Would you like to inspect the original subtitles? These are the user uploaded subtitles that are being translated:
1
00:00:06,370 --> 00:00:10,320
This is a practical IP version for submitting lab.
2
00:00:10,420 --> 00:00:17,050
Now this is a practical lab helping you test and verify your knowledge of IP vision for subletting.
3
00:00:17,050 --> 00:00:23,860
We're not simply going to talk about the theory of IP version 4 subletting you need to subnet but in
4
00:00:23,860 --> 00:00:28,080
addition configure the network and get it working.
5
00:00:28,360 --> 00:00:35,020
You need to configure IP addresses on routers on switches and on DHB servers and then you need to configure
6
00:00:35,050 --> 00:00:41,300
the DHB servers to allocate IP addresses to the clients in the correct subnet.
7
00:00:41,320 --> 00:00:48,880
So once again this is a practical demonstration and lab of IP version for submitting in this packet
8
00:00:48,880 --> 00:00:49,770
to trace a lab.
9
00:00:49,780 --> 00:00:57,370
We have multiple sites side 1 and side two connected via serial links to an Internet writer.
10
00:00:57,490 --> 00:01:05,650
You need to configure the network as follows you've been allocated subnet 1 9 2 1 6 8 1 0 slash 24 and
11
00:01:05,650 --> 00:01:12,430
you need to subnet this network into 4 subnets as follows subnet 1 needs to be allocated to site to
12
00:01:12,430 --> 00:01:22,360
1 subnet 2 to the serial link between right of 1 and the Internet broader subnet 3 2 site 2 and subnet
13
00:01:22,360 --> 00:01:27,470
4 to the link between Rider 2 and the Internet rather.
14
00:01:27,640 --> 00:01:34,930
Now we are not going to initially optimize the sub netting you're only going to create 4 subnets and
15
00:01:34,930 --> 00:01:42,460
then split them across these four networks in a subsequent video we'll optimize the serial links to
16
00:01:42,460 --> 00:01:48,350
use a slash 30 mosque and then make more subnets available for additional sites.
17
00:01:48,430 --> 00:01:52,690
But in this initial topology you simply need to create 4 subnets.
18
00:01:52,900 --> 00:01:56,410
You should configure the route as per the instructions in the diagram.
19
00:01:56,410 --> 00:02:02,660
In other words this interface on broader one should use of the Lost IP address in the relevant subnet.
20
00:02:02,680 --> 00:02:08,260
This interface should use the first ip address in the subnet on the serial link.
21
00:02:08,260 --> 00:02:14,770
The Internet right is going to use the lost IP address in both subnets on the serial links and router
22
00:02:14,770 --> 00:02:22,300
2 will once again use the lost IP address in the subnet on the Ethan end interface and to the first
23
00:02:22,330 --> 00:02:25,210
ip address on the serial interface.
24
00:02:25,210 --> 00:02:31,570
You need to configure the switches with the second to last IP address and the subnet and the DHB servers
25
00:02:31,570 --> 00:02:40,990
with the third lost IP address in the subnet so as an example at Site 1 The Switch such one should be
26
00:02:40,990 --> 00:02:47,650
configured with the second lost IP address and the subnet and the DHB server with the third lost IP
27
00:02:47,650 --> 00:02:48,590
address.
28
00:02:48,730 --> 00:02:55,630
The same should be done for switch to incite to and the third lost IP address should be configured on
29
00:02:55,630 --> 00:02:59,280
the DHB server at the site to.
30
00:02:59,320 --> 00:03:06,550
You also need to configure the DHB servers to allocate IP addresses to the clients in the relevant subnets.
31
00:03:06,550 --> 00:03:11,850
So as an example DHB server 1 should allocate IP addresses to PCI 0.
32
00:03:12,010 --> 00:03:20,620
P.S. 1 and P.S. 2 in the subnet allocated to this network DCP server 2 should allocate IP addresses
33
00:03:20,950 --> 00:03:24,680
in the correct subnet to PCI 3 4 and 5.
34
00:03:24,700 --> 00:03:31,270
Once you've done your configuration verify that pieces can access Cisco dot com and Facebook dot com
35
00:03:31,330 --> 00:03:33,100
using their browsers.
36
00:03:33,100 --> 00:03:38,380
The server today to day to day date is configured as a DNS server.
37
00:03:39,130 --> 00:03:46,330
So think of this as the Google DNS server that is configured with a records for Cisco dot com and Facebook
38
00:03:46,330 --> 00:03:47,430
dot com.
39
00:03:47,440 --> 00:03:54,040
So once you've got your network configured with the correct IP addresses your DHB servers are allocating
40
00:03:54,280 --> 00:04:01,070
IP addresses to the clients the clients should be able to access Cisco dot com and Facebook dot com.
41
00:04:01,120 --> 00:04:05,320
Again this is the DNS server in the network.
42
00:04:05,530 --> 00:04:08,050
OK so can you complete the slab.
43
00:04:08,090 --> 00:04:14,550
Can you work out the relevant subnets the relevant IP addresses and configure the routers switches and
44
00:04:14,550 --> 00:04:18,410
DHB servers to get this network working.
45
00:04:18,410 --> 00:04:23,230
Download the packet trace a file and see if you can complete to the lab yourself.
46
00:04:23,270 --> 00:04:27,050
Otherwise watch the next video where I complete the lab.
5279
Can't find what you're looking for?
Get subtitles in any language from opensubtitles.com, and translate them here.