want to fix this issue

before we actually proceed further.

So don't worry, It is like really easy to do.

Look, we can start with this first.

So the main object and basically just a slash for the local mode.

So that you can easily focus on this only and not the other objects,

then start to go into the edit mode and delete them.

This three four select

and then hold and select this complete loop

and then hold shift the note and select this completely.

You need to only see these two loops.

Then press x and delete the vertices.

Make sure to delete the word

and you will see everything is removed now

only I think these four edges are remaining so just press do for it.

Select and just select these four edges over here, the top

rest x and delete the vertices.

And now you can see we have this kind of hollow shape.

So we just need to fill in the faces.

It is really easy to do.

Basically, you can start with this big face over here,

so select these two edges and basically just

press F to fill the space in between them.

And now you do not need to do it for each and every single edge.

You can just select this edge over here, then keep on pressing

s like this and you will see it fills out automatically.

Just keep on pressing it here.

Don't go further from here because there is like a space in between.

We need to select these two edges.

This f and select these two edges.

Press F and again selected and and facilities remaining once.

Okay.

And then again, pause over here.

Select this to breast f select these two presets

and this.

Then you can just quickly fill out these spaces

again, select this and now keep on filling

like these do.

This adds this to an s.

All right, so this is done.

Moving on over here, select these two face edges, then press F

And similarly, now you can select this edge over here

and just fill out everything quickly

loaded for the backside also.

And yeah, you can see that we are done so quickly.

All right.

So what we need to do first is we need to decrease the thickness.

So hold right and select this loop or shift and select this loop.

And I want to check the edge forced.

So select Agilent.

You can just select this age and you can see

it is 0.028 meters and this one is also 0.02 meters.

So now we can reduce debt

thickness.

So slide 33 four select hold and select this fold.

Shift the note and select this and now press and X and you will see

when we scale them down, it does not give us

their desired result as the edge moves start moving.

So to fix this it is very easy.

Currently median point to selected for here

and you need to change this to individual audience.

So transform pivot point.

We need to send this to individual audience

because when you say this to individual audience, you will see

they will be scaling down

only over their individual audience and not move at all.

So now we can scale them easily.

So let's check the Agilent over here and maybe I want

to decrease it down to 0.01.

I think that would be pretty good.

Yeah, let's do the same thing for all of them now.

So hold out, select this look, then press spins

and you need to check this edge thickness over here.

So just send this to 0.01.

Again, you can hold shift to decrease the speed

so that you can scale properly.

And the last one is this one.

Again, hold out and select this completely.

And let's see the length over here.

This is and by

next benefit, not all of them are equal.

So what we need to do now is for us

disable Agilent and also done this back to medium point.

All right, so then this loop then hold it and shift.

Select this loop

again by holding shift panel.

Just select all the loops

and now we need to be selected from the back side.

So to make this election you can just all control

and just be selected like this.

Whatever comes in this election would be removed from the selection.

So hold control and just drag out your selection like this

and make sure nothing is over here at the back site.

And yeah, I think now it is pretty good.

So press plus E and extrude face along normal

and just extrude this downward.

All right.

Yeah.

I think this looks much, much better than the one

express slash to come out of the local more

Alexia I think

I margin looks much more cleaner now

and yeah we can now finally start

in the back side of the model so can you guys watching.

I see the next one.

Will you continue modeling the backside of the model

in the next video? So I'll see you there. Thank you.