Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00.06 --> 00:00:02.05
- [Instructor] This course is an introduction course
2
00:00:02.05 --> 00:00:06.02
to using generative design in Revit and Dynamo
3
00:00:06.02 --> 00:00:08.04
The course is split into two halves.
4
00:00:08.04 --> 00:00:10.02
In the first half We'll be learning about
5
00:00:10.02 --> 00:00:12.03
using generative design in Revit.
6
00:00:12.03 --> 00:00:14.06
And the second half we will be developing
7
00:00:14.06 --> 00:00:17.03
generative design scripts in Dynamo.
8
00:00:17.03 --> 00:00:20.05
While no prior knowledge of generative design is required.
9
00:00:20.05 --> 00:00:21.08
If you're taking this course
10
00:00:21.08 --> 00:00:24.02
I'll assume you have a basic understanding
11
00:00:24.02 --> 00:00:26.04
of both Revit and Dynamo.
12
00:00:26.04 --> 00:00:29.02
We will however learn how to use generative design
13
00:00:29.02 --> 00:00:31.04
in Revit in the first half of the course
14
00:00:31.04 --> 00:00:33.09
with no Dynamo requirements.
15
00:00:33.09 --> 00:00:37.01
In Revit you should be comfortable with basic interactions
16
00:00:37.01 --> 00:00:39.09
such as placing families and line-based elements
17
00:00:39.09 --> 00:00:42.08
and adjusting elements by moving or rotating
18
00:00:42.08 --> 00:00:46.02
along with navigating through the different Revit menus.
19
00:00:46.02 --> 00:00:50.06
At the time of this recording, I'm using Revit 2021.1
20
00:00:50.06 --> 00:00:53.03
which includes the generative design options
21
00:00:53.03 --> 00:00:55.06
required in this course.
22
00:00:55.06 --> 00:00:59.01
If you're using a version of Revit prior to 2021,
23
00:00:59.01 --> 00:01:01.06
you won't have these included with Revit.
24
00:01:01.06 --> 00:01:04.04
However, you can use the generative of design processes
25
00:01:04.04 --> 00:01:06.02
We explore in Dynamo
26
00:01:06.02 --> 00:01:09.03
by signing up to the project refinery beta,
27
00:01:09.03 --> 00:01:12.08
which I'll show you how to do later on in the course.
28
00:01:12.08 --> 00:01:14.05
In Dynamo I'll also assume
29
00:01:14.05 --> 00:01:16.00
that you have a good understanding
30
00:01:16.00 --> 00:01:19.02
of how to use the base nodes available in Dynamo
31
00:01:19.02 --> 00:01:20.09
along with geometry concepts
32
00:01:20.09 --> 00:01:24.02
such as points, factors and curves.
33
00:01:24.02 --> 00:01:25.09
Finally, you should be familiar
34
00:01:25.09 --> 00:01:29.06
with working with different data structures such as lists.
35
00:01:29.06 --> 00:01:34.08
In this course, I'll be using Dynamo version 2.6.1
36
00:01:34.08 --> 00:01:39.05
which comes with the latest update to Revit 2021.1.
37
00:01:39.05 --> 00:01:40.09
If you feel like you need to brush up
38
00:01:40.09 --> 00:01:44.03
on the basics of Dynamo or Autodesk Revit,
39
00:01:44.03 --> 00:01:46.06
there are plenty of Dynamo and Revit courses
40
00:01:46.06 --> 00:01:48.04
to work with right here on LinkedIn.
3295
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.