All language subtitles for MODIFICATIONS subs.mp4

Modifications and warranties.

Here are some examples of modifications

or future modifications
that potentially could create a problem

but can easily be avoided
with some basic property.

Knowledge gardens in dwellings.

Houses. Rooms.

The gardens or yards have underground
tubing.

Many homeowners will want to plant bushes,

flowering plants
or palm trees in order to do this.

It's necessary to be aware
of the locations of the underground

tubing
or the pipes to avoid unnecessary damage.

There are two lines in this area
a hydraulic installation line

and an electrical installation line.

Before starting any landscaping project,

the homeowner will need to be sure
of the location of these lines

because if any of these installations
are broken, it is not a warranty issue.

It could be a damage caused by
the installation of a tree or a palm tree.

If you decide to install planter boxes

near or against the exterior of your home,

it is important that you consider
installing a barrier

between the planter box
and the home's exterior,

because the moisture can create humidity,

which can permeate into
the home's interior walls.

Modifications to the service patio.

The yards of the town.

Homes have a drainage system in place

that will properly drain rainwater
from the roof.

It is very important
that the property maintains

a slight slope away from the exterior
walls of the home.

If this outward slope is compromised,

the rainwater will accumulate
around the foundation of the home,

causing humidity and potential water

damage to the interior of the home.

Modification in the installations.

There are also hydraulic installations
in the utility room of the condos

when making modifications to this area.

It's important to not damage these lines

as it will result
in voiding your warranty.

There are also hydraulic lines
for the heater.

The hot and cold lines run
vertically to the floor.

When installing a heater, you will need to
make sure these lines are not damaged.

If you plan to install a pressure pump
for your water,

it is important to install it
in the utility room inside your home

as it is not allowed, by the way,
to be placed on the roof or

any other common area.

Here is an example of how a

water pressure pump
should be placed inside your home.

You will also need
to take into consideration

that this wall contains pipes,
so you will need to be careful

not to damage them during the installation
of the pressure pump.

For modifications to sinks,

wash basins, toilets and showers.

It's very important
to check the technical specifics

of the equipment you plan to install
to make sure that it is compatible

with the pressure
of the hydraulic installations in all.

You will need to make sure
that the pressure of your house

corresponds to the pressure
demanded by the mixer.

Both of the sink and the sink
you want to modify since the new mixer

will not function properly
if it is not compatible.

If any type of modification is made
to the hydraulic

and electrical installations,
it will result in a void of warranty.