All language subtitles for 3D+canvas module

In this 3-D and canvas module,

I'm going to start
with an ESCO custom design.

Why did I choose this file?

Because there's different
materials acrylic, ACM of two millimeters

and 3:50 gram folding carton
for the little boxes

in the canvas module.

Each piece is in its own window.

I renamed each part by clicking on it
and added some graphics with this.

You can much easier
see the different materials.

They are regrouped by material,

and for designers,
there's less mistakes and confusion.

The number of pieces is also
clearly written on top of each window.

It's for production or not.

Let's go to 3D now.

We're going to easily incorporate
this piece into the main body display

with the main tool, click on one edge
and then the other antenna.

It's easy as this.

So now add some hardware you can choose

and our whole library,
but you can also customize it if you want.

Once you selected the hardware
you want, just click on the pack

and the software will calculate
even the space in

between the packs, then just add
the amount of packs that you want.

Click on your surface,

then choose your box.

You also have a repeat button.

Check this out. If I put one pack
more on purpose.

Look, it's on red, so it tells you warns
you that it's not going to work.

Last one and then we're done.

I wanted to show you
the back of your display,

as you can see, the holes are made in it.

But if you go back to you, R.D, you

can see that your
3-D passes the info to your A.R.T.

and creates the hole and also puts
the hardware in the software.

So what's your feeling?

Wasn't that easy before

you had to do everything manually
and it took ages?

Now you have it all in one click.

You like this, you want to see more, huh?

Watch our 3-D studio fill.