Afrikaans
Akan
Albanian
Amharic
Arabic
Armenian
Azerbaijani
Basque
Belarusian
Bemba
Bengali
Bihari
Bosnian
Breton
Bulgarian
Cambodian
Catalan
Cebuano
Cherokee
Chichewa
Chinese (Simplified)
Chinese (Traditional)
Corsican
Croatian
Danish
Dutch
English
Esperanto
Estonian
Ewe
Faroese
Filipino
Finnish
French
Frisian
Ga
Galician
Georgian
German
Greek
Guarani
Gujarati
Haitian Creole
Hausa
Hawaiian
Hebrew
Hindi
Hmong
Hungarian
Icelandic
Igbo
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kazakh
Kinyarwanda
Kirundi
Kongo
Korean
Krio (Sierra Leone)
Kurdish
Kurdish (Soranรฎ)
Kyrgyz
Laothian
Latin
Latvian
Lingala
Lithuanian
Lozi
Luganda
Luo
Luxembourgish
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Mauritian Creole
Moldavian
Mongolian
Myanmar (Burmese)
Montenegrin
Nepali
Nigerian Pidgin
Northern Sotho
Norwegian
Norwegian (Nynorsk)
Occitan
Oriya
Oromo
Pashto
Persian
Polish
Portuguese (Brazil)
Portuguese (Portugal)
Punjabi
Quechua
Romanian
Romansh
Runyakitara
Russian
Samoan
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Seychellois Creole
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
Spanish
Spanish (Latin American)
Sundanese
Swahili
Swedish
Tajik
Tamil
Tatar
Telugu
Thai
Tigrinya
Tonga
Tshiluba
Tumbuka
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
This is tutorial number 43 and it covers how to use the drafted
fillet pocket feature within Katia V5. To start off, open up tutorial part number 42
which is located on the DVD. Now the drafted fillet pocket feature
is found either in your toolbar over here or if you go to insert sketch base
or in your toolbar, you can see the draft fillet pocket.
Now what we are going to do is apply this feature to all of these parts here
and just like the previous tutorial on the pad one, the pocket one is going to incorporate a
pocket, a fillet, and a draft all in one step with the one sketch.
Now let's take a look at the first sketch and the first one is going to be
complete three features all at once. For the first one, let's click this
face here, click sketch, zoom in and draw a square.
And let's dimension the square to 50 by 50.
And we'll center it so it's going to be 25 by 25.
Once you have all those dimensions in, let's go back up
and let's click the drafted fillet pocket.
Let's click it. And then again, you're given the same menu as the pad definition.
For the depth, let's put it to 50.
For the limit, let's click this face here.
And again, you're able to toggle the draft and all the fillets on and off.
So right now let's put everything on, leave everything at five degree and five
mill, and let's click OK.
And you can see that we've been able to cut into the block with the
pad, with a five degree draft on it, and all of the edges have fillets.
Now if you open up the part body under this pocket here, of course you're going to
see the pocket, the draft, and the three fillets that we used.
So again, we're able to go in and change some dimensions.
So let's double click on the draft and let's change the draft angle.
So let's change the draft angle for this one. Let's put it to 12 degrees.
Click OK.
And now you can see that it's opened up and we have a 12 degree draft
on this pocket.
Now let's do this on the circle. Let's click the circle here.
Click Sketch.
And let's zoom in.
Now let's project the outside circle.
And let's do the inside circle.
At the center point, let's make it a diameter of 40
and delete the outside circle now.
We'll go back to the workbench.
And let's use the drafted, filleted pocket again.
Now you're able to change the depth again.
So let's change this depth for this one.
Let's make it farther down into it.
So let's make it 90.
And for the limit, we'll click this face here.
Now for the draft angle, let's put the draft angle to 20 degrees.
And let's take away all of the fillets.
Click OK.
And now we've drafted the pocketed cut 20 degrees into our pad.
Now let's double click on this draft and change the angle.
Let's put it to 10 degrees.
Click OK.
And now we've changed it to 10 degrees.
So now there's no fillets or anything on it.
It's just the draft and the pocket.
Now let's go to our last one here.
Let's click this face here.
Click Sketch.
And let's draw a profile here.
So just draw a unique little profile along here.
Click Tools and make sure that it's closed.
And it's closed.
And let's go back.
Let's click the drafted, filleted pocket again.
This time let's uncheck the angle.
And for all the rads, let's put 2.
And for the depth, let's make it 40.
And for the limit, let's click this face here.
Click Preview.
And we're going to get a little preview so we can see what's going on in there.
And let's change some of these fillets and see how it affects it.
So let's change this one here back to 5.
Click Enter.
And now you can see that all those corners there are bigger at 5.
And again, we didn't have a draft so all we have is the pocket and the fillets.
So let's change some of these fillets.
So the one around the room here, fillet 8.
Let's double click on it.
And let's change this to 7.
And let's see if it'll work.
So let's click Preview.
And it appears that it's going to work so let's click OK.
And now we've changed that fillet to 7.
So again with this tool, it's a time saver as it allows you to do the pocket, the draft, and the fillet all at once from the one sketch.
So after you do it, you're able to also go back and edit either the pocket, the draft, or any one of the fillets.
And that concludes our tutorial on how to use the drafted fillet pocket feature within KT of E5.
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.