Original subtitles

In this practical session we'll check to see which port configuration.

Together we have two suites again in here.

Our suites are Madrid and Miami and we have six steps to accomplish.

This is gonna be a real fantastic session nice and we're gonna learn lots of things.

We'll make a great configuration together and let's go with the first step.

The first step is saying as to configure ports between fast internet at 0 0 2 fast attack 0 24 as access

port Alright let's do it

what I need to do is first I need to set the hostname

This is my order it and what questions saying in the first step

is configuring the ports between festival 0 0 2 FaceTime and 0 24 as access ports Okay let's go interface

first Internet 0 0 0 0.

I'm well it show IP interface brief

okay this guy's starting from first tried 0 1 as you see then I'm gonna make the configuration starting

from first 0 1 2 first turn at 0 24

config mode interface first Internet 0 1

switchboard mod access

where in interface mode and when you are gonna configure another interface you don't need to do this

you can do but you don't need to do if you're in interface mode you can go to another interface by typing

interface first Internet 0 2 the same comment OK you could do by typing exit and this command again

but you don't really need to OK well I'm going to do is switchboard more access

to define and access port I'm using the switch port mode access more access command as you will remember

from our sessions

then on it to go to the interface faster to net zero two and switch port mode access

and add it to go to the first zero for our coming guy are you kidding me am I gonna configure the whole

thing step by step one by one are killing us actually no you don't need to do this if you want to configure

a range we have a great command

as you can see that interface range command if you want to configure a range we have interface range

command to make a configuration between an interface range so you don't need to configure one by one

the fall of the 24 ports and what we're gonna do is we are gonna select the range right now and make

the configuration to the whole range and our configuration will affect the whole range that's a great

feature in the phase range fast internet I'm starting from zero one right and I'll go until 24.

And please pay attention that how I'm defining here.

That's important.

I need to put a space and dash and one more space pretty cool huh.

And tune in for

and there as you can see that I'm in the cool freak if range mode instead of the coffee if not this

not means that you're in the range you choose their range and your configuration will affect all the

port in this range.

So what I need to type is switch port more access and enter.

That's it.

You don't need to configure the whole thing.

You don't need to configure one by one.

What you need to do is just to configure a range outright configure ports between this is one to 24

as access will accomplish the vertical.

Let's get into the second step configure the 0 1 ports as trunk strong but first I had to wear five

my last configuration what I'm going to do is

type the show running conflict command and check 01 switch port mode access protocol to access 3 Access

access access X and X and Access access access access and access political.

You can see that range is working now I need to go to the geek ops interface gate 0 1

and switch port

trunk

no switch port mode trunk

why I type this first

in some of the Ayaz devices you need to choose the encapsulation type first and you need to type switch

port trunk encapsulation that line you first.

But in some other areas you don't need this.

That's why I type this but I wish I saw that we don't need this so what we're going to do for trunk

configuration is just to type switch port more trunk on Medicaid and we need to do the same configuration

in Miami to

hostname First Boston and Miami

I'm not going to Oh okay I'm going to do in the face range 0 to 24 and switch port mode says and exit

interface click 0 1 and switch port not truck

pretty cool.

Political pretty cool and pretty easy.

Second Step.

Accomplished as you can see that there is nothing to scare about this comments are pretty straightforward.

But what I'm offering you to do is make this lab or your own pick a choice of please and implement the

commands yourself to one more time

OK.

Now let's go to the Turks that create will Hans groups I'm sorry create villains 3 4 and 5 and their

names will be phone with and wireless O K.

Yes I'm in the configuration mode right now and I should be in the configuration mode to define me with

less okay.

Do you remember that.

How we define the lands I'm gonna show you that within

three

wire type three because questions saying that to create villain three 4 and 5

and the command is real n space villain nay.

This time my villain villain No I'm sorry villain space villain no will and 3 and name of the villain

will be let's check it out will and 3 will be for funky name for

OK real long for this time

4 will be really your name.

Video

and I need to define a villain.

5 which then will be

wireless pretty straightforward as you can see that it's where we're easy to define real ends on the

slates okay.

I defined my will learns but I need to verify it to where fight this I need to issue the show real and

correct show will then

okay.

We have we learned 3 4 and 5 and their names are phone video and wireless

but please pay attention that there are no ports assigned to these villains.

Right now all ports are in the default villain which is v wound right now

OK I created the villains too and I accomplished this that and I am in for now a infested tonight 0

3 2 villain 3 0 4 2 v long 4 and 0 5 2 villain 5.

Now I'm going to assign the puts as you can see the 3 4 and 5 first tune at 3 4 and 5 are in the William

1 which is the default villain right now what I'm gonna do is I'll take these and assigned to the formula

on I'm going to take these and assigned to the video and I'm going to take these and I'll assign this

port to the wireless whaler.

Alright let's go call four year term.

No

if you want to make a change for an interface you need to go to the interface mode interface first Internet

0 3 if I want to assign a port to a v lan my comment is switch poor access Milan and we'll end no

I'm in the first line at 0 3 and questions saves me that assign these two we land 3

so each port access will entry and that's it let's go to the

0 4 this is gonna be so which port access we plan for

and 5 will be we land 5

okay pretty cool and I need to take a look to the show will and I get it to where find my congregation

show will earn

oh right that's well I completely want to see as you can see that pastor at 0 3 is in Milan 3 0 4 in

4 and 0 5 in Milan 5.

Here is the good news

for step is okay right now to alright in the fifth step let's say is that shut down

these parts so I need to shut down first out 0 6 7 8 9 10 and 11

I'm going into the configuration once again

interface branch surely range fast internet 0 6 to allow 1

and not down

alright.

Great as you can see that my ports changed their state to administratively down which I configured.

And as you can see that I use the range.

Comment again.

To accomplish this goal pretty cool and in the next step

commentary you put security on fast internet zero 12th and port will let only five mac addresses if

a relational tours port will shut down

okay.

Let me make some explanation first.

In it's

first zero 12th port let's say that we have a hub that was

in the hub to us.

We have five pieces connected

and somebody is coming and he's trying to plug his cable as the sixth MAC address.

What I'm gonna do is if this guy comes here

I will shut down the first net zero twelve completely

okay.

Let's go

interface first Internet zero first

please remember that if I want to configure the port security the first step is configuring port.

First step is enabling the port security globally under the in the face more first switch port port

security and enter

then I need to define the maximum make addresses that I'm going to accept from that port with sewage

port Port Security

all was going right here maximum command so each port Port Security

maximum

and what question wants me from as a less than is shut down the port.

If the sixth guy comes in switch port port security and

I need to define my violation which is gonna be shut down for this example.

Violation and as you got to him as you were gonna remember we have

three violation modes

we have project restrict and shut down and for this example I'm going to use the shut down

okay.

I am in my configuration and fast Internet zero twelve will accept just five pieces and if a six P.C.

tries to come via hop to our port the port will shutdown itself and yes we finished our configuration

lab tanks were wearing.

That was a real really cool session and see you on the next session.