Original subtitles

if you want to place an ornament or a

sculpture on a curved surface the method

is quite easy see in the last video we

did use the bend modifier to fix the

array of this classic element on the

curved corner but here with this shape

we can go with deforming and shrink

wrapping so select the object make sure

the origin in it is set to Geometry hit

shift s and move the cursor to selected

then we can add a lattice object for the

deformation part the lattice needs to be

flat so make the V value on one then

scale it around the mesh to cover it

from all sides and increase the

resolution in it beside the V to

something enough depending on the shape

you have we can go with 50 for the U and

15 for the W in the resolution and it

should be enough now to connect the

ornament to the lattice grid we made we

need a lattice modifier added to the

ornament then we can select the lattice

grid inside it this way you link it

together so editing the grid will affect

the shape once you're done select both

by holding shift and parent them with

contrl P this way moving the grid will

move the

shape what left is selecting the lattice

grid place it near the model you want

the ornament to be placed on then add to

it a shrink wrap modifier and choose the

model as a

Target you can see that it project the

lattice grid GD on the model thus the

ornament will be the same since they are

linked with the lattice modifier but the

top and bottom is deformed too since

it's too big for the area so either fix

the scale or split the shrink wrap area

from the model by selecting it in the

model and hitting P to separate then

choose the new sub model as a Target and

that's it remember to like and sub if

you're still here and see you next time

stay Sharp

goodbye