All language subtitles for 06_EN.

This is the third number 6 and in this tutorial I'm going to use the Auto Constraint tool.

We have made this part in the previous tutorial.

To go to the Edit Sketch again you can right click on this sketch.

As you see here on the part tray sketch number 1 right click and sketch one object edit

or simply by double click on it.

And here we have added some dimension in the previous tutorial.

So I'm going to delete all these dimensions and with the relation H, Tlee and here you

can reach the Auto Constraint tool.

Here you can see the Auto Constraint tool.

You choose it and click the part which are going to be constraint.

I'll click the four or some of them.

So now you have automatically added all the constraints and dimensions.

Next one point about Auto Constraint.

Now you have all the dimensions are defined.

You can edit them here as you want.

It might be easier than going to the constraint and back and dimensioning the profile.

But if you want to add a constraint another dimension it's a paper that means it's not

necessary to have this because it's already defined.

So now I can exit the sketch and see you in the next tutorial.