Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,000 --> 00:00:05,760
This is tutorial number 61 and it covers how to use the face to face fillet feature within
2
00:00:05,760 --> 00:00:07,760
Katia V5.
3
00:00:07,760 --> 00:00:12,960
Start off, open up tutorial number 59 which is located on the DVD.
4
00:00:12,960 --> 00:00:17,560
Now the face to face fillet feature can be found in the tool bar over here or if you go
5
00:00:17,560 --> 00:00:22,160
to insert, dress up features face to face.
6
00:00:22,160 --> 00:00:26,040
So the face to face works just like the other ones except what you're going to do is you're
7
00:00:26,040 --> 00:00:31,040
going to select two faces on the part and you're going to create a fillet between the two
8
00:00:31,040 --> 00:00:32,540
of them.
9
00:00:32,540 --> 00:00:37,680
So to do this, let's start off, let's click the face to face and let's make a fillet
10
00:00:37,680 --> 00:00:38,680
along this edge here.
11
00:00:38,680 --> 00:00:43,680
So we're going to click this face and this face and click OK.
12
00:00:43,680 --> 00:00:47,280
And you can see that we created a fillet right there.
13
00:00:47,280 --> 00:00:52,560
Now you can do it again, let's try this one here, this face, this face and let's make
14
00:00:52,560 --> 00:00:54,800
it 10.
15
00:00:54,800 --> 00:00:59,519
OK, and now we've made a fillet between those two faces.
16
00:00:59,519 --> 00:01:04,640
So this tool allows you to rather than selecting the edges, just select a couple faces that
17
00:01:04,640 --> 00:01:09,280
you see fit and you're able to create a fillet in between them.
18
00:01:09,280 --> 00:01:13,679
So I'm going to click this face and this face and I'm able to create that corner fillet
19
00:01:13,679 --> 00:01:16,080
that I made before.
20
00:01:16,080 --> 00:01:23,280
Now you're also able to do this between either curved surfaces such as this or ones that
21
00:01:23,280 --> 00:01:25,200
there's multiple faces going on.
22
00:01:25,200 --> 00:01:31,000
So let's click this face here, the face face fillet feature, we'll click this face and
23
00:01:31,000 --> 00:01:35,600
click this face and it's going to and we're going to click OK and it's going to go all the
24
00:01:35,600 --> 00:01:38,040
way around just like it did before.
25
00:01:38,040 --> 00:01:44,360
So with this tool, it gives you another degree of freedom kind of more options to choose
26
00:01:44,360 --> 00:01:50,840
the faces and choose where you're going to put your fillet between those faces again.
27
00:01:50,840 --> 00:01:55,080
And this concludes our tutorial on the face to face fillet feature within Katia V5.
2766
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.