Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:01,170 --> 00:00:06,660
Now let me show you how to connect to a hidden network because the process is a bit different than connecting
2
00:00:06,660 --> 00:00:08,060
to a normal network.
3
00:00:08,070 --> 00:00:13,710
The main thing is since I was using Aradigm energy I put my wireless card in monitor mode.
4
00:00:13,710 --> 00:00:19,380
So if I go and try to connect nothing's going to happen and I won't even be able to discover networks
5
00:00:19,380 --> 00:00:25,380
because as we said before you can't connect to networks when you're in monitor mode monitor mode is
6
00:00:25,380 --> 00:00:33,150
only used if we wanted to capture packets that are not even sent to us so it can't associate with one
7
00:00:33,150 --> 00:00:34,390
specific network.
8
00:00:35,940 --> 00:00:41,230
So to connect to a network you need to be in managed mode which is the default mode.
9
00:00:41,370 --> 00:00:46,170
So you can put your card back in manager mode by doing airman ngi stop
10
00:00:50,140 --> 00:00:51,820
and then you put the wireless card name.
11
00:00:51,820 --> 00:00:56,370
So if you started it using the first method or the third method you're going to do.
12
00:00:56,470 --> 00:01:04,110
Your Almont or in my case I started to monitor mode use in the second method.
13
00:01:04,160 --> 00:01:11,200
So I'm going to have to do either config 1 0 mode managed
14
00:01:13,980 --> 00:01:20,920
of course and both of these cases you have to bring the card down do that and then bring the card up.
15
00:01:21,330 --> 00:01:22,710
Now an easier way to do this.
16
00:01:22,710 --> 00:01:28,470
And just to avoid all confusion regardless of the way that you enabled monitor mode all you have to
17
00:01:28,470 --> 00:01:30,200
do is just disconnect the card.
18
00:01:30,210 --> 00:01:36,170
So that's what I'm going to do physically disconnect my wireless card and then be connected back.
19
00:01:36,440 --> 00:01:42,340
Now when you do this if I do ifconfig you won't even see the wireless card in here.
20
00:01:42,370 --> 00:01:48,670
So we have to go back to the devices menu us me and attach the wireless card.
21
00:01:48,670 --> 00:01:51,340
And for me it's called Atheros right here.
22
00:01:51,460 --> 00:01:54,880
So if I do that that's going to connect my card again.
23
00:01:54,910 --> 00:02:04,520
So if I do have config you'll see that I have my LAN 0 and if I do either Blue config you'll see that
24
00:02:04,520 --> 00:02:07,780
my line zero is back into managed mode.
25
00:02:08,030 --> 00:02:14,090
So it's in the default mode and I can use it to connect to networks now to connect to the network we're
26
00:02:14,090 --> 00:02:17,090
going to go to settings.
27
00:02:17,120 --> 00:02:24,040
I'm going to click on all applications and I'm going to go to settings and I'm going to go on network.
28
00:02:24,350 --> 00:02:30,230
Now if you actually if you enabled monitor mode using the third method if you go on networks you won't
29
00:02:30,230 --> 00:02:33,900
see anything again it's going to say that your network manager is off.
30
00:02:33,920 --> 00:02:36,250
So if it looks like this that's fine.
31
00:02:36,320 --> 00:02:42,190
If it doesn't look like this then go back to your terminal and run or start the network manager again.
32
00:02:42,200 --> 00:02:47,540
Because when you do Ehrmann and you check kill that kills the network manager.
33
00:02:47,540 --> 00:02:51,620
So just do a service network manager
34
00:02:54,880 --> 00:02:58,520
and that will start the network manager for you come back here.
35
00:02:58,570 --> 00:02:59,890
It should look like this.
36
00:02:59,980 --> 00:03:02,810
And if it's looking like this then everything is perfect.
37
00:03:03,040 --> 00:03:08,050
Now since we want to connect to a hidden network you won't see the network that you want to connect
38
00:03:08,050 --> 00:03:11,540
in here so you can see that I don't have my target network in here.
39
00:03:13,350 --> 00:03:20,540
So I'm going to go on Connect to a hidden network and then it's going to ask me for the network name.
40
00:03:20,580 --> 00:03:22,950
So I'm going to put test a.p like we see in
41
00:03:27,690 --> 00:03:35,180
Cousin here if we go back to the result of a dump and you you'll see that the name of the network was
42
00:03:35,480 --> 00:03:41,160
test AP then it's going to ask me to put the security of the network.
43
00:03:41,160 --> 00:03:47,510
So again if the network is using WEP or WPA or WPA too then you can specify it from here.
44
00:03:47,520 --> 00:03:50,160
In my case it's not used in anything so it's not.
45
00:03:50,170 --> 00:03:56,550
So I'm just going to connect and as you can see I managed to connect to the network.
46
00:03:56,770 --> 00:04:00,330
If we go on the settings now this network actually does not have internet connection.
47
00:04:00,330 --> 00:04:02,760
That's why there was very low data going in.
48
00:04:02,980 --> 00:04:05,690
But as you can see I'm connected to the network.
49
00:04:05,770 --> 00:04:07,520
I have a good signal strength.
50
00:04:07,570 --> 00:04:14,530
I've got an IP address and I have the IP address of the default gateway and I can do anything I want.
51
00:04:14,530 --> 00:04:18,160
Now on the network because I'm fully connected to it.
52
00:04:19,510 --> 00:04:24,910
So when it comes to connect into a network you need to keep in mind that your wireless card has to be
53
00:04:24,910 --> 00:04:27,010
in managed mode not in monitor mode.
54
00:04:27,210 --> 00:04:29,400
There is a number of ways to do that.
55
00:04:29,410 --> 00:04:35,800
The easiest one is just to physically disconnect the card connect it back and then look for the networks.
56
00:04:35,860 --> 00:04:41,530
If you go and look for networks and it tells you that the network manager is down if it's off then all
57
00:04:41,530 --> 00:04:47,770
you have to do is just run Service Network Manager start and that'll start the network manager for you.
58
00:04:47,770 --> 00:04:53,320
Then you can come back connect to the network put the network name and then you'll be able to connect
59
00:04:54,400 --> 00:05:00,460
as I said hidden networks can make a major obstacle because if the network is open you won't be able
60
00:05:00,460 --> 00:05:05,490
to connect if the network is using a password then you can't even start doing the attacks that we're
61
00:05:05,490 --> 00:05:08,600
going to talk about until we know the name of the network.
62
00:05:08,830 --> 00:05:12,740
So your first step is always you need to know the name of the network.
6883
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.
Afrikaans
Akan
Albanian
Amharic
Armenian
Azerbaijani
Basque
Belarusian
Bemba
Bengali
Bihari
Bosnian
Breton
Bulgarian
Cambodian
Catalan
Cebuano
Cherokee
Chichewa
Chinese (Simplified)
Chinese (Traditional)
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Finnish
Galician
Georgian
German
Greek
Guarani
Haitian Creole
Hausa
Hawaiian
Hebrew
Hmong
Hungarian
Icelandic
Indonesian
Irish
Italian
Japanese
Kazakh
Kinyarwanda
Kirundi
Kongo
Korean
Krio (Sierra Leone)
Kurdish
Kyrgyz
Laothian
Latin
Latvian
Lithuanian
Luganda
Luo
Luxembourgish
Macedonian
Malagasy
Malay
Maltese
Maori
Mauritian Creole
Moldavian
Mongolian
Myanmar (Burmese)
Montenegrin
Nepali
Norwegian
Pashto
Persian
Polish
Portuguese (Brazil)
Portuguese (Portugal)
Quechua
Romanian
Romansh
Russian
Samoan
Scots Gaelic
Serbian
Sesotho
Setswana
Seychellois Creole
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
Spanish
Swedish
Tajik
Thai
Tigrinya
Tonga
Turkish
Turkmen
Ukrainian
Uzbek
Vietnamese
Welsh
Wolof