Original subtitles

Hello people.

Let's go with this next exercise in where

we are going to draw in two D artists ****.

So first of all,

we have to import an image.

I'll go over File Import here.

Again, as in the previous exercise,

one single click on the image we want to import.

Here.

We make sure that we are using

the image as an image in this window,

all supported image types.

Then import, first click on the origin,

and then we can add

just the scale of the image. Here we are.

Let's go over camera,

parallel projection and top view.

Once we are here,

we are ready for drawing correctly.

So let's use some of the tools that

we already learned during the previous lessons.

Firstly, we have to draw a cycle here.

So cycle sites that say 50,

guess more or less.

Where is the center of this cycle?

One single click and release.

Let's go with the radius still here more or less,

our surfaces are covering the emails,

so I will use the X-ray style.

We can check now that our cycle, our circumference.

This is still a little bit Sharpie, right?

We've changed the sides.

Now we have 50, but it's

not still smooth enough, in my opinion,

at least scale in case that we want to change

the number of sites when we have already drawn the say,

We can do it just by selecting the element.

I'm going to Entity Info.

Here. It is said that it is a circle.

We already know that the tag,

the radius and segments, segments.

So here we can say 100 Enter,

and now the figure is completely smooth.

One single click outside for unselect the element.

And let's go with the next.

Say.

I will pan swimming.

And then we can see that all of

these elements are based on symmetry.

We haven't learned yet how to do symmetries.

But anyways, we will take this into consideration.

So I will use an auxiliary line in

order to draw that symmetry axis,

assign it a vertical line.

I will draw e.g. a.

Rectangle here.

Then auxiliary line, one, single click.

I move my mouse still the center of the cycle.

Second click, and then I have my symmetry axis.

Once I have it, then I could use

the Rectangle tool, e.g. letter r.

From this point till here,

I will check my dimensions because I want

the same length for

these right rectangle than for the left rectangle.

Here we have 0.53, right?

Second click, and I will

repeat this rectangle to us the other side,

then it is time for the cycle letter C, sites 50,

we can say 100 if we want,

then I sue in mid point radius still here,

and we repeat the same drawing in this other side.

Then letter E for the eraser,

click and drag in order to delete all the edges.

I don't want for deleting these ads.

If I use the eraser,

I will delete as well the cilia line.

So then the space key and I will create

a selection box from left to right to

select just all the complete objects.

Then my head is selected

and I tap delayed and it is done.

Let's go now with this Another big shape.

First of all, be careful with

not orbit because in case that you are worried,

you will lose this top view.

And then you will need again to go here.

Use letter H, e.g.

for panning and adjust the camera position correctly.

Another option if you orbit is to use

this tool previews in where

you would undo to the previous camera view.

Now I will use the line tool.

First click here, second click here, length 0.39.

I repeat the same length to the opposite direction,

even when I can check that

my line here looks longer than the image,

but this is the correct one, length 0.39.

Length 0.39.

We have to use the image only as a reference.

So let's go with this left side.

Here we have a complicated curve because it is

like one piece of

the curve could be this one till here more or less.

And the second piece of the curve is this one.

So we will need to use the two point arc twice,

and both are, of course,

we'll have to be tangent

between each other in order to create

a continuous curve from this beginning point till here.

So two point arc sides,

24 at this first here,

I am assuming t more or less here.

Second point, and then I adjust the depth of my yard.

0.02 is okay for me. Here we are.

Let's go with the second arc,

first point, second point here.

And I check the length, 0.70,

1 s. Click, click without moving the mouse.

Perfect.

Let's repeat this curve in the other side.

In order to be precise,

I will use an auxiliary line here.

Here, then again, two-point arc.

First click, second, click 0.02, right?

Okay, second arc, first point, second point,

it was 0.71 without moving the mouse.

Second click on Insert click here we are.

Letter L for the line.

We close the figure them out swimming later,

our rectangle from here to here,

more or less Dimensions 0.78 in the red box.

Second click, I repeat that rectangle here,

then cycle, Let's see.

Strike call letter E for the eraser,

I can click and drag and I am going to

delayed just the SDS, the surfaces.

Here, I have to make a selection box from left to right.

Let's repeat this same operation for the last time.

This time I will use the line tool letter L,

length 0.92, assuming I close my figure, very easy.

Length 0.92, I use the inference and I close my figure,

letter c For the cycle.

Again, letter E for the eraser.

Now for selecting these ads,

I will use the Selection Tool Space

key one click on this.

Delete, zoom out.

We have already finished.

I can relate the auxiliary lines,

this element as well.

I can orbit.

Finally, switch off the X-ray style.

If I wanted to delay it very much,

I could do it easily just by one click.

So before closing the file,

Let's go over File Save As chess poem,

because we're going to use this file in

the future in order to play with it.

We will rotate it,

we will scale it.

And of course, we will create a 3D model.

So time to say goodbye.

And in the next class we will start doing

another exercise where we will

continue increasing the difficulty.

This time, we will draw a house plant floor.