Afrikaans
Akan
Albanian
Amharic
Arabic
Armenian
Azerbaijani
Basque
Belarusian
Bemba
Bengali
Bihari
Bosnian
Breton
Bulgarian
Cambodian
Catalan
Cebuano
Cherokee
Chichewa
Chinese (Simplified)
Chinese (Traditional)
Corsican
Croatian
Danish
Dutch
English
Esperanto
Estonian
Ewe
Faroese
Filipino
Finnish
French
Frisian
Ga
Galician
Georgian
German
Greek
Guarani
Gujarati
Haitian Creole
Hausa
Hawaiian
Hebrew
Hindi
Hmong
Hungarian
Icelandic
Igbo
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kazakh
Kinyarwanda
Kirundi
Kongo
Korean
Krio (Sierra Leone)
Kurdish
Kurdish (Soranรฎ)
Kyrgyz
Laothian
Latin
Latvian
Lingala
Lithuanian
Lozi
Luganda
Luo
Luxembourgish
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Mauritian Creole
Moldavian
Mongolian
Myanmar (Burmese)
Montenegrin
Nepali
Nigerian Pidgin
Northern Sotho
Norwegian
Norwegian (Nynorsk)
Occitan
Oriya
Oromo
Pashto
Persian
Polish
Portuguese (Brazil)
Portuguese (Portugal)
Punjabi
Quechua
Romanian
Romansh
Runyakitara
Russian
Samoan
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Seychellois Creole
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
Spanish
Spanish (Latin American)
Sundanese
Swahili
Swedish
Tajik
Tamil
Tatar
Telugu
Thai
Tigrinya
Tonga
Tshiluba
Tumbuka
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
This is tutorial number 63 and it covers how to use the chamfer feature within KT-AV5.
To start off, open up tutorial part number 59 which is located on the DVD.
Now the chamfer feature can be found in the toolbar over here or if you go to insert, dress up features and you can find the chamfer right here.
The chamfer works pretty much the same as the fillet that we're using in the past few tutorials and what it does is it uses the edges and it'll create a chamfer rather than a fillet like we did in the previous ones.
Let's start doing some.
Let's click the chamfer tool and you're able to flip through some of the modes.
You can have a length and angle or a length and length. It's just two different ways that you're able to position and determine what your chamfer will be and what it will look like.
For the first one, let's just do a length and angle. Let's do it to this edge here.
You can see right now what we have is a 1mm length at a 45 degree angle. Now let's change this to 10. Click Preview.
We can see that green triangle is going to be what our chamfer is going to look like.
Right now it's at 10.45. Let's click OK.
Now we've cut out the chamfer there.
Now let's open the part body and you can find the chamfer in the part body there. If you double click on it, you're able to adjust some of it.
So let's change the angle to 70 degrees. Click OK.
Now let's swap back there. 70 degrees. Click it again. Let's do it 20 degrees. Click OK.
And now it's swept down 20 degrees.
So you're able to play around with these dimensions even after you've already made your part.
Now on the outer edges such as this, you're going to be taking away material and if we do an inner edge here, we're going to be adding material.
So let's click the chamfer and let's click the inner edge here. We'll make it 45. Click OK.
And you can see that we've added material there.
Now let's try and do one that's the distance distance. So let's click chamfer.
So we'll do the length distance distance. And what you're going to get is you're going to get two length.
So if I click this line here and if you zoom in, you can see that I've got for my length one, it's 10, for my length two, it's one.
And it's just going to create it. So if I did a 10 by 10, click preview. Really that's a, the same as having a 10 millimeter chamfer with a 45 degree angle.
So it's just a different way that you're able to parameterize your chamfer definition.
And let's click OK. And you can see that it cut out a 10 by 10 and it's also like a 10, 45.
Now you're able to do more than one edge at a time. So let's select a few multiple edges.
So let's click the chamfer tool. And let's click this edge, this edge, this edge, and this edge.
And let's make it 10 by 10. Click preview. And I'll give you a preview of what it's going to look like. Click OK.
And we've chamfered it off with a 10 by 10.
Now you're also able to choose an entire face. So let's choose this entire face here.
So we'll click the chamfer tool. Click this face here. And we're going to do 10 and 10 all around. Click OK.
And it's done at 10 and 10 all around. Now again, clicking on a face, it saves you some time as all you have to do is click once on the face rather than clicking for separate edges going all the way around the face.
Now let's do one that's around the circle here at the base. So let's click the chamfer tool.
And let's click the length angle. And we'll click the circle down there. Make it 10 and 45. Click OK.
And it's created a material and it's added a chamfer to the bottom. Now let's do the same to the top here.
Let's click chamfer. Click the circle. Click OK. And again, we've added another chamfer to the top there.
So the chamfer tool works pretty much exactly the same as the edge fillet. So you're selecting a single edge, multiple edges, or face to create a fillet or chamfer.
And with the chamfer, you have the option of using a lengthen angle or two lengths to create your chamfer.
And that concludes our tutorial on how to use the chamfer feature within KT of V5.
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.