Original subtitles

tutorial 37 the stifinal or it is the real rib if you are familiar with other

cats of the laxolid wars and inventor in the last tutorial we created the strip

through the rib this strip we created it with sweeping the profile we created in

the last tutorials and this time we're going to make a grip with the stifinal

and you can see the stifinal icon here this now before activating it make a line

for the stifinal so it's need only one sketch to create a stifinal and in this

strip we needed two sketches so now let's sketch a line on the top surface to

create another rib with the second method the stifinal so now let's create a sketch

in the top let's be sure that we select the surface and now let's create a line

to be a second rib for this plastic box so now we have this line on the top of

this box let's activate this stifinal and we're okay and here we have this

line and you can choose from top and the next example we will use it will use

it from side but now I will show you the idea how to create drape the same

line the previous one here and here you can specify the thickness let's make 5

millimeter preview 10 millimeter okay so we created a rib with the stifinal it's

save one sketch so this is the idea how to use the stifinal now we can make it a

side stifinal we just need to create a line where we want to make this rib or

stifinal so let's find a plane where to draw so let's choose this plane even you

can choose a plane in the middle of this box but now for saving time I'm going

to make it on this surface sketch and this draw line how you want your stifinal

or a now let's make an angle of 45 okay be sure that is inside here you will not

create any problem even you can make it in the segment with edges now let's

activate the stifinal except the sketch stifinal and now we have it from side

and here you can see the thickness you want it and please okay if you can reverse

but it's not work because it will be outside so just make it in this side okay

so we have our stifinal or rib as it's called in other software