Original subtitles

1

So we've seen two methods to enable monitor mode and I'm going to explain a third method now all these

2

methods achieve the same object which is enable and monitor mode on your wireless card.

3

And the reason why I'm explaining so many methods is because Which method work for you depend on your

4

operating system on your host operating system and on the cop compatibility of the wireless card with

5

both of these systems.

6

For me all three methods work is fine but some people that have the first method worked for them.

7

For some people the second or the third.

8

Now in many cases all of the methods will enable monitor mode on your card but not all the attacks will

9

work.

10

So sometimes maybe the injection will not work.

11

Or maybe creating a fake access point will.

12

How these things will get explained them in the future.

13

So don't worry about them but basically what the idea is to take from here is if you know your card

14

supports injection if it's an alpha card like the 0 3 6 stage or 0 3 6 and A-ha or what are the non-cursed

15

that support injection if you Google the name of your card and injection isn't working for you or the

16

card isn't working well for you then all you have to do is just unplug the card plug it back in and

17

try another method of enable enabling monitor mode.

18

So so far you have two methods and I'm going to explain a third method to enable might have more.

19

Now if any of the methods above work well for you then stick with it.

20

If they don't then try this method to enable monitor mode.

21

So I have my wireless card that connected.

22

And as you can see here it's called Dunn-Jones my Atheros card.

23

So I'm going to do is I'm going to disable the card just as you do also if can't Ignazio down.

24

And what I'm going to do now I'm going to run a command to kill any service that might interfere with

25

enable and monitor mode.

26

So the command is Ehrmann and Angie

27

check kill

28

and there's no g here.

29

And as you can see it killed three processors or two processors right now that Ehrmann think might interfere

30

with enable and monitor mode.

31

So I'm going to do now enable monitor mode the same way that we did in the first method.

32

So it's going to be Ehrmann and you start on zero.

33

Now as you can see a monitor mode has been started on LAN 0 1 which is virtual wireless interface.

34

So I'm going to do config

35

and as you can see the mode is monitor now as I said all the three methods achieve the same goal.

36

All of them enable monitor mode and in the future we're going to use this monitor mode and doing different

37

attacks.

38

So if the attack doesn't work for you all you have to do is unplug your card plug it back in.

39

Try another method of enabling monitor mode and hopefully one of them will work well for you and you

40

can carry out the attacks.