Original subtitles

OK so let's switch to show villain shows us that we only have the default villains so interface gigabit

0 1.

No shut switch mode trunk.

Make it a trunk port and I'll save ETP mode client to make it a client so show VTB status.

It's a client as we can see over here hasn't learned to the V lines yet show v villain.

We still need to learn the remaining villains.

We can see the interface is still orange.

Just gone green now so hopefully it'll learn the villains

while we're waiting let's confirm our configuration.

This port is a trunk port.

It's a good idea to check what you've done on your other switches that are working to confirm that you've

done something similar.

Notice that's all we did on switch one and that's all we need to do on switch to the show veal and brief

show VTB status still hasn't learnt the domain as an example.

So I'll say VTB domain CCMA shouldn't have to do that it should automatically learn that.

But notice now that I've done that a number of existing V'Landys has increased shoe v land brief.

There are the V lands.

So that's something in Packet Tracer you shouldn't have to do that in the real world but with Packet

Tracer you may need to set your VTB domain and set it to a client.

Okay.

So that configuration is being done.

So interface f 0 slash 1 switch port mode access switch port access v lan in this case will be 20.

We need to configure the IP address on the switch which is 10 1 1 2 for the specific switch.

Per the instructions over here no shut.

That is v.i. to now come up IP.

Default gateway will be 10 1 1 2 5 4 which is the Code Switch.

So can we ping the Code Switch you know topology.

Yes we can.

Can we ping switch one yes we can.

Just took a bit longer there but there we go we can ping switch one.

So at this point it looks like switch to is configured show interface if zero slash one switch port

if 0 slash 1 is configured as a access port is operating as an access port it's configured in VLAN 20.

So that looks good so lost switch is switch 3 I'll use different access switches in other labs to get

round this issue with the fonts but hopefully you can kind of see what I'm doing here.

Interface gigabit the 0 1 switch port mode trunk interfaces come up now

show VTB status v lines haven't been learnt yet.

So what I'll do now is wait for this interface to go green and then let's see if packet tracer updates

correctly

okay so the link has gone green show VIP status still a server domain name hasn't been learned.

So what I'll do is make it a client.

Let's see if it's learned that now school stole not learned that so ETP domain CCMA

VIP status now shows us that the villains have been updated show v land brief notice there are the V

lands that we've learnt from the code switch so interface F zero slash one switch port mode access switch

port access v lan 30 so for the real world you need to be careful switches can dynamically learn the

VTB domains and other information from other switches and automatically synchronize their databases

so let's see what we've done we've configured this interface as a access port in violent thirty scrolling

down this interfaces configured as a trunk we now need to configure interface VLAN one with an IP address

of 10 1 1 3 4 the switch slash 24 subnet mosque so cannot ping the code switch yes it can can it ping

switch one yes it can can it ping switch to

yes it can.

One thing I need to do is configure a default gateway which is the core switch so can paying tendered

wonder tend not to fight for the IP address of the course switch in other villains yes it can.

So that looks good I'll save for the config let's confirm that we can on switch t that works.

So everything on switch to looks good

and on switch one can we paying other villains on the course switch.

Yes we can.

So I think our searches are now configured let's configure the pieces and make sure that they can ping

each other so on P.S. 1 we are going to configure the switch with a default gateway of the core switch

I'll set to the DNS server to the code switch as well on the interface.

I'm going to configure it with an IP address of tendered wonder 10 to 10 per hour instructions.

Here the mosque is gonna be 2 4 5 2 4 5 2 4 5 0.

So on the desktop IP config shows us IP address and default gateway can we paying the default gateway.

Yes we can.

Can we ping other IP addresses on the default gateway.

Yes we can.

Can we ping switch one.

Yes we can.

What you'll notice is that traffic goes via the course switch to get to switch one and to switch to

and to switch three.

So.

P.S. One is correctly configured let's configure P.C. to so config default gateway will be tendered

one to twenty two to five four.

I'll do the same for the DNS server ip address share will be tendered one or twenty to twenty slash

24 subnet mask.

That's correct per our instructions.

On the desktop.

Open up a command prompt IP config

IP address looks good.

Default gateway looks good.

Can we paying P.C. 1.

Yes we can.

So that proves that in TV land writing is working and we can ping switch to pieces 3 do something similar

default gateway will be tendered wandered 30 dot too far for Slash 24 subnet mask IP address will be

tendered wandered 30 to the 30 slash 24 subnet mask that's correct per instructions

so open up a command prompt IP config that looks good can we paying P.S. 1 Yes we can.

Can we ping P.C. too.

Yes we can.

Can we ping switch one as an example.

Yes we can switch to switch three.

We have full connectivity between our pieces and switches so the lost device to configure is the server

Gateway here will be tendered one dot one hundred two five four slash 24 mosque IP address will be tendered

one to one hundred one hundred slash 24 mosque

DNS server will be the same IP address so go to command prompt on the server IP config that looks good

can we paying P.S. 1 Yes we can.

P.S. to P.S. 3 so that looks great.

So as one last test can P.S. 1 ping the server.

Yes it can.

Can P.S. to ping the server.

Yes it can can P.S. 3 ping the server.

Yes it can.

So we've successfully configured this network and verified connectivity

we should as an example Save Our device configurations.

So in each switch I'll simply save the config to make sure that it's being done.

Okay so how did you do.

Were you able to configure this network.

Were you able to get everything working out a bit.

Had to be done on this network to get things working.