Original subtitles

So he has brought a 1

show IP interface brief shows us the IP addresses configured on the router he has the loop back interface

has the IP address on gigabit zero slash zero slash a zero.

So the first thing we need to do is configure an exclusion range so IP DCP excluded address 10 1 1 1

2 10 1 1 100.

The next thing we need to do is configure a DHB pool called P.C. the network to use a 10 1 1 0 with

a subnet mask of slash 24 with any to configure a default rota or default gateway of tender 1 1 2 2

5 4 because that's the IP address of write a 1 so the default Rodda will be that DNS server will be

the router and that looks good.

So show run these exclusion range and there's our DHB pool show IP DHB binding our client has already

been allocated an IP address 10 1 1 1 2 1 so let's confirm that by opening up a command prompt IP config

there's the IP address of the P.C. there's the subnet mask there's the default gateway can the peacekeeping

role of 1 yes it can kind of ping the loop back of raw to 1.

Yes it can and to confirm that show IP interface brief there's the loop back of right 1 and the piece

he can ping the loop back over to 1 one can the right it ping the P.C. yes it can.

So we've successfully configured DHEA p on road 1 and tested that the P.C. he gets an IP address via

DCP and that the he can ping the loop back of right a 1 that was a very basic DHEA P lab in the next

labs it gets more complicated.