Original subtitles

In our next section we're going to talk about oil spill version 3 IP 6 configuration.

We have a practical lap for days and we have four steps to accomplish in the first step.

We need to configure rather interfaces with the IP vs 6 addresses in the second minute to configure

a single area or SPF B3.

Then we need to check the active adjacency and the routing table as well.

All right.

We're rather one two and 3.

The first step is saying us to do call for hearing these IP version 6 addresses on the related in their

faces.

All right let's go.

I'm opening my packet tracer and I'm starting with

rather to configure the interface what I need to do is I will go to the interface level and I'm going

to try to configure it okay.

Now I enable I'm enabled more now and in quantity.

But please keep in mind that when you gonna make IP version 6 configuration IP version 6 running configuration

the first thing you should also do is enabling the IP version 6 on the related rather by typing IP with

six unique cast routing command.

All right I'm doing this for each rather first ip with six unique cast routing and

IP with six unique strong.

All right I'm going back to do either one again so it's time to call for you or the IP address is right

now.

I'm going to dig Zero Zero of Terror but rather one in their first gig zero zero and my IP address will

be.

Let's take a look what's going to be.

It's a little hard to memorize this but we are gonna give it a try

2001 a coffee and CBD one for that.

Okay.

All right.

I know rather one and I'm configure an IP 86 address with IP these six command IP with six other address

true towers and then one deviate cover one con column one slice 64 and that's Z cool.

And I'm going to the gig 0 1 and my IP version 6 address is deviate CBD I CBT one quorum call on one

I get.

OK let's go to the rather two it's gonna be that two and that one for the other side this is a b c d

and this is gonna be cafe

I'm in rather two and interface geeks 0 0 IP version 6 address 2001 TB eight cafe one column column

two.

This time it was sliced for an Keke 01 Little B

ABC one column Column One I think

maybe a b c d one yes that should be like this.

Let's check it again.

Debate ABC one column coma.

OK time to look to the rather tree CBT one column Column 2 and ABC the one column Column 2 OK

I'm going to the interface gig 0 0 first and IP 6 address 2001 TV 8 ABC the

one clone column to slash 64.

And guys I had no shots that I need to do for each interface.

And I'm doing it right now.

I'm starting with here and I need to go up to gig 0 1 and my IP address will be this time CB EDI

1 column to 2 and No shit.

Okay let's do the no shut on the here and

for this rather 2

no shot and well everywhere is green right now.

And

I've finished the first step

pretty cool.

Now it's time to call for unity or spear fusion.

3 I think to confirm your ISP version 3 on 3 or others.

The first thing I need to do is defining the rather idea.

Then I'm going to attach the interface to the oil spill process okay.

I'm in the rather one now first for rather run what I need to do is

IP version 6 rather or SPF and my process idea will be 10 for this time or SPF we 3 process 10 could

not pick a rather right.

Please configure manually.

Okay I got this warning.

Because as you will remember from our sessions what I told you that but I am defining with the under

rather less peer process on IP vs 6 is just the wrong right.

We just defined the route right here and we are doing nothing is already rather i.e. 1 1 1 1 let's define

the other eye these forced on each other's eye period six raw turf or SPF 10 and my rod right is

and

IP with six rather or SPF 10 and my you're out right is this 1 3 3 3 2 4 3 and okay I defined the rather

ideas first for each other.

What I'm going to do is now I will go to for my interfaces and I'll define IP version 6 for that interfaces.

That's the difference between IP for configuration and IP 6 in IP for your doing everything in the rather

all SPF mode but in IP physics you are just assigning your rather I.D. in rather SPF I.D. process and

the rest thing is being done under the interface mode.

All right I'm going to the intake 0 0 first an IP 6 or SPF 10.

0 is my comment.

My comment is IP version 6 or SPF.

My process society that I define and the area that I want to define and I'm doing the same thing for

my other interface to

OK.

Let's go to rather to interface geek 01 and IP 6 or SPF 10 arrays zero and same thing will be made for

this one.

Good animal let's go to the rather tree

gig 0 0 IP version 6 or SPF 10 are zero and gig 0 1 will be the say

all right.

I've finished my configuration calling for your single areas before version 3 with between Rather's

who I did it but I don't know if I correctly did it or not.

But I'm gonna check okay in the third step is saying me that check the oil spill and decency I have

a command for this.

And check the rubbing table and I have also a comment for this one.

First I'm going to check the adjacency for rather three show IP version 6 or SPF neighbor is my comment

4 rather 3.

I need to see two neighbors and they should be rather one and rather two and yes as you can see that

I have two neighbors and they are rather one and rather two and the second step is show IP receipts

out command and yes also I have SPF routs on my writing table which is 0 and I'm still unlearning some

prefixes from the voice P.F. routers.