Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:00,300 --> 00:00:01,320
Hello everybody.
2
00:00:01,320 --> 00:00:10,550
It's the last time in this practical session we're down take a look to the ether general configuration
3
00:00:10,640 --> 00:00:13,750
together in the first step.
4
00:00:13,760 --> 00:00:17,520
We need to configure eater general for the food you're a beaut.
5
00:00:17,570 --> 00:00:24,400
As you can see that we have two suites connected to each other from their faces there at 0 1 and faster
6
00:00:24,410 --> 00:00:37,250
and 0 to pause and the lapses that you channel group more passive for switch to and choose a proper
7
00:00:37,260 --> 00:00:40,940
one for switch one.
8
00:00:40,970 --> 00:00:51,730
And second we need to use either channel show to channel summary command and check the output all right.
9
00:00:51,730 --> 00:00:53,620
That's pretty cool.
10
00:00:53,620 --> 00:00:58,780
And let's go in check the output lost
11
00:01:01,930 --> 00:01:08,520
as you can see that we have to switch and they're connected together from fast internet 01 and festival
12
00:01:08,560 --> 00:01:13,020
0 to parts.
13
00:01:13,170 --> 00:01:15,060
I'm in the CLIA right now.
14
00:01:16,580 --> 00:01:30,920
What they need to be is I'm getting into the configuration mode and I'm using interface range w Internet
15
00:01:31,000 --> 00:01:46,270
0 1 2 2 this command means that while there were I'm going to use in this if range will effect both
16
00:01:47,110 --> 00:01:53,220
the ports in the range in this example they're faster and through one in two.
17
00:01:53,270 --> 00:01:55,990
All right I'm in the range right now and
18
00:02:00,690 --> 00:02:06,510
please keep in mind first I'm making our port more to throng
19
00:02:10,150 --> 00:02:21,670
and second I need to define my channel group number and the channel mode I'm defining channel group.
20
00:02:21,960 --> 00:02:23,500
So I'm working.
21
00:02:23,630 --> 00:02:30,630
I'm working ok channel group and I'm going to attach a channel number.
22
00:02:31,060 --> 00:02:44,950
It's gonna be one this time and my most will be something suitable that we are going to configure for
23
00:02:45,280 --> 00:02:54,520
switch to please pay attention that in the lab it's saying that use channel the mode passive for switch
24
00:02:54,520 --> 00:03:04,210
to and choose a proper one for the switch one please remember that if I'm using passive on one side
25
00:03:05,720 --> 00:03:11,910
I need to use active on the other side to perform an entire channel.
26
00:03:12,260 --> 00:03:15,530
So I'm going to call for this guy as
27
00:03:18,780 --> 00:03:21,970
active.
28
00:03:22,050 --> 00:03:27,310
All right let's go to this switch to now
29
00:03:31,140 --> 00:03:32,670
I'm in switch to now
30
00:03:38,440 --> 00:03:49,160
alright I'm in the switch config mode and what I'm going to do is I'm gonna type interface range fast
31
00:03:49,160 --> 00:04:03,990
internet 0 1 to 2 and I will make both these port in run mode and the last thing I'm going to define
32
00:04:04,040 --> 00:04:15,790
my channel group No that's going to be the same with the other side and I'm going to define my channel
33
00:04:15,790 --> 00:04:24,580
mode to passive.
34
00:04:24,610 --> 00:04:27,380
All right all right
35
00:04:31,730 --> 00:04:39,710
we completed our first step and it's time to take a look to the second step right now in the second
36
00:04:39,710 --> 00:04:40,240
step.
37
00:04:40,250 --> 00:04:46,610
We need to use show either channel summary command and check the output.
38
00:04:46,940 --> 00:04:50,460
All right let's verify our configuration.
39
00:04:50,690 --> 00:04:57,720
Now using the show we do general summary command and switch to
40
00:05:00,390 --> 00:05:03,520
show it to channel.
41
00:05:03,840 --> 00:05:09,840
Summary I hit the end there now.
42
00:05:09,910 --> 00:05:10,460
All right.
43
00:05:11,150 --> 00:05:14,420
What is output saves me that
44
00:05:17,200 --> 00:05:18,600
is image 2.
45
00:05:18,700 --> 00:05:37,140
We have two ports first third 0 1 are in P mode which P means there in Port channel cool.
46
00:05:37,140 --> 00:05:40,470
That's what I want to configure already.
47
00:05:40,470 --> 00:05:45,010
That means it's okay in the protocol field.
48
00:05:45,030 --> 00:05:51,480
I can see that we are using L.A. C.P. Yeah.
49
00:05:51,670 --> 00:05:53,640
That's what I want to also.
50
00:05:53,860 --> 00:06:02,150
I'm using active and passive modes and I'm using L.A. C.P. so pretty cool.
51
00:06:02,430 --> 00:06:13,150
I verified the two fields and in here you can see that we are using channel group number one.
52
00:06:13,240 --> 00:06:26,320
All right that's already how I configured my channel that school am in here we have port channel interface
53
00:06:26,470 --> 00:06:36,150
which is pure one and we can see that we have Sue in here.
54
00:06:36,290 --> 00:06:48,310
That's what we want to see on let's take a look to the what Sue means s means layered to which means
55
00:06:48,310 --> 00:06:53,720
that our port channel is operating at layer 2.
56
00:06:53,740 --> 00:07:04,430
Yes that's what I want and you mean our port channel is currently in use is means.
57
00:07:04,460 --> 00:07:08,380
That's okay guys it's working there's a problem.
58
00:07:08,550 --> 00:07:11,000
Whew we are great.
59
00:07:11,000 --> 00:07:16,890
All right guys we completed the second step two and thanks we're wearing.
60
00:07:16,890 --> 00:07:19,100
See you in the next session.
5782
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.