Original subtitles

welcome to how it's fixed in today's

video we will take out the fender for

2017 Toyota Corolla the very first step

is the lift up the car because this will

help us to make some space and we take

out the necessity clips and bolts we

then start the takeout process by taking

out clips and Bolts from the bottom from

right side and then left side and then

finally from the top so let's jump into

this

in the middle we notice there are some

straightforward Clips I'll be using the

Dora pull Street remover to take out

those clips the middle clip already came

out due to an accident

[Music]

we need to turn the tire to take out two

screws from the mud guard

[Music]

foreign

those two screws are taken out there's

actually a 10 mm screw right underneath

the mud guard and we need to take that

out as well

once mudguard is taken out now we need

to take out the clips attached between

the fender liner and Fender

Clips like these have two arms you just

have to push both arms one by one to

take these clips out

the same we do for the bottom clip

[Music]

this guy came out with a slightly

different approach

[Music]

moving on there's also a clip right

underneath and honestly we tried really

hard to take it out properly but it was

just so much stubborn and I ended up

breaking it

foreign

[Music]

might as well take out those two 10 mm

screws attached with the bottom of

Fender for some reason they have really

thick paint on them so make sure you

really push hard to take out those two

screws

[Music]

foreign

[Music]

pull the fender don't be surprised to

see the dirt coming out of it

now we open the front door there's

actually a screw right in the middle of

the fender and the door and we have to

take out that 10 mm screw

there it is

but we notice the fender is still not

losing its grip there is something

holding the fender right behind

[Music]

to figure out we have to take out the

end clip of fender liner

another mudguard type clip

the inside cover needs to come out

[Music]

and we have to take out that square

shaped clip for that

[Music]

once done now we have to pull the cover

right and left until the time it's

completely taken out

[Music]

there we see when 10 mm screw hidden and

we have to take it out

[Music]

we would notice now the fender is losing

its grip we also take out the mirror

finisher because there is one 10 mm

screw right behind

now we jump on to the left side okay so

this bumper side in my case it's already

broken in the perfect world you're

trying to take out the fender what you

do you take this clip out which is on

the corner of the bumper and then you

pull the bumper slightly Once you pull

the bumper you would notice there are

two screws one here

and then one there but those two screws

are on the bracket so you have to take

out the bracket and the fender both

together I hope I was able to understand

it properly in my case they've already

came out so I'm not able to demonstrate

to you guys but since I was pulling this

off I noticed there is that screw left

to be opened I don't know if I can show

it to you properly yeah it's right there

so I need to take that screw out I'll be

putting my arm inside and we'll be

taking it out with an mm wrench

so I tried multiple times to take out

that screw but that screw is actually

turning out along with that bracket

reason why that plastic bracket is

actually broken yeah there's no way it's

going to come out since the plastic

bracket is actually broken behind so

there's no point of taking that screw

out now we jump on to the other screw

which is right underneath

[Music]

so we are heading towards the final step

we open the hood and take out the

necessary three screws from top of the

fender

[Music]

foreign

screw is actually towards the windshield

covered under the plastic piece

followed by another glued plastic piece

which we slightly need to pull

[Music]

there you would notice the final 10 mm

screw which we need to take out

[Music]

all screws are taken out now we gently

pull the fender

[Music]

remember in my case the plastic bracket

was broken and I was not able to take

out the screw but in the perfect world

if you're trying to take out the fender

you have to take out this 10 mm screw

just wanted to touch base on that before

we move forward

that was it we ended up taking out the

fender completely if this video helps

you in any way please consider liking

this video and subscribing to our

Channel

here's the section for our other DIY

videos feel free to take a look at them

and I'll catch you in the next video