Original subtitles

1

Virtual box network settings.

2

So let's set up our virtual network.

3

It is of course required to use virtual box because we really do want to avoid accidental damage to

4

actual systems during this cause.

5

So therefore we will ensure that all virtual machines that we are going to be using will be on the same

6

virtual network so the network has the ability of multiple devices to communicate with each other.

7

You know that right.

8

It's either going to be wired or wireless and we can use this to connect a network device typically

9

so we will can figure the net network so that all virtual machines that we're going to be using are

10

on the same network.

11

Now when we create a net that word Oracle virtual box will be the program that will automatically assign

12

an IP to all the computers in this network the IP of course is the address it is required for a computer

13

to communicate with other computers over this network and each computer has to have its own or different

14

IP.

15

In fact each computer connected to the Internet has a different IP address the IP refers to the address

16

for computers the address of each computer.

17

It's got to be different the IP address is available in two different versions.

18

IP V4 and IP 6 now widely used across the world as IP for its 32 bits and it consists of 4 8 bit numbers

19

each separated by dots.

20

So here's an example.

21

1 9 2 to 1 6 8 that one dot one now each.

22

No group can have a value between 0 and 255 so if there are two computers with the same IP there will

23

be IP conflicts in the network so in order to prevent this DHS GP or Dynamic Host Configuration Protocol

24

is use and what DCP does is assign a different IP to each computer.

25

So therefore you don't have an IP conflict right so that establishes the network so we'll click file

26

like preferences and click on network and now click add new network on this screen and click on the

27

arrow and then exit.

28

Now the virtual machines will need to get into this net network.

29

So click virtual machine and click settings and click on network on the incoming screen so on this screen

30

select net network from attach to and click on the arrow and then you can follow the same process for

31

your other virtual computer's.