All language subtitles for 72 - Copying and Pasting Adjustments

There are some additional
important options in the develop module

that we should explore before we start
working with the image adjustments panels.

The first is the ability to copy
a set of image adjustments

and paste them into either one
or multiple images.

See, for example,
I increase the exposure and temperature

of this photo in my adjustments panel.

I've created a fairly dramatic effect

just so we can see the difference
in the second image.

We apply these adjustments to
if I want to copy these adjustments

and apply them to a second photo
in my catalog.

All I need to do is click the copy
button here.

A dialog box
then appears with a set of checkboxes.

Here we can specify exactly
which adjustments

we want to copy
and which ones we want to exclude.

We only made two adjustments,
so if I click the check all button,

the two adjustments I made

will definitely be covered
in at least one of these categories.

For example,
the exposure adjustment is located

in the basic tone adjustment group.

I could uncheck this,

but if I check it back, you'll notice

that all of the adjustments
within this group become activated.

Now we'll go ahead
and press the copy button before I paste.

I'll need to bring up another image
in the developed view.

This will be the image
that I want to apply these adjustments to.

So I'll go ahead and pick this image here.

Now all I need to do is click the paste
button and the set of adjustments

we made on our last
photo are not are now applied to this one.

Take a look at the
temperature in the exposure.

This was the original

and this is after the paste.

So you can see the temperature
and exposure

went up by the same amount
that we'd applied to this image.

Plus 45 plus 2.35.

So remember, if you want to remove
these adjustments we just applied,

go ahead and click the reset button
and I'll do the same for this image here.