All language subtitles for 6. 10_3- Storm Control

In the section we're going to talk about storm CON-TROLL

Cisco catalyst sewage pro-ID feature Turnstone control which allows an administrator to suppress access.

Eman unicast multicast or broadcast traffic on Layer 2 interfaces.

This can be handy to protect against broadcast times resulting from dispatching tree misconfiguration

or even unicast storms created by malfunction of host network interface cards on each interface.

A maximum threshold can be configured in bits or packets per second or as a percentage of enterprise

bandwidth if incoming traffic of the specified type xes is threshold during a polling interval.

Traffic is blocked until the incoming grade drops below the conferee you're falling in the road.

Here is how we can configure the tone control.

The first wynot to get interface more by using the interface interface name them in the interface mode.

We need to define some control broadcast multicast or unit cost.

And we need to define the level we can use a bit per second or pick a per second level or we can use

the percentage as well if the threshold value is set to zero.

All traffic will be blocked.

If the threshold volleyers set to 100 no blocking will be done.

So control is close by default.

Please pay attention there.

You need to activate it separately if you want to activate by default.

It's not open and this zone control can be opened in it or channel interfaces.

However the configuration must be implemented only on the logical poor channel interface not on physical

interfaces.

And 12:5 some comfort control configuration.

You can use the show's tone control and show some control mount games or broadcast commands as well.