Original subtitles

Hello everyone and welcome to this new class in

where we're going to start our work project.

We will start with the Barcelona Pavilion.

So let's go over a file import.

Here, I will pick up the floor plan.

One click on the iridium,

and we have to rescale the image.

We have here a graphic scale.

So it will be very easy.

Tape measure tool, one click and release, second click.

The measure has to be 10 m.

Then enter.

Do you want to resize the model?

Yes.

As you can see, I'm working faster because here,

let's say that we are in

the third level during this work project,

I tried to not explain many things.

It will be more practical class where I tried to

work more or less like in my normal workflow.

We have the theoretical classes in where I explain a lot.

Then we have the normal exercise

in where I go one step forward.

There is less theory and more practice.

And this is the third level, as I told you,

in where there is no theory because

the theory is already explained,

more practice and more speed.

So coming back to our drawing,

the image is already resides.

We can check that here we

have nor the direction of the north.

We will use it in the future.

We can take as well that we have different walls,

different furnitures, glasses,

the entrance here and here.

This is the swimming pool.

We have two swimming pools.

This one and this one.

I recommend you any way to

check the different images that

I attached with the course to

get familiar with this building.

But anyways, I will

start drawing the podium of the building.

So camera, parallel projection,

top view here, maybe we're more comfortable.

We can use the line tool. That's a start.

We have finished our podium.

We could orbit, and here

we will need the high of this podium.

In order to get this high,

we will need to use

different peaks that I attached with the course.

And more or less,

we have to guess that high,

I would say that it is 1.55 m. So P post pool 1.55 m.

We have the podium already drawn.

And now if we want to follow the image,

we would need to place again

the image on the surface of that podium.

So I will select it and I will move it from e.g.

this point to this one.

Now we have the image on the surface of the podium,

and we could use the X-Ray in

order to watch through that phase,

I see what is going on on that surface.

Next step here will be to draw the swimming pools,

these two swimming pools,

this one and this one,

because let's say that those swimming pools are

part of the podium kinds of holes.

So I will use

the tape measure tool in order to draw a guideline.

Right-click on here.

And this distance is important because it will

be the thickness of the walls you will see later.

So let's say that it is 0.16 m, 16 cm.

Enter.

Now I'll use the rectangle tool one click on here,

and second click on this corner.

We have a new phase that we will post later.

Let's go with a second swimming pool.

We will use the same process.

So letter T, 0.16,

that distance will be

the thickness of our wall here as well.

Another guideline on this side,

0.16 rectangle tool, one click here

on the corner and another click on the opposite corner.

We can check that we have created a surface.

So now let's switch off the X-ray.

I will hide my image and I will post

this phase in order to

create the depth of the swimming pool.

That depth will be 0.3 m.

Two clicks here for repeating that last axiom.

Once here, I will select all my podium and I

will create a group time now for drawing the walls,

Control U, that is the data for unhide, the last object.

In this case, the image we can switch on again the x-ray.

And if we don't have a shortcut,

maybe is high time for creating it.

So let's go over Window Preferences.

And here we go over shortcuts.

The filter would be x ray.

We can find the function here,

view phase style X-ray,

and we should add a shortcut letter X.

In my case.

Click on here and okay,

so now I hit letter X and I switch on the X-ray.

If we are still not able to

recognize the lines of the walls,

then we can change this view is

Style and go over wireframe.

Now we can appreciate much more better those lines.

I will start drawing this wall here

so we can see that it starts at this point,

all our podium is inside a group box.

So if I draw something here,

isn't gonna be glue with anything else.

So top view line tool now,

one click on here,

0.16, because I want the same thickness everywhere.

Then I move along the red axis.

I can block that red axis field here, green axis.

I can lock it as well till here.

And I close this surface of this first wall,

like we are working now on this wireframe view.

We can't see the faces.

Let's move over, say that with textures.

And let's check that we have created that phase that

will be extruded with a caret high it is there.

So everything is correct.

Postpone tool.

The high this time will be 3.1 m. Here we are.

We have our first wall and now we have just to

continue around the perimeter letter T guideline.

Here, 0.16 L, we

create this face letter P and we extrude this wall.

Here. We could repeat this same process.

Letter T, 0.16, letter

L. We use the guideline letter P tilde.

Here we are with again the same

0.16 letter L P here.

Now we can check the photo again.

I switch on the X-ray.

I could erase these guidelines

if I am a little bit confused.

Now we have another wall here.

So let's do it.

We can use the rectangle there.

We'll start here.

We'll finish this more or less.

Here, the thickness will be 0.16.

I check the dimensions bar to adjust that thickness.

And second click, we check the face.

Postponed tool, 3.1 m.

I am all the time working with

the parallel camera view on.

So if I want to change that,

I can go over camera perspective.

This is up to you.

Let's go now with this,

another wall which starts

here and it goes along this perimeter.

It turns left here around

the swimming pool and it will finish more or less here.

When it becomes IN of glass.

Then we will find two more walls.

This one and this one.

We can check the photos whenever we need.

As you can imagine, I know

this building as the palm of my hand,

but you will need some time to get familiar with it.

So let's start this wall here.

And this time we'll use another way for drawing.

Another tool.

This time we'll use the Follow Me too.

Because actually we know the path starts here.

And as we said, it goes over this perimeter around

the swimming pool and finishes

more or less here when it becomes a glass.

So we'll draw the path and withdraw as well.

The surface that we want to follow that path.

Let's start with the letter L.

It starts here.

One quick second click on this corner.

Click on this, another corner of the swimming pool.

Third, click here.

At this point, we have the path.

Let's go with the Surface line tool.

I draw this first line along the blue axis.

Now when x is 0.16,

and then I can close this phase easily.

We have the face and we have the path.

So we choose the path.

First click hold down Shift

key for adding elements to my selection.

Once we have the path,

Follow me and one click on my face.

Here we have our wall perfectly

drawn and I think that it could be more rapid.

We are close to finish.

We need just those two walls. More.

Rectangle starts here, and it will finish here.

The thickness is 0.16,

So I adjust that thickness and I keep that length.

Second click Postpone tool.

I can use the height of any wall as a reference.

And let's go with the last one.

Rectangle tool starts here and it will finish here.

Again. I take the thickness.

Here we are.

And finally, the walls are done.

We can hide the meds and erase the left overs.

So summing up the most important things here, first,

draw the podium and make that podium

group because we don't want

the walls to be glue with that podium.

After modelling the podium,

we will start with the walls step-by-step

using the x-ray and sometimes the wireframe view,

we will draw those words using always the same thickness.

In my case, 0.16 m,

the height will be 3.1 m.

And once we have finished with all of them,

is time again to make groups.

So I will make a group with this wall,

another group with this another wall.

Look here, e.g. I.

Made a group and the group box is quite big,

much more bigger than it should be on.

For me, this is a signal that there is an error here,

not an Iraq, sorry,

but in my selection,

Let's say that I had to grab something else.

Then that's something is inside the group.

That is the reason because this box is so big.

So when a step back and I repeat,

my selection, may group.

Now we can check that

the group box fits perfectly with the wall.

That is the good side.

Now, another group with this,

another wall right bottom, make group.

Another one with this one.

Look that I selected some lines here.

Which item want?

So I will repeat the selection this time.

I will click three times on my wall.

Right button, met group, the same here.

Three clicks, 123, everything

is perfectly selected, right bottom.

Make group.

Now, everything is perfectly organized.

We have one group for the podium,

including the swimming pools

and different groups for the different wolves.

Sometimes say goodbye.

If you have any doubt,

don't hesitate to leave a comment,

and we will continue modeling

the Barcelona Pavilion in the next work project episode.