Amharic
Azerbaijani
Basque
Belarusian
Bemba
Breton
Catalan
Cebuano
Cherokee
Danish
Esperanto
Faroese
Finnish
Frisian
Ga
Galician
Georgian
German
Guarani
Haitian Creole
Hawaiian
Hmong
Icelandic
Interlingua
Irish
Kazakh
Kinyarwanda
Kirundi
Kongo
Krio (Sierra Leone)
Kurdish (Soranรฎ)
Kyrgyz
Laothian
Latin
Latvian
Lingala
Lithuanian
Lozi
Luganda
Luo
Luxembourgish
Macedonian
Malagasy
Maltese
Maori
Marathi
Mauritian Creole
Moldavian
Mongolian
Montenegrin
Nepali
Nigerian Pidgin
Northern Sotho
Norwegian
Norwegian (Nynorsk)
Oriya
Oromo
Punjabi
Quechua
Romansh
Runyakitara
Russian
Samoan
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Seychellois Creole
Shona
Sindhi
Slovenian
Somali
Sundanese
Swedish
Tajik
Tatar
Thai
Tigrinya
Tonga
Tshiluba
Tumbuka
Turkmen
Twi
Uighur
Ukrainian
Uzbek
Vietnamese
Welsh
Xhosa
Yiddish
Zulu
Let's go back to our massive connectors.
There are few things I would like to highlight.
This big one right here.
This is the one that house our motherboard.
Another one that we have,
it's more of a legacy one is for pin Molex.
These connections were used heavily before SATA came out.
Now we use these connectors
to power majority of the SATA devices today.
Most modern machines today will probably use
SATA connectors for your hard drives.
It may come with Molex to SATA adapters.
Now, it's time for the fun part.
First, let's go ahead and connect
our power supply to our motherboard.
That's this big pin, as we discussed earlier.
It's going to go in right here.
Plug that in like so.
Next, we're going to go ahead and power
the CPU with this pen right here.
Pretty tight, but you should be able to get it in.
There you go. What we just did was we
have the power supply is
powering the motherboard and the CPU.
Now that we've hooked up to cable
to our CPU and motherboard,
next thing that we need to hook up are
these cables that are sitting in our case.
This is going to vary from case to
case, but let's go through it.
Some of these cables are used for
your cases, buttons, and lights.
For this one, I'm going to plug these in.
Our case cables are now secured to a motherboard.
One good idea is sometimes
your motherboard will come with some guides.
This will help you fasten your cables to
your motherboard so it's clean and tight on your case.
I'm just going to go ahead and do that right here.
Now that we have our cables
securely fastened to our case,
let's not forget one more thing,
how graphics card we'll
need that so we can upload a video to our monitor.
We're going to plug this graphics card into
our PCI Express lot on our motherboard.
Just like the RAM, you are going to put
a little bit of pressure when you insert the same.
Don't feel bad by putting
a little bit of pressure and you hear a click like this,
which you've done it, you can tightly
secure it to your case.
This is going to vary from case to case.
There you go. Your graphics card has been installed.
I think that's it. Let's cover up our computer.
First make sure you take your anti-static bracelet away.
Get our case put that in like so.
Just plug. That's it.
There you go. We finally built our machine.
Last, but not least,
let's connect our monitor keyboard,
mouse to the desktop.
First, let's get our keyboard.
We're going to do is going to connect this USB
to the USB port on our desktop.
Want to get our mouse, do the same thing,
connect this to our USB port then finally,
we're going to go ahead and connect our monitor.
For this monitor we're going to go ahead and
use a display port cable.
Want to connect one end to our desktop like so.
Next I'm going to plug this into my monitor.
This is the most interesting part.
Let's see if all this works.
I'm going to power it on, I got blue light,
which is good, off course it's
going to vary from system to system.
Let's see if something shows up on the monitor.
Computer is booting up. Let's see.
It looks like the monitor is receiving
signal. Just good it.
There we have messages. Success, there we go.
It's working perfect.
If you're having issues with
your computer not starting up, that's okay.
Check that your power supply
can supply the correct amount of
wattage or make sure
your connectors are in the right place.
Oh, what's this non-system disk or
disk area replace and strike any key when ready.
Looks like our disk doesn't have
an operating system to boot into. No worries.
That's what we'll be discussing in
the next set of lessons.
We'll learn what an operating system is,
and what the main operating systems
are and how to install one.
Well, good job.
You've got your computer up and running and it
monitors were seeing signal so that's it.
Let's take a moment and think about what you just did.
Not only did you learn
about each component of a computer,
but you figured out how they work
individually and then we built one together.
It's quite an accomplishment.
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.