Original subtitles

All right, guys, thank you so much for attending this call. I really do

appreciate it. You know, the number one reason why I wanted to do this call was

to just acknowledge that, you know, this is an amazing team, amazing product

that's coming out here. We've had a lot of people that have had some really good

success, but I also want to just acknowledge that, you know, with

anything new, there are some learning curves with it and some struggles that

can come through, and I know that can be frustrating. So it's why I wanted to get

on here and do as much as I could to be able to help out.

you guys to be able to kind of adjust things if need be.

I'm going to go over this history real quick and the introduction, so basically

why we're here today.

Guys, remember, I am not a NinjaTrader IT professional, and I don't have the

answers to every question. So as a team, if we can't find a solution combined,

please understand that NinjaTrader probably does have that answer, and

contacting them as a last resort may be the only way to fix certain issues.

Guys, I've had a lot of emails come through with...

certain issues that are coming through with metrics and just trying to load

that a lot of other people aren't having.

The question that I have is, okay, well, why is it for some people but not

others? And that's what we're trying to figure out.

To start off with, I'm going to walk you all through the process of loading the

new EMS onto a blank chart from start to finish and also see if we can place a

trade just to make sure the A-team strategy is working.

If you're ever having issues loading your chart, please follow along with

these steps.

and it'll probably answer some of the questions that you might have already

that we can kind of go through.

Also, after I go over... Sorry, guys.

After we load the strategy, I will then go over the new enhancements, which I'm

extremely excited to show you guys here that I've made to the system.

I'm sure many of you already have some other recommendations to make to this

system to make it better, but please save those recommendations for another

time at this moment because these are the current ones that we're focusing on

that are the main priorities.

After I go through the updates, I will open up the mics for a short Q&A session

where you can ask any questions related to the EMS.

This is the time if you are struggling with anything to ask questions as a

team, and we'll do our best to help out.

During this call, I ask that everyone remain in a professional manner and have

respect for each other.

If you can't be respectful, you will be asked to leave.

At the end of the day, the main reason why I wanted to hold this call was to

show that I truly care about this community and appreciate your feedback

to help make this the greatest EMS system ever created.

So let's get started with everything here.

First off, let's go ahead and go to our charts. I want to show you guys my

screen here, and I'm going to go ahead and load.

Let's go over to NinjaTrader and have this on as a new chart. I'm going to go

over this in a second here, so don't worry too much. But let's go down to the

bottom, and I'm going to go ahead and if we're going to the blank screen.

Now, real quickly, before we go to this, I do want to make sure that on your

control panel that you do have everything connected to live market

data.

Now for myself, I just use my take profit accounts to have live market

data. If you don't have take profit accounts, then you can link it through a

personal account as well.

But I'm going to go ahead and pipe in here, M&Q.

We're going to go and open up a blank chart here.

I do like to have this as set at 6416 just as my initial.

So I'm going to go ahead and do 64 and 16.

And let's go ahead and populate this. I'm just going to do one day so this

loads a bit quicker.

Something that you guys may want to do is on your days, if you want this to run

a little bit faster, Go ahead and click this to one day instead of five so it

doesn't populate too much on your chart.

Go ahead and keep that on. Let's go and do okay, and let's get this screen

loaded here.

Good. Actually, much faster than I thought it was going to be with doing a

Zoom call with all you guys.

First thing I do on the new chart, no matter what comes up, this might not

look like yours at all. It does not matter.

Right mouse click on your chart anywhere, and then that's where you're

going to want to go down, and you're going to want to load.

Trust me, you don't have all these.

The one that says MACD 100 EMA.

Now, if you guys don't have this template, you can actually access this

in Gumroad.

This is through the WaveRunner purchase that you originally did that is separate

from the EMS system.

This template is in there, and all you have to do is go to your NinjaTrader

folder and paste this.

So, real quickly, I'll show you guys how to do that.

If we end up pulling up our documents over here, and you go to the documents

field, locate NinjaTrader 8, and when you click on that, This is in the

install video too, just so you guys know. You can then go down to templates.

You can then go to chart.

And then you can paste that template in this area.

Whatever's pasted in here right afterwards when you exit out of this

screen will automatically be in your templates folder on the bottom here so

you can access it.

So I'm just going to choose the one that says MACD 100.

This is the exact template that I use on YouTube every day when I'm doing videos.

So that is how we are loading that to start.

To get going, let's go ahead and load the indicator first.

Again, I'm going to address some questions about this as well.

When you type into the top, you'll be able to find this by just typing in SMM.

And if downloaded correctly, it'll come up as SMM Indicator V2. When you double

-click that, let's go ahead and add it to our charts.

It'll then come up on the bottom over here, and then you can enable whatever

features that you want to have on here.

Just for the intent of this purpose in this video, I'm just going to do okay.

Just so you guys can see this. Actually, one second. I got to go back and do,

actually turn this on here.

Let's go to the bottom.

And I'm going to put show labels. I want to go and make sure I have the labels

turned on.

All right.

Again, remember, we haven't done anything with the strategy yet.

This is just for the indicator to start.

So to do so, that is how you're going to get all the signals currently on this

indicator.

Now I'm going to hold off on the upgrades to the indicator because it's

actually going to answer a lot of questions that you guys have. I just

want to go through the install process of both these at the moment.

So that's how you add the indicator and how you turn it on.

If you ever want to just turn it off, you can just go back. You can either

remove it from down here or you can just turn it off.

In this example, I'm just going to do remove so it's not on the screen. We can

keep this blank and keep it going.

The second part, which is the most important part, is loading the strategy.

After you have gone to your control panel and you load it as a NinjaScript

add-on, the second button over here to the right is going to be where you

actually install this.

And it's going to come up as Strategy SMM with ATMv4.

You're going to want to double-click this button here.

And it'll populate below.

On the settings on the right-hand side, I don't mess with anything up here

except I do want it to show alerts with trades.

All right.

So let's go down here for a second. You can put this on where you show labels,

which can be very important.

As we scroll down, don't mess with any other settings at all, except this one

right here where it shows setup.

One question I'm getting, Justin, on the top of your screen, you don't have the

white lettering and it's really confusing sometimes.

What you guys want to do is go to both the indicator and also the strategy and

wherever it says labels.

You can actually just take that and delete it, and it won't show up on your

screen. I know that can be kind of confusing.

For this purpose, let's go ahead and do... I'm going to put this on as SIM

buttons.

You guys are aware that the original SIM 101 with NinjaTrader has a lot of

issues. I don't know why it does, so I've just created a new one over here.

Looks like I'm going to have to turn on live market data here in a second. I'll

do that in a moment.

And then once you do so, you're just wanting to click on this button, which I

believe... It's not going to show for a moment because I need to have live

market data. So let's go back and do that real quick.

Let's go over to my control panel.

And I'm just going to put on TBT real quick.

So let's go ahead and add that real quick.

I'm going to adjust our screen.

And I'll go back to the strategies tab in a second and show you guys this.

Come on, baby.

Hopefully I didn't mess up the screen over here.

Load, baby, load.

There we go. It's loading up here.

Hey, Justin, up there on the right-hand corner, just hit the F button to make it

full screen.

This one right here?

Yes. That one I did, it's actually still loading right now. Oh, I'm sorry.

It's okay, brother. All good. I think whenever I have Zoom calls on with math

things and more things going, my computer, I still have all the memory

stuff on it. It still lags a little bit. Thank you, brother, though. I appreciate

you, man.

Let me go and do this real quick. Let's go over here and say, let's put this on

SIM buttons, and then I'm going to go back to the strategy here.

So when I do load this, I'm going to go ahead and add it down here again like

this.

Everything I'm going to keep the same. I'm going to put show labels.

And on the bottom, I'm going to then put this over to this one here and click

Enable. You know you've done this right if you click Apply and now your buttons

show up on the right-hand side, right?

To start, I'm just going to undo all this.

So first things first, just to kind of go over this again, when you upload

everything through as a NinjaScript add-on through your control panel, It

will at the end of it. If there's any questions that come through, you want to

click on yes to get through all that. And at the end, if it does actually

bring a prompt up that says, please shut down NinjaTrader and restart, it means

you've actually done everything perfectly fine and really well.

Restart, go back. That's where you can find the indicator and also the

strategies. So right now, this is loaded onto my chart.

All of these buttons and functions can be turned on or turned off.

But I also want to show you guys that, of course, the biggest thing to start

off with is just make sure that whatever account is listed here is also listed on

your strategy.

So just one more time here. I just want to go down and just show you guys that

that account is the same account as this one here. It's just blurred out BASNC

SIM buttons. All right.

One of the bigger questions that I'm getting to is Justin doesn't seem to be

taking trades, and I think one of the reasons why is because our ATM settings.

So let's just go over that real quickly here.

Again, there's going to be adjustments to this that you guys are going to

absolutely love. But in the meantime, let me just address this.

On a 6416 chart, this is going to automatically default to this saying

ATM64.

This will not take any trades if turned on if this next step is not done

correctly. I just want to address that.

Underneath your ATM strategies, you have to have an ATM strategy that is called

ATM64 specifically without any spaces.

So let's just go through this again. Let's say I were to just create a custom

indicator real quick.

Let's say I wanted to have, let's say, 60 down, 20 up.

All right.

I need to make sure that I save this template literally as

ATM64 with no spaces.

I've noticed on a couple images that I've received, there's a space between

this. It will not take trades.

This is one of those things with coding where whatever value you put in is the

value you're going to get out. And if there's a space within this, it will not

take a trade.

So please make sure when you're doing that, just make sure it's ATM64 or

ATM35. And you go ahead and save that template.

If you already have it saved, you want to do new strategy. Of course, you can

just click on the ATM64.

And it says, do you want to replace it? And yes.

What I do want to do here.

is actually potentially go like this and say, let's take off, let's actually

remove this, right?

I'm going to click on every button here just for the heck of it to see if it'll

actually populate something but not actually take a trade, right? So we'll

look at the P&L over here. The reason I'm trying to do this, and you guys, you

see how my screen flickered there for a second in the back?

A lot of times when you don't have that ATM strategy on there and you don't have

it named, this is why you might be getting some errors where you're like,

Justin, I have these buttons on.

I'm sometimes even seeing the signals, but it's not actually taking a trade for

me.

To make this a little bit faster, guys, let's just go over here real quick.

So stay with me here for a second. What I want to do is actually go to a 3510

chart just so we get more opportunities.

to show this kind of more in live actions so again i'm just going to do 35

10. you will notice over here on the right hand side this chart will actually

automatically switch over instead of saying atm 64 it automatically switches

to atm 35 which is great and that's what we want i am also going to remove atm

35 to see if this will actually take some trades or not take some trades

The point that I'm trying to get with this, though, guys, is if you have these

buttons on and you do not specifically have, you guys see that right there?

Do you guys see how that entered and showed a trade, but it didn't actually

enter the trade? Look at these opportunities.

So that's coming through.

It will not take it. Now let's do this. Let's actually create a strategy real

quick, right?

Let's just put this as 6020 again, right?

Let's save this template.

But all I'm going to do is save it as ATM35.

Boom. I'm going to go ahead and save it.

Now, let's take a look.

I'm going to turn these off and turn these back on.

Let's see if this ends up taking any trades at all.

And again, I'm not looking for anything. All I'm looking is that the ATM strategy

that is listed there will execute anything.

And we'll take a look here in a second to see if that was the main issue going

on.

If not, what I might do is I might just actually remove and install the strategy

again, but this should actually go through here in a second.

I just want to wait for something to come up just to show you guys.

And then we'll kind of get on with the presentation here and go over the

enhancements here in a moment. I just want to do this live for you guys to see

what's going on.

But again, make sure that the account is the same as in the strategy.

And then also that you have a strategy name specifically called 1835.

Come on, baby.

We need at least something to pop up here.

Fast price action this morning sometimes.

Good, though.

Watch,

we get one fat, the big downtrend, and it just doesn't populate anything. That

was kind of a... Just kidding.

If this takes a little bit too long, what I'll do is actually just continue

with the presentation, keep this on right in the background so we can kind

of see what happens as well.

So let me go and pull this up real quick. Can I just switch from ATM 35 to

ATM 64 right here and not have to go back into the application?

Can you switch? So this right here, so on this current version, really good

question, Ralph.

On this, since we are on a 3510 chart, the way I designed it specifically for

this one is it's only going to take the ATM35 setting. So whatever is in this

field, this has to be the same or at least have that name populated as one of

the options to take it.

If you were to change this to, let's say, ATM64, it will not execute trades

on this because this right here is saying whatever buttons are clicked on,

it needs to have this name match at least the one that's in here.

To the point of, you know, can we be on ATM64 like this and have an ATM64

setting? You know, that's actually a really good question. To be honest, I

haven't actually worked with that just yet.

But that actually might be something you can do. So if you have, I know some

traders trade a 3510 chart, but they use a 6416 ATM setting, which I found

actually really interesting. That seemed to work.

And that actually might be one way to kind of get it through there.

To answer another question real quick, guys, on doji candles, for some reason,

if you guys aren't getting every doji candle that comes through, either with a

continuation long or short.

There is a code within the strategy specifically designed to show right

here, and it was kind of faint, but it's the percentage of doji for a

continuation. It's blanked out here, but it says 20. All that means is that the

body, which is why I didn't take this one, the body has to be 20% of the

overall length. And I have that there because that's typically like this. You

guys see how that body was much smaller than this one.

You get better entries a lot of times when you get this candle forming instead

of those fatter bodies to go through.

Let me go back here real quick to the email that I have on. Guys, I'll keep

this open in the back. You should be able to see my entire screen.

So you should see if this is firing off in the background here.

All right, so after that, we can actually go over some of the new

enhancements and updates. Guys, this is actually my favorite part of this call

because it's answering a lot of questions that you guys have that I want

to address as well.

We'll get back to this screen, but I want to shoot over here for a second.

And hopefully this didn't get rid of what I had on there, which it might

have. I think it might have. Oh, darn.

Okay, that's all right.

Let's go through this.

The indicator specifically.

We're going to start with the indicator, and then we're also going to go over the

ATM strategy, or excuse me, the strategy, the EMS, which is going to be

the bigger update that we got to know about. But let me just go over the

indicator first because that's a shorter thing.

Guys, the reason I put so much time and energy into this email is because this

is actually the exact verbiage I sent over to my developer to have changed

immediately, which I put my money where my mouth is. I've already paid for this.

The developer is on it, confirmed it yesterday, and he's already working on

these changes. So just know that everything is working in the background.

To start off with on the indicator, I'm going to be removing the continue long

and continue short options.

So when you go up here underneath the indicator, it's going to be removing.

The continue long and continue short, which is going to be these couple

buttons right here.

Now, instead, it's actually replaced with bullish doji and bearish doji.

I understand that one thing with these metrics is the names over here can be

confusing. Now, to Justin, all these make complete sense because guess who

developed it? I did. But guess what everyone else is using? People are not

Justin, and they don't live in my mind. So I need to understand that some of

these buttons can be a little bit confusing, and I want to address that.

So I figured bullish doji, bearish doji.

So when enabled, what I told them, I want the first doji opportunity to be

able to happen.

But I also want there to be an arrow that's placed underneath each one of

them. I just had it on the screen here. But the example is when you have the

bullish doji turned on, every time that you have a green background and have a

green doji with a white dot on top, it's going to populate a little arrow

underneath of it.

Example for a bearish doji is every time you have a red background with a red

dot, it's going to have a red.

uh icon showing below now all of these candles are going to still follow 20

body rule now as i said that let me show you guys exactly what that's going to

actually look like on here anytime let's bring on our drawing tool real quick

let's have some fun with this don't make fun of me i'm going to try to make a

triangle here real quick it's not going to be the prettiest triangle but we're

going to make one i'm going to put this and make this green okay sorry about

this i had this all prepped out the reason i'm going through this It's

because these changes, not only with the indicator, are going to correlate over

to the strategy. So it's not a waste of time. Let me just say it like that.

Let me go ahead and copy and paste a couple of these. What this means is that

every time we end up hitting a background with our 20% doji, it's going

to give us this signal right here telling us that we need to enter in

long. So where's another opportunity like this?

Let's bring this over for a second.

Actually, there you go. You guys see that coming in? You see how this is

executed?

There's a great thing. All buttons are on, right?

ATM strategy is ATM 35.

The first trades come in and it's taking it right away.

That's why I wanted to say that ATM strategy, having that on and being the

exact same name is the reason why a lot of this might, some of you might have

some issues with this.

Let's see this, take this trade. I want to see this win.

You better go up there. Don't you come down.

Come on.

Come on, just do it real quick. I got to get onto this video.

Come on. There we go. Good. Trade one. Good. Done. All right.

Let's move on to the important parts.

Right here.

Let's look at another opportunity.

So right on this area, do you guys notice how these candles right here?

I don't want it to be every single darn one that comes through. It can be, but I

want the higher percentage trades that come in. So this would actually place an

order, or not an order, excuse me, an icon.

Really? You're really doing this to me right now?

You can't just click on the thing?

Really?

Guys, it's going to place it right here. You know what I mean.

And inversely, it's going to place it on this candle right here.

So what I like about that is when you have those buttons turned on, you're

going to get every essential continuation trade, long or short, but

it's just going to be bullish or bearish doji. So much easier to understand, and

it's going to populate every one of those opportunities.

Now it's also going to have the ability, as it has in the email here, to be able

to turn this with an EMA filter on.

So when the EMA filter is turned on, what it means is it's going to get rid

of all of these inverse, and it's only going to populate the bullish ones

coming up. That's going to put a dot or basically an arrow right under here,

under here, and under here.

Right? Another trade just won. I don't know if you guys saw that.

So that is the first thing for the indicator.

Let's keep going through this.

When the filters turn on.

So basically I said when the EMA filters turn on, I only want buys above.

the EMA or shorts below the desired length. When all EMA is turned off, I

want it to take every issue up or every signal up and down.

Last part of the indicator, then we'll move on to the strategy.

This one right here. Guys, I understand and I am 100% aware and this is actually

something that's been fixed more immediately, but I can't release just

yet because it's going to be a bundle in the next upgrade.

When you add this indicator, I know this can be frustrating and I understand.

When you add this right now at the current moment, you add this to your

indicators down here.

What is the thing that happens with every other indicator when you sit down

here and you click okay?

It saves it to this field.

More importantly, guys, when you go through this, you should be able to

right-click, create a template, save this with that indicator loaded on it.

Right now, there was.

an issue where you cannot actually do that, and I understand that's

frustrating. It has already been fixed.

The new update when I have it, as the indicator down here, it permanently

stays on. When you do a template, it fixes it. It's done.

So I just want you guys to know about that because that was one of the main

concerns. I want to address it, and it's been fixed because, guys, when I load

this template for SMM, I just want it to load everything on there with the

indicator if I want it, right?

That's how it should be.

Let's go back here real quick. Let's get into the meaty sauce that everyone wants

to know about.

That's going to make one of the biggest differences.

I see some thumbs up coming through. Thank you, guys.

Now, on the strategy, more importantly, this is where the bread and butter is,

right? This is exactly how we're trading this.

There is going to be some changes on here, and this is... I want to go

through this slow, okay?

I am going to be removing the continue long and the continue short button.

These are now going to be replaced.

With what?

Bullish Doji and Bearish Doji. The exact examples that I just showed with these

triangles so you can get into those opportunities each time.

Now there is a massive strategy behind that that I can potentially go over

later, but I need to at least be able to have an option to choose just those

functions on the chart.

replacing with bullish and doji opportunities.

So this goes over the example.

I told him that I want the bullish doji to be when the green background's on.

You have a green doji candle with a white dot on top. Same for inverse for

bearish, right?

The repeat button.

These buttons, without the repeat feature turned on, should only take one

trade at a time and then go gray with either being closed out with the close

button or hitting your ATM strategy.

Do you guys obviously realize why I have this on that way? I need to be complying

with TPT.

That obviously means anything manually traded is completely fine.

I'm going to tell you something real quick that I just got crazy news on that

I wish I knew a thousand years ago.

Do you guys realize if you place any orders by market or sell market?

And check this out.

Let's go over here. I don't know what the heck's happening on this screen, but

let's actually stop.

I wonder if we can stop this strategy here for a second.

I'm going to do this here.

Let's go and close this out. If you were to do, let's say, buy market, and you

just click this on, if you click close with your cursor, this button right

here, the main one, it's going to shut this down.

You click the little scrolling on your mouse. You click down on that scroll

feature.

You can close that trade.

Oops, let's open another field.

You can close that trade out, and it will not get rid of your ATM strategy or

anything on here, and it will actually remain on your chart.

I thought that was a really cool thing that I learned the other day.

Let me do this real quick just so this is not taking trades all the time and be

annoying for us.

Ooh,

nice one there.

It said the repeat button. So the repeat button is going to be on.

It's going to be as an option that you can have, but just understand that it's

going to be called repeat bull bear doji just to take into account of the new

buttons, bearish doji and bullish doji.

When the EMA filter is turned on, of course, it's going to only take

opportunities above and opportunities below.

Now, the first doji button on the bottom, the one that is

used correctly and also can show different results

if not used in kind of the video that I posted on my number one trading

strategy, where specifically when price action is coming back up to the 100 EMA,

this is where I like to kind of turn that button on for the first doji.

And I like for it to be able to take an opportunity to the downside.

It's not going to take it right now because I don't have the SIM on, but

that is how I like to use that strategy.

I also understand that that can be very confusing, so let me go over this.

This is one of the biggest button feature upgrades that I've done to this.

This button is now going to be called Reversal Doji.

So this button is to only be used once and then turn off after

each use and not have the ability to be clicked on, which is going to be

massive.

The only feature of this button, when turned on, will look at current price

action, and if Renko candles, like this, are closing with white dots on top,

regardless of the color, when you click this on, it's going to take the very

first reversal doji to the downside, and it's going to be a complete game changer

because that's the only function of it now, right?

So the same goes for the opposite.

So right here, guys, how this is going to work.

We are trading like this on our screens.

Right here, you're going to be able to have this off. You can click this on. No

matter what happens to price action, regardless of the color, it's going to

be able to take this candle right here and interest in, and it's going to go to

the long side.

Regardless of what's going on after this trade, boom, click it on.

First candle to the downside. Where is it?

Hasn't happened yet.

It'll take that first candle to the downside.

But it's specifically designed to only take that trade on there.

I see a thumbs up coming through. I'm glad you guys are excited about this.

This button, I also told them, I want completely separate from the other

button so it's not confusing.

What I've also said is I want a physical gap between this button and all these

other ones. Literally put a space so it's not being confused being used with

other buttons and it's just this one on its own.

I will tell you right now, The most powerful button with this entire system

is actually this button right here. That was added literally three hours before I

did the first release.

And I believe this could be one of the biggest potential money makers on here.

Right? You guys see this? This would technically take this candle over here.

Right?

Completely separate.

Also, I told them if we can have a gap between it.

Now, ATM strategies.

Guys, we're almost done with this. So hang with me here. Hopefully you guys

are liking the update so far.

This is a biggie. I literally wrote it out. This is a big one, ATM strategy.

This is what I've sent over.

I would like to remove both the ATM35 and

the ATM64 from this completely.

What are we going to put instead?

Instead, I want to have whatever is physically shown in this box.

be the strategy that is tied to whatever buttons are currently turned on.

The user should be able to create as many strategies as they want and name

them whatever they want, but whatever is displayed in this box is what is

deployed with these buttons.

So let me go with that real quick, and I'll jump to number seven.

I did get a response back from this.

We are looking in right now to see if the API strategy

with NinjaTrader will allow us to literally go like this and say, you know

what? I'm feeling like I want to do this strategy.

Let's implement that. I feel like I want to do this strategy in a second.

The API with this, we are looking to see if it's integrated that we can use with

these buttons. If not, the response my developer sent back is, Justin, don't

worry about it at all.

I'm literally going to create a function within this tool specifically where

traders can upload any strategy they want, and whatever is clicked on is

going to essentially operate just like this.

Why was this created and why is it so powerful?

I understand that we're not always going to be trading MNQ35.

We're not always going to be trading MNQ64.

I want to trade GC.

I want to trade CL.

I want to trade ES.

You know what those other charts have?

Different settings, different ATMs. This is not a one-size-fits-all.

This is a multiple-size-fits-multiple charts.

And that is where I understand that this needs to be whatever's shown in here.

Ideally, guys, I'm going to shoot for it. I'll pay extra. I don't care what I

have to do to invest in this.

I would really like for this to stay as is and whatever is shown in the default

ATM here to go on. If not, just understand that it will be incorporated

with the add-on here, and that's where you can choose your ATM strategy.

Last one here.

I want to be able to trade, and actually...

Did this on the call yesterday. I felt so silly to my developer. I was like, I

should just try this, and it worked.

I got the question sometimes.

I would like to also be able to trade multiple ticker symbols with the option

for each chart to load this strategy with different buttons enabled on each

chart.

So what do I mean by that?

Right now, you guys will notice I'm going to put on these three buttons,

right? We are on chart one.

If I go over right here to chart two, the exact same buttons are on.

There is actually an easy fix that the developer didn't even need to do that I

just wasn't aware of with this system.

If you have a one chart open and multiple screens on the bottom on this

specific chart, everything down here is going to do these buttons.

See how I took that off? Let's go back to the first one. It took it off.

The easy workaround, guys. Open a new chart.

You open a brand new chart window.

and you load the strategy, you can have whatever buttons you want on, and then

on that other separate chart, you can do completely separate buttons.

I did this yesterday where I had M&Q on one chart. I don't even know if it's

even up here. Do I have two charts?

No. I had M&Q open on one, M&Q open on another. I had buy, sell on one, and

then I had buy, sell, continue, continue on the other.

Took trades completely separate.

So if you're trading GC or ES,

You have the ability to actually do that. I know that was one of the bigger

questions. But there is actually a workaround in the meantime that I wasn't

aware of that I just want to show you guys.

All right.

And honestly, at the end of this, you guys, I just want to thank you for

attending this call. I really appreciate everyone.

And just know that, again, I put my money where my mouth is, and I mean it

when I say that. I honestly will do anything that I can to help make this

the greatest EMS system, or at least I'll die trying. And I really do mean

that, you guys, because I have seen and heard within the last – week or so, I

can't tell you how many emails that are coming through saying, Justin, I'm

passing accounts. I'm making a bunch of money. I'm looking at strategies.

I'm working and tweaking the system. This works. This doesn't work. I

actually love hearing those emails, but I also want to address right now in this

video, which I want to transition this into, is a Q&A section.

where we can kind of unmute our mics, and I'll do this in a second.

Please, I want this to be very, very respectful on if anyone is having any

issues currently.

Let me go and stop sharing this real quick so I can get back with you guys.

If anyone is having issues with anything loading on this, any errors that are

coming through, I want you guys to be able to discuss those. And as a team, if

I don't know the answer, I'm sure someone on here might know the answer to

it, right?

So just be aware.

that we're going to be here to help out as much as possible.

So let me open this up real quick. I think and I believe you guys might be

able to unmute your mics here.

Hopefully that was a good explanation of kind of loading things on your chart and

going through.

If you are missing one of those things that are on there, please go back and

take a look at that.

this recording to be able to see what's going on.

But one at a time here, when I have someone speaking, if someone is

speaking, please mute your mic.

I actually have a hand function that you guys can see. I have three hands up

right now.

If your hand is not up, please mute your mic.

And let's respect that because their question might actually be your question

as well.

And I want to make sure to address that.

So one by one here, I'm going to go and start with the first one up here.

Beverly, I do see your hand up.

Go ahead and ask your question here.

Hi, Justin.

Hey, Beverly.

I love it. Love this new strategy. But my question is that I got two

questions, actually.

I came in a little bit late, but I don't know if you addressed it.

With a personal account, the repeat and sell and continuous buttons, are those

off limit as well with a personal account, not prop?

Very good question. Personal accounts do not have any restrictions on automation

or in full automated bots.

So you are 100% okay to use all buttons.

Okay. And my second question is, when I

log off NinjaTrader and I log back in, I always have to add the

strategies again. They won't save automatically.

And sometimes when I use the break-even button, sometimes the strategy

disappears for some reason.

Okay.

Just to answer this really quickly, the indicator to start with, I am aware that

if you add it and try to save it, it isn't going to add.

In the new version, it will add. The strategy specifically, because I

actually load my strategy each time that I go onto my computer.

I talk to NinjaTrader about this to see if there's a way to permanently have it

on there.

If someone else might know the answer to this and is more familiar with

workplaces on NinjaTrader, I don't know if there's a way to actually

specifically do that where you pull up a workplace that has a strategy, but the

information I got back right away from them is just, and unfortunately with

this one right here that you're working with, it is something that you have to

click a couple buttons on to populate on your screen if you were to completely

log out and log back on.

As far as the breakeven buttons, I have actually used our breakeven buttons.

Quite a few times.

I'm addressing that as an issue because I haven't seen it myself.

But if you have, that means that there is something on there.

Please do note that I'm going to take note of that and see if there's

something that we can do to address that.

Thank you very much.

You're welcome, Beverly.

I'm going to go to the next one here. Brandon, go ahead.

Yeah, man. Hey.

Hey, brother. Real quick, and you might have already answered it too. That's

okay, man.

Earlier. But the first doji.

Yeah. You said.

there's a percentage I see by it, like 20%. What does that represent again? Is

that above the body? And if I adjust that, can I adjust that? And if I adjust

it, how will that change when it takes the trade as far as putting it in?

Yeah, let's go over right now. My screen's going to populate here in a

second. What he's referring to, everyone, is just that percentage doji.

So if you go underneath your ATM strategy, this button right here or this

field is preset to 20.

You can actually increase this or decrease this. This is just saying that

the continuous, right, not the first doji, but the continuous trades that are

on here, which will be actually converted in different, if it's 20%,

of the entire body.

So the actual body, if you take the wick to wick in the body, as long as that's

20% or less, it'll take that and it'll be considered a strong candle to meet

the requirements for the continuous.

So if you are someone who wants to increase this, you could, let's just

say, I want 50% of a doji candle to be populated.

It will give you more trades and more alerts, but just understand that, for

example, if you guys can see on my screen.

You see how these are fatter dojis over here, and this one right here is the 20%

one. This still can work and actually will work really well with the new

updates because it's actually going to populate these candles if you want to

increase this.

But, yes, you can play around with this, but I would just try to set with 20 and

kind of be okay with that at least just to start.

Okay, appreciate it.

Yeah, you're welcome, brother.

Let me go ahead and stop sharing that real quick.

Let's go into the next question here.

I'm just going to go down from top to bottom. I know you guys have a lot of

questions here.

Sorry about that. Casey, I see a hand up here. Go ahead.

Hey, Justin.

Hey, Casey.

But Ricky is my name. You probably recognize that name. Oh, Ricky.

Nice. Thanks for being here.

First of all, I just wanted to say, I mean, I've been trading for two years

and, you know, emotion is so much of it.

And just in the 48 hours of using the thing.

Just the first doji alone, it's just been crazy amazing.

My first is a thank you. But my second question is I was wondering, you know,

your community is growing, and like I'm in Ron's room also, and there's so many

smart people and helpful people, but I get it. Ron tries to limit, you know,

who can talk and what they can say. Have you ever thought about maybe once a week

or once every other couple weeks having a session where it's literally just

question asking and because you have some great core members of the group

some people that know ninja really well some people that know strategies really

well about creating something like maybe an hour a week or every other week it's

just a suggestion i thought about and my other question is at some point i would

like to

talk about different ATM strategies, for example, for the first OG.

Like the one, I can't remember her name, she recommended.

I've been using it. It's been great. But I also think there's ways to improve it.

So that's just to be another request in the future is having like a think tank

for what strategy works best with stop loss, take profit, and even some

customization of it just down the road. Anyway, that's all I wanted to say.

Yeah, Ricky, thank you so much for this. Let me address this question here real

quick for everyone.

And I'll try to get through it. And if I miss something, I might have to ask you

again. But about the community and having a call like that, I'm going to

start off by saying, I don't know if Ron's on this call, but like, brother,

you are one of the best live trading people I have ever come across. And the

team that you hold is absolutely brilliant. And I know a lot of people

are having a lot of amazing success with it.

I also do get the question sometimes, Justin.

with the new buttons and the new EMF, it would be kind of nice to have kind of a

little community to be able to have together, kind of like calls like this,

you know, where we kind of all get on together and chat about things, you

know, chat about different strategies.

I do have, as you guys know, my private take profit team each week. I had that

originally as a five TBT account minimum. I've dropped it down to three.

It's an amazing group to be on, but I also understand that some people may not

be able to forward three accounts and might just have one account or other

ones.

I am looking into the...

after this next release is open to try to incorporate more people within a

group like that that are dedicated to getting, let's say, one or more accounts

or whatever of TPT from an eval to pro.

And that's where I think it would be a really good time to go over strategies.

I always say I'm not as strong as myself, but I can be incredible if I

have other people around me that are even smarter than me.

Guys, I want to be the quietest person in the room.

dumbest person and honestly the person making the least amount of money because

it means I have the most to gain in that room.

Seriously, guys, that team and amongst a lot of people here of the 286 people

that are on here, I've seen some names on here already that are actually pro

traders who are doing incredibly well with this system that I know know things

more than I do.

So, Ricky, I'll leave it with this, and I'll go on to a different question. I'm

going to try to keep these brief.

But do know that this has been on my mind. My wife was actually the person

who suggested this to me, saying, Justin, you're having a lot of success

with this.

What if you were to open this up to potentially a day a week where we can

get everyone on here and kind of just as a team look at things together?

I kind of like that idea.

It would be separate from what Ron is doing. I don't want to take away from

what he's doing.

He's crushing it.

But I also understand that there's a group of people who like the EMS and

more kind of focusing just on what I've created here that it could be beneficial

to. So I'm just going to say that. And then, Rick, does that help answer that

question? Did I miss anything?

Yeah, that was awesome. And, again, that first OG, I can't wait to learn more

about it because it's been great.

My gosh, you guys, that button, I'm not kidding. In this new upgrade, when

you're taking that first Doji thing, on a call, I'm not going to say names. If

you're on this call, please say if it was you. On the Wednesday call, I had

people use that button. One person made $1,000. Another person made $1,600.

I'm not just saying that. The video was recorded.

So if you're on here, you can be that person who says it. But it does work

really well.

I've been making $700.

Yeah, thank you. You're making $700. Awesome, brother. Ricky, all right,

brother. I want to go into it.

Another one. Yeah.

Who is this one here? I don't know how to raise my hand or anything on this.

I'm trying to figure it out. But you were saying the

videos I was watching, it was like load the Hyper Scalper

version.

Yeah, the Hyper Scalper. And you were saying to use. Go ahead.

Go ahead. I'm sorry.

I don't know if there's videos on how to load.

I guess I'm a little lost because right now, on Wednesday, I was down like $700.

Yesterday, I was up like $1,500.

And today, I'm down $1,500 because I don't know if the strategies are

different.

I'm getting whipsawed today, like incredible.

Let me just answer the first question real quick. That might make a

difference. And then I'm going to get back to the start hands here real quick.

That might help it as well. The template, guys, do not use the

WaveRunner Hyperscalper on this. The only template that I want you to use and

load first is going to be the one that says MACD 100 EMA that it's in, which

can make a difference on your chart. So please load that one first and then load

the strategy on top of it.

which is specifically how I had the developer make it, which might see some

different things there.

As far as seeing different results throughout the day, what I would do is I

would kind of just pump the brakes on things right now, currently potentially

with this version, until I have the next one out to see the upgrades on it.

I don't want to see things go too wrong for a lot of people. It sounded like you

had a really good day one day, other days not.

We all know market conditions change from day to day out, and nothing is

perfect. But I would rather, to be completely honest with you guys, I would

say hold for a second. Let me do the investment and work on my end here when

the new release is out. Guys, remember, any release I do on this is completely

free. You're already in. You're already grandfathered. I will only just make

this better and better and get the updates. But I would just – I can look

at that in the meantime.

If I can, let's go ahead and go to another question. I raised hand here. I

know there's a lot of them. Guys, I also wanted to respect –

How do we raise our hand?

How does someone raise their hand?

Use the react button.

Up the right-hand corner of the screen, especially if you go on full screen

mode, that's where I'm seeing it.

There's a bunch of stuff up there, and the left-hand icon is the little hand.

Click on it.

Or it's the bottom lower right. It just depends on how your screen's laid out.

Oh, gotcha.

I'll look for the reaction button.

The shortcut is Alt-Y.

Alt-Y? Well, that's a good idea. Alt-Y will toggle back and forth from range

and lower.

Awesome, guys. Thank you for that.

Let's hit another question here. Anita, I see you on here.

Oh, hi, everybody. And hi, Justin.

Yeah,

thank you for putting this together. I'm in the UK.

And for all intents and purposes, I'm a beginner. So I'm sort of holding on to

your angles a little bit following.

But I'm probably just to limit my question to one as I learn this.

I've heard this thing about, you know, VPS auto trading versus manual.

Can you just visually show me on the screen what it looks like if you're

doing this in manual mode?

I don't breach any stuff if I ever get to use a prop firm account or whatever

it is you can use with auto trading.

I'm getting a little bit confused between what is auto and what is manual.

I think that's one of the best questions we've had yet here. Anita, thank you so

much. If you guys can see my screen over here, I'm going to go through it right

now.

Specifically with TPT on the call that I have and a lot of other prop firms,

right now these buttons that say repeat and repeat continuous don't use.

Don't put them on. Okay. I only want you to use these buttons because how this

will work, should work now and obviously in the new one, is this is a single

-button function where if you click this button on and the order is filled, on

the new version it will go gray right afterwards, meaning that you have to

click it back on.

What TPT confirmed with me is that this is essentially us treating it in a

manual mode.

Because what it's saying is, let's say I'm trading price action right here.

Who says I can't set a limit order right here and say when price action gets to

this point, fill me in?

Well, isn't that the same thing of saying take the first continuation short

and fill me in?

They told me that and I was like, game over. This will absolutely work.

So to answer your question really briefly, don't have these two buttons on

here. You can use everything else. If you're trading in a visual account, a

cash account, you can have these on because there's no restrictions.

Oh, okay. Thank you. That's very helpful. And just one minor question.

Is this just for micro accounts?

Because I hear that a lot. Or is it also for, I don't know what the next one up

is. Is it mini or something?

Yes, good question.

A lot of people on here are trading take profit accounts, 50K accounts.

I always suggest starting with minis, which is one-tenth of the contract.

Excuse me, micros, which is one-tenth of the contract size of a mini.

And I like trading with five or ten contracts.

You can absolutely use this on any ticker symbol, and you can use it with

any size.

My mentors trade 21 minis over 72 funded accounts,

and they noticed that they could only fill 21 contracts at a time in a second.

That was kind of funny. But, yes, you can absolutely use this with minis.

as well as micros.

Okay. And my very final question, thank you for bearing with me, is your screen

size, how you're viewing it. In Ninja Trader, they say to use 1024 by 720 or

something like that. But on my laptop, that looks a bit odd and compressed.

What screen size are you using to view?

Oh, that's a good question.

Because it just looks different on yours. It looks just more like

proportionate. Yeah, yeah.

Whereas on my laptop, it looks like somebody squashed it, you know, and put

it in a cupboard.

Oh, no.

We don't want that. We've got to get it out of the cupboard. We don't want that.

Something that I did notice, I'm trying to figure out how to get it on here.

Your actual screen, what NinjaTrader told me is if it's looking squished, the

actual overall, like, resolution and, like, you know how some people on their

screen will have it set to, like, 100 or 90 or 80?

They were saying that can actually affect how NinjaTrader gets displayed.

I'm trying to figure out how, I thought there was a button down here where you

can literally go on and see what size you're actually populating everything.

Okay. No worries. It is a minor question compared to the others.

I'm just going to take it bit by bit and see if I can work out a way to build up

for the prop account, the paid profit thing in time. Thank you very much.

Brilliant. You're welcome. You're welcome, Anita.

Justin, are you going to send this out as a video for all of us? Oh, dude,

totally. You guys are all getting this recording.

I'm going to put it on YouTube as an unlisted link.

Let me just say this real quick here.

We may have an issue with our email after this video because there is so

many emails I came in and sent out.

There's a max that I can really send in one day, and that's 500 emails, and I'm

trying to look at other servers.

For some reason, if I or Greg don't get back to you, I'm going to record this

video, save it to YouTube as unlisted. It's not going to be public.

If any of you don't get this video right away afterwards, know that that link

will be sent to you directly, and this whole recording will come to you.

What is the email?

Oh, it's going to come through from Simple Market Metrics.

I'll just send it as the same one as the Zoom link this morning. Or if you guys

have questions to Simple Market Metrics at Gmail, that will hit Greg, and then

it will hit myself as well.

So if for some reason you don't get this link, just know that it's probably going

to take hours to process this darn thing. I'll get it on YouTube, and then

I'll send it out.

Dale, you're welcome, brother. You're not going to have to go through this

whole video and check it all out from the beginning because you go too fast,

you know.

I know. I also want to respect time, too, so I'm trying to answer these

questions quickly. That's fine.

Del, I see your hand up here, brother. Let's go and answer your question.

Good morning, everyone.

Thank you for providing us better tools. I will have to see that.

So my question is, I would like to have a favor. Would it be possible, in a

couple of minutes, I can share my screen a minute after everything?

It's completely different.

So I'd like to do the best to install that. I cannot sort of sense.

Sunday I bought it. I cannot install it now.

Okay, Del, let's do this real quick. Let's get through a few more hand-up

questions because I think you might have the same question as other ones for the

install. And I was actually going to recommend that if someone is currently

having an install issue, if we can show a screen and kind of work through

together. Do know that I will get back to this, and let's have you actually

share your screen in a little bit here.

Guys, I'm also going to kind of have to put a time cap on this. I'm going to say

we're going to go for potentially max of another hour on this call, but I want to

answer a few more startup hands here and then get into the question like that.

Hey, Justin.

Yeah.

Hey, Stefan.

Your old email buddy.

Yes, man.

As always, you've done a fantastic job on it.

Thank you, man. It's absolutely marvelous, you know.

I think I gave you some ideas, but I think you hit it out of the park, as

always.

Thank you. To the problem that you mentioned earlier on the system, I

noticed exactly as what you had before.

When you load the indicator, sometimes it just disappears. You have to reload

it. But I think you're fixing that in the new version.

And on the ATM trade, I managed to just use

any type of ATM, either on a 64 running on a 35

chart. So it did work for me, but it may be different for someone else.

isolated incidences or something, you know, because I tried every possible

system to see how it reacts, you know. And I noticed this, I was on the Asian

market and I set my screen to the 3510, but my

ATM was still on the 64 and it just took the trade.

So I'm like, great, it works.

Okay. Just to clarify what you're saying here, you were on a 3510.

Did you have the ATM64 populated in the field right above the button?

Yeah. Perfect. So that's good to know. So it will take an ATM64 on a

3510 as long as it's on there.

Let me rephrase this. At least it worked for me. It may not work for everyone,

but it definitely worked for me.

But I think the way you're doing it with changing it with different

ATMs is definitely the way to go.

You hate to go in and change your settings and re-save it and change your

settings and re-save it.

It'd be nice to just say whatever you have on those settings, just choose one

of them, and then it implements it.

Okay, awesome, brother. Thank you for that.

Exactly. And I think one of the requests that I'm hearing is because not everyone

can be on the calls at the same time, you know, because some of us are now in

different countries, as you know.

Now I moved from the US to Germany.

But if we can have like your competitions that you're hosting, you

know, we definitely see great success.

If we maybe can,

have a different channel for members where at least we have some recordings

of it, where the top two can share their success so we can learn from that, you

know, because I think that's definitely one of the most valuable parts, you

know, to see what are they doing different, you know, especially the top

two, you know. Okay. Totally.

Perfect.

I will give it to more thought. I will actually open up that conversation to my

current.

private team that I hold to see how we could potentially adjust that, maybe

even lowering the requirement of TPT accounts since I really want to focus on

people that are dedicated specifically for using them for those calls to allow

for more.

Just know that I have that noted, and I will address that with the team.

Let's go to another one here real quick, kind of move on here.

Barry, I see your hand up.

Hey, Justin. I had a quick question.

Hey, Barry. Yeah, man. You said to close out without breaking the strategy.

Yes, sir. You're in a trade. Can you tell me that again because I'm not real

sure. I'll show you my mouse real quick now that I can see my screen.

Guys, on your mouse, this little scrolly-rolly button here, you can

actually click that down, right?

So let me share my screen.

If you just hover, I don't know why I didn't know this like 15 years ago. I

don't know who sent me an email on this. If you're on this call, say something

because I want to give you the biggest pat on the back. You literally just

hover over the close button, right? I'm not clicking anything yet.

Use it.

cover over it click this middle button just click it down it'll close that

manual order and it'll keep the entire system on and it won't take it off so

right now if you do a mouth click it'll take it off again that is specifically i

did check with my coder and ninja trader if you do click this close button it

will undo this strategy but one guy's like hey just click the middle of your

your button and it won't actually close it i've been using it ever since guys

And it works brilliant. So just that little button there. Oh, that's awesome.

Hey, Justin, that was me.

My man. Who is this?

Terrell? Yeah.

My man.

Where were you like 10 years ago, brother? I could have used that. Oh, my.

That is the coolest feature on a mouse that I've ever seen. I was getting so

frustrated. I'm like, guys, I just want to close the stupid trade out, but I

don't want my strategy to go away. How do I get around this?

Thank you, brother. You're amazing, man.

All right, guys.

Let's keep going here real quick. You guys have such good questions.

Deepak, let's go and put you on here.

Yeah, absolutely. The question I had was when I loaded the main chart

and then the strategy, when I wanted to go back to the strategy, the edit, the

settings and all, it was all grayed out.

Is that just me?

Easy, easy. I got you, brother.

I got it right here. Let me show my screen.

You're doing nothing wrong at all.

Maybe I'll just keep my screen up here. It'd be easier instead of having to keep

sharing. All right, go to your strategy.

Your screen, more than likely, is going to look grayed out, right?

So let me go like this.

How many times when you go to your strategy does it look like this?

If it does, all you have to do is go to that settings, unclick this box right

here that says enable, and click apply.

You can then change any settings that are on here.

So it's just that button there.

So if you're here, I don't know, if I go into it right now with everything turned

on, you see how it's gray? Okay, this is probably what you're getting, right?

You're going to strategy, it's gray, you're like, how the heck do I change

these darn things? Go down to the setup, click this button off, and click apply.

Done. You can change everything right after.

Oh, that's fantastic.

And then the other thing is I've loaded the initial chart, you know, like the

previous one. But instead of the one I loaded, I should remove that and load

the MAC.

MACD 100 EMA. Yes, sir. Okay.

Yeah,

to try that out.

That's what I'm using, you guys. I'm seeing the most success. That's what the

people that are not having issues with this are using.

So that might just be the thing on your end to try. So, yes, load the MACD 100

EMA and then load the strategy on top. Yeah.

Okay, and a real quick one. Do you have to clear the cache for it to run

efficiently so the bars don't get locked and all? Do you have to go in the back

end? That's one question I always had.

You know what I'm talking about?

Yeah, man. I don't mess with my cache at all, or cache, C-A-C-H-E.

I have other people on here that do clear it. They have had better success,

but personally, guys, I have never messed with that function at all.

Okay.

I don't know, man. It has increased from the people that I've heard that do it.

It can't hurt to do it, right?

But personally, I have not done it myself, and so far, things have been

okay.

Okay.

Awesome, brother.

Thank you, Deepak, for those questions. I really appreciate you, man.

Let's go and go to another one here.

Bob, because I'm going to try to get down to all of you guys here, or as many

as I can.

Bob, do you have a question?

Yes.

I purchased on Take Profit Trader some accounts, and I inadvertently got

TraderVeid instead of Ninja.

Is there any way to get those TraderVeid accounts over to my Ninja platform?

Is there any way to get a TraderVeid account to show up on it? Are you

specifically referring to TPT accounts?

Well, I purchased these from Take Profit Trader. Yep.

And I made a mistake in selecting.

And I wound up getting the Tradovate platform instead of Ninja.

Tradovate and NinjaTrader at CQG are both operated completely fine on

NinjaTrader. So when you purchase your accounts on TPT, you're going to notice

the first section. The first box is actually highlighted on top. That

displays an image of both Tradovate and NinjaTrader. As long as you click that

one, all you need to do is when you go into your...

on NinjaTrader and you create a new connection, you're just going to use the

credentials on TakeProfit when you click on any account you have.

Plug that in and it'll load your accounts directly on NinjaTrader.

You can still use that and open up accounts on Tradovate, which is actually

how I originally started trading, as you guys know, because a long time ago I was

on TradingView.

But to answer your question, yes, you can use these accounts and load them

both on Tradovate and NinjaTrader.

Um, if you have that CQG checked on, which I believe you do, because you'd

have to manually choose a different one, take a look and try to actually, to

answer that question, go to your Ninja trader, um, section on there, go ahead

and go to the top.

And then when you're on there, go and do connections and then go ahead and either

disconnect or connect and then load that onto your chart.

Um, so to go to configure, right.

And then on here, what I want you guys to do is just go over here.

and click NinjaTrader, right?

And then on the right-hand side... Oh, I'm not trying to... Thank you, guys.

Hang on a second.

Hold up, hold up, hold up. Thank you guys so much for letting me know that. I

apologize about that. Let me pull this up.

All right, this should be pulling up a second. Okay, there you go, guys.

When you go to Configuring Connections, go ahead and just double-click on

NinjaTrader over here. It'll add it as when you're configured.

On the right-hand side, just put on here on the top, Just type in, so like me,

all I do is just take profit.

Hopefully I spelled that right. My worst spelling in the world. Take profit.

Right here, the username that you're going to use, go to take profit.

Click on the account that you purchased.

underneath like the eval state inside that there's gonna be a couple copy

buttons right next to your user id and right next to your password copy that

exact pass username and that exact password over here and go and do okay

once you've created it you can then click on that one that says take profit

and it'll load up on ninja trader right away so you can see all of your accounts

linked up here hopefully that helps um let's go to another question here

um

Gosh, I have so many on here.

Ralph, I see your hand up here.

Yeah, two things.

Number one, what if your Wednesday contest calls only used EMS?

That sounds ridiculous, but we just use EMS.

I kind of like that. Because there's a hundred different ways to use it.

So why not figure out the best way to use it?

Yeah. Well, that's actually kind of genius. So what Ralph is referring to,

on the Wednesday calls,

There's four calls a month. Two of the calls I like to do is trading

competitions, and I give away free take profit accounts. The other calls I do as

guest speakers.

Ralph's saying, why not have these competitions only be used with certain

buttons turned on, and the highest producer then shows what the heck

they're doing so we can all learn?

I don't know a better way to do that than, Ralph, you just nailed it,

brother. Let's do that. Actually, I will let you guys know that I already

disclosed to the team, not this week coming, but next week, with my private

team that...

Right now, at the moment, if you have three or more accounts, we are actually

going to be looking at live market data, clicking buttons on with this current

version, and we're going to see and test out different strategies to see what

works the best.

That's what I love this team for here, and that's also what I need to get with

them and ask them if there's a way that we can kind of morph this into

potentially getting more people on this call with that requirement.

Ralph, that is a brilliant idea, and let's do it. I'll just say it right now.

We're going to do that.

I want to say something to the lady in the UK.

Your issue is settings on your computer, display resolution.

That's where you've got to go solve this. So have somebody help you get to

settings, display resolution, and you want to go 1920 by 1080.

Thank you.

1920 to 1080. Okay, perfect.

Thank you.

Awesome, man.

Ralph, anything else you want to say before I move on to someone else here? I

always appreciate your input, brother. I'm done. Thank you.

Thank you, man. Thank you. Thank you.

Oh, gosh. I'm trying to hit all of you guys here.

Tom, with a green tea.

Tom, with a green tea?

Yes. Yeah, I think that's you. I think I can see the mic on there.

I think there's probably more than one Tom.

First of all, just to apologize for all the emails I sent yesterday, the

multiple ones. I figured I'd fix that.

My problem is a little bit different than everybody else. When I first

downloaded the strategy and the indicator, my Ninja was connected to

OneDrive. Since then, I've disconnected my Ninja from OneDrive and re

-downloaded.

It's coming in.

Everything works on it except it won't fire off a trade.

I'm getting the, I could use the chart trader without the

strategy. But once I put the strategy in the error message I'm getting, and you

asked me to send that to you, I sent that to you today.

I'm getting it on, it says unable to load ATM strategy template.

And the other one is error on executing database command.

Those are the two error messages I'm getting.

Tom, give me a favor real quick. Load up your screen, brother.

Do a screen share real quick. Let's look at this together.

There might be someone else who has this issue too.

Dale, don't worry. I haven't forgot about you, brother. I told you I'd have

your screen up here too.

But Tom's thing is I want to look at the A-team strategy and see how things are

set up. Give me one sec. Oh, wait, there you go. I think you should share a

little share. I think that's going to be a NinjaTrader problem.

I was actually going to tell you to navigate directly to this field

specifically.

Okay, there's a lot of errors that are on there.

I was on the phone with Ninja yesterday.

What did they say, man?

She's saying it's a scripting issue.

She picked the database. She made sure Ninja wasn't connected to OneDrive. She

disabled that already, but she's saying it's a scripting issue that you've got

to get with whoever wrote the script. They've got to call Ninja.

I'm not going to go there.

So I set up a new meeting next Tuesday with someone else from Ninja. Maybe that

person may have a little more in-depth detail.

Sure, sure. Okay, okay. I understand that.

But let's try something here real quick just so we can see this all together.

Go ahead and exit out of that screen real quick. Let's just go over to your

main chart real quick, and let's just look at a couple things that are set up

there.

Okay, good. Perfect. You have your chart trader on.

You have a couple screens.

Let's just blow up that middle one there as big as possible just so we can kind

of see what's going on. Perfect. And then if you want to get rid of that

market analyzer, just move it to the left-hand side so it's not covering up

the buttons.

Yeah, that guy right there.

Awesome, brother. Cool, cool, cool. Okay.

I'm just going to go through a couple checklists if you're okay with that with

me. Go to your settings, which is the second one over on the top right, so we

can pull up the strategy itself.

Yeah, right there.

Actually, I'm sorry. The one just over to the right.

Strategy.

Yeah. There you go, man.

Start off your own. Okay, go ahead and alert to the trades. That looks good.

That looks good. You have the button checked on. It says show label. That

looks good. Keep scrolling down.

Let's go all the way down to the setup section now, actually.

Keep going. Keep going.

Under here, go and click the...

Go and click that box off real quick and click Apply just so we can see

everything come up.

I have the eyesight of a giraffe over here.

Okay, so Sim Account 9. Sim Account 9. That looks perfect.

That is on there.

Click on the left-hand side where it says under Configured, the Strategy. I

want you to do this real quick. I want you to remove it real quickly.

All right, go ahead and add one more time back.

The one just up from there.

I think someone has a mic on here.

I got it. It was Robert.

Okay. Go ahead and then go and click on that button.

Yep. And then go and scroll up real quick just so it shows labels on the

chart.

Keep going. Keep going.

Oh, actually, right below there, below the box, go and do show labels just so

we can see it. Okay. Go and do okay.

All right. That should pop up on the chart. Perfect. Everything's populated.

All right.

I want you to then go to the ATM strategies. Let's just look at that real

quick.

Go ahead and do the dropdown on the ATM on the right-hand side.

Or you can edit it. Yeah, that's good.

Perfect. Go ahead and save that template.

Actually, no, instead of that, I apologize. Go ahead and X out of that

screen real quick.

Go ahead and go back over to the ATM. I want you to delete this actual entire

strategy on here because this is what I just looked at this morning. So, yeah,

you're there.

Yeah, go ahead and click on that or do the dropdown button.

to the right-hand side.

And then I should go into that cancel there.

Just click the dropdown button and then right next to it on the right, you're

going to see an option to just do remove.

Oh my gosh, you have a lot of strategies. That's awesome, brother.

So whatever one that was, anything that's called ATM 35, I just want you to

remove that one. So that now, perfect.

We're going to go into, okay, let's just set up one really quickly. Let's go to

custom.

Perfect. Let's just put 60 in the front, 20 for the profit, which is putting

something super simple. I just want to see if we can get something executed

here.

60, TP20, 3510. Save template as.

Underneath, go ahead and erase everything there and just type in ATM35

with no spaces whatsoever.

Brilliant. Go and do save or okay.

And okay. All right.

Let's look and see now.

If we end up getting an alert on here, I want to see what errors might come on.

Click on all your buttons. I don't care what it takes.

We just want to make sure it executes something, right?

So let's go here and let's see what happens for a moment.

The only last thing that I would recommend potentially doing is it may be

linked to this specific SIM account.

I'm going to ask one more question, though. Underneath your control panel,

you are currently linked up to live market data, correct, through either TPT

or a personal account?

Okay, brilliant.

then there's not a lot extra here. One thing was in the strategy, you had SIM

101 or SIM account 101, and he's at SIM account 9 right now. You know what?

Let's take a look. That's actually a good point. That does need to be the

same. That's the indicator tab. Yeah, that's what I need.

That's okay.

Thank you guys for pointing that out. Thank you guys for the extra eyes and

ears. Let's make sure that is the same one labeled.

All right. Go ahead and click that off, and then let's click that on.

Go and do apply.

There you go, man.

And that'll come in. Go and click that dropdown.

And then there you go. So you're on Semicount 9.

All right. And you're on Semicount 9. Okay. So now it looks like there's the

same one in the strategy is populated on your chart.

So, yeah, go ahead and click all those on real quick, brother. And let's see if

this will take any trades for us here.

The reason why I had you.

I know it sounds kind of silly, but actually remove that ATM strategy and do

a new one.

When you load it, sometimes you can get bugs within your strategies.

Yeah. I'm not going to say that you have a lot of strategies on there. So it's

not uncommon when you have those many to potentially get that error. But

basically what I'm trying to do is I'm trying to rule it out here, right? I

just want to make sure that this will work.

Does he have his button cut on the indicator?

On the indicator, buy sell buttons might not be checked.

The indicator doesn't have anything to do with the system to actually take an

order. It will just be an overlay on your chart.

So actually, to do this too, go ahead and actually go to your indicator. Let's

just turn off all the signals.

So let's go there and go ahead and go down to the bottom and click that on.

And let's just turn off all those buttons on the top just so we know that.

Actually, Ralph, that's a really good point because now we can see what the

system is actually going to take.

Click OK.

So this will get all this. So now what we should be able to see is since you

have alerts and trades on, when an opportunity does come up, this should

fire off. And if it does, we've kind of fixed that issue, and that would be

really, really good to get you off to the races here.

So I know this might take a second, guys, but let's just be patient and

watch this because this might be an issue that other people are having too.

And I don't think so. It's error on executing, but we'll see. When you go on

that, actually, let's go back to that.

Actually, go and do – hang on a second.

It might take a trade here. I don't know.

What I want you to try to do is I want you to actually compile everything again

in a second after you've made those changes to see what new errors or if any

errors are on there. But first, I just want to see if this will actually take

anything.

You've got your EMA filter turned off, so that's good too.

I think what it did, Justin, it popped up that error log when it encountered an

error. It tried to execute, and it didn't execute, and then it popped up

that error log because the timestamp on his newest error was just now.

It was just now?

Here, let me show you.

Okay.

Reinstall your strategy from your download folder.

Reinstall your strategy. You might have a contamination in that file.

I did that a few times yesterday. You did that already.

Then it's got to be a Ninja Tater problem because nobody else is having

this issue.

I know. That's so crazy.

Actually, Justin.

Yeah. This is Adrian. I am having the same issue. I can get 3510 to run.

I can't get 6416 to run.

I've reinstalled it. I've taken it apart, and I was on the phone with Ninja

Trader yesterday.

They set up an old bin like yours and your computer, and they put up a new

bin, everything.

Yep, and it's still not working. In fact, I'm just walking through the steps

with you guys right now. I just did the exact same thing, followed you all the

way, and I also got an error in my log as well.

What is that error that's coming up again? Sorry.

A error on executing DB command system.

Invalid operation.

Invalid operation exceptions.

On DB. Okay.

Is that the thing we're getting on here?

Okay.

Yeah. But it's weird because I can get the 3510 chart to run.

Really? But for some reason the 6416 won't. Same as I.

Same as I. 3510 won't work.

6416 won't.

So 3510 will work when you have it on the chart setting, but then you go over

to the other one. And you guys do have the ATM settings for both of those, both

specifically named ATM 35 and 64.

Correct. Let's try it real quick. Go to a 6416.

The price action is so slow right now. So this is going to slow it down even

more. So it might take a second to populate anything.

But I want to see if this is just – yeah, that's okay.

And that'll automatically change. Okay, there you go. It took it. There you go.

3510, it took the trade, and you're in.

Now you're at 6416.

So that did work, whatever we did, and it's fixing it because it's taking

trades. Go back to 3510 real quick.

Sorry. I just want to be able to see that this trade, hopefully before this

goes away.

But it did execute everything perfectly.

And I don't know, honestly, guys, the darn ATM strategy with literally the

space and those other things.

Seems to sometimes be that issue. Going to do okay.

And this should populate in a second.

There you go.

Perfect. And it's loading on there. Go ahead and blow up your screen closer to

price action so we can take a look at that.

Okay. And that was good. Now, the strategy, when I'm looking on here, the

strategy came off.

Let's load the strategy one more time.

I think it's because we're switching back and forth between all these screens

here.

That's okay. You have everything good on the right-hand side. Yeah, go ahead and

go down, and let's just put it onto that same account. I think you have the same

account 9.

You know, Justin, another way to load the strategy is to go to Control Panel,

right? Strategy, and you enable it.

Yeah,

exactly. So I want to actually go through her point real quick. Yeah,

that's easier than doing this, yeah.

That's what I've been doing.

That's what you're doing?

Yeah, that's what I'm doing. Like she's saying, so on the bottom of your screen,

you'll notice on your control panel, you can actually go to strategies.

And on the very bottom is an option you can kind of enable or disable it, which

is probably a much faster way to do it. I'm actually glad you said that.

It literally does a tick. You just tick it. Okay, okay.

That's good to know.

At the moment, I do want to get to other questions.

Let's leave this up here for a second. It does look like it has fixed things on

there, which I'm really glad that we were all able to actually see it

execute.

But I'm going to try to go to another question here. Go ahead. I'm going to do

this real quick. I'm going to get rid of your screen, Tom. Keep this open. Keep

us updated as this goes, right?

But I'm going to get on to a different question here in case someone else has a

different one.

Guys, I do have to let you know I have to respect time today with things going

on. At 11 o'clock is the latest. I will keep doing this as long as I can, but do

know that we will have to have an end to this, and I will continue either through

e-mails and other things to try to answer this.

Greg Childers?

Hi, Justin. It's Greg.

Hey, brother. Hey, thank you so much. Great work. Follow you every day.

Thank you, man. I appreciate it.

A lot of times what we do is trail body, you know, when we manually do it, trail

body, proper candles, high or low.

Yeah. That's something that we would have to automate within.

the program, the strategy, or is that something we can build an ATM for

outside? You're saying for like trailing above or below a candle when we enter

it?

That's not a good question, man. What I've been doing is I, and this is

actually what we did on the team the other day, is I'm noticing that let's

take a 64-16 chart.

What the heck? Get out of here.

Let's take a 64-16 chart for, yeah.

Let's go to 6416.

What I'm doing is on my ATM strategy, I'm just putting my stop loss at 120

because that's actually the length of any reversal candle.

And if we do get a reversal candle, it means it's gone in the opposite

direction. So let me show you that real quick.

Take a look at this, guys.

Let's say we get in on this trade right here and we take it.

The measurement from top to bottom of these candles is, I don't know, it's

like 20 something, 30.

No, that's not right.

Maybe I'm looking at this wrong. Oh, shoot.

I have my setting, just so you guys know. I have it as 120 as the stop loss

and then almost like an infinite TP.

And the reason I do that is I want to get into trades right now to let this

breathe a bit more.

Let me try to find a trade here real quick that goes through.

Like this.

This is one of those trades that can be so frustrating, and I've seen more

trades like this in the last month than I have in my entire trading career.

So just know that you're not alone on this, and I hate this candle right here

because this is your perfect entry, but that darn wick is taking us out.

Way to do this, whatever ATM strategy you have, the stop loss when I enter

into my trades now, I just click and manually move it right below this

candle.

Now, if you have a two-step on your ATM strategy, let's look at this real quick.

Actually, I need to add mine anyway because I think I got rid of ATM 60.

So let me just build one so you guys can see. So let's say I want to have this as

a stop loss is 120.

Let's say infinite, right?

I want to go and make a custom strategy on here that says every time this moves

in my favor 19 ticks, I want the stop loss to move up with me.

So our initial stop was 120, right? As you guys saw, that was 120.

And then every time it moves in my favor, go 19.

Well, what's nice with this.

TM64, no spaces, is whenever I get in, I can then manually move that stop below,

and as price increases, it'll move my stop up right below and then trail it

for me.

That's why I've started having a larger stop to start, and I wait two candles

afterwards. You will notice a couple candles just like this.

Prime example as well. You guys know this is our candle to enter in on.

We want to capitalize on what? We want this movement down or we want to trail

to at least this point here to get 11 points profit, right?

I do not want us, and it's so frustrating to get in a trade like this.

It pans out perfectly and then this darn wick comes through and it takes you out.

Wait, put a stop loss right here instead. I want you guys to try this.

Again, this is just my own advice, not financial advice. Put your stop loss

right here.

As it moves.

you will notice once two candles close, you typically get that trend, and then I

want you to start trailing.

That has been my saving grace because over a month ago, it's been super clean

transaction. I feel like whenever I do upgrades, the market makers know exactly

what I'm producing, and they put these darn wicks in here, and they tag us out.

But that's how I would do it. Put your stop loss or your A-team strategy with a

little bit bigger of a stop so you can manually move it right after you enter.

But if you're specifically trading the doji candles, which are, some of the

most powerful movements i just want to have that stop um below and then have

whatever target um great justin thanks appreciate it awesome brother okay okay

sorry i probably elaborated too much on that i apologize guys we'll take it all

thank you man um let's go to another question here that we have um i think

some people already have their hands on that were on earlier gosh um Del, I do

want to get to your question. You know what? Let's do that real quick. Del, are

you still on here?

Yeah, I'm here.

Del, go ahead and share your screen real quick. I know I said I would get to

this. I don't want to forget it. So let's get on because your question might

be the same as other. And I think you were more or less trying to upload this

from more of a scratch basis, which I think is something good to let's address

right now as a team and see if we can figure this out for you.

Thank you.

You're welcome, man.

And when you share your screen, go ahead and do the full screen just in case we

need to look at different applications.

Awesome. I think it's going to do.

It'll just give it a second. Okay. I can see full screen there.

Yeah. This is what was happening on mine.

Excellent. I want you to right-mouse click on your chart anywhere.

Go down to templates.

Go to load.

And then stop for a second. Default. You don't have the template loaded.

Go to your email or to the Gumroad.

Actually.

Stop screen sharing for a second. I don't want to show any personal

information on here.

Go to the email that was sent when you purchased the WaveRunner metrics.

Inside that, I want you to download the template, the folder that says

MACD 100 EMA.

It just hasn't loaded the actual template on your chart.

There is something else that I'm also noticing.

I want you to download the folder that says Ninzarenko.

Download both of those real quick.

And then once you've done that and it's in your download folder, let me know. If

you're okay keeping this up, I can walk this through you as well.

Is that okay?

Go to your web browser. Open up the email that you used to purchase these

metrics with.

Oh, sweet. There we go. Go ahead and do view content on there.

All right. Let's do – okay.

Go ahead and input that.

Yeah,

input the email address that you used to purchase the product with.

Winchester Dumbo.

Man, you've been with us for a while. I appreciate you, brother. Your support is

amazing.

All right.

Scroll down below this.

I want you to scroll up a little bit. Sorry.

I believe you have the SMM main chart because I can see the dashboard on the

bottom. I want you to click download on Ninzarenko, and I want you to click

download on Mac. So on the right-hand side, click download under the

Ninzarenko.

Perfect. Yep, you got it, brother.

And then I want you to download the one right below that that says WaveRunner

MACD 100 EMA.

So you just did that one. That was the Rainco. The one right below that that

says MacD. There you go.

Awesome, man.

Go to your documents folder on your computer.

So that yellow folder on the bottom.

On your kind of your control panel screen for your main.

You can either go through there or that yellow folder that's down there.

Yeah, there you go.

Go over to downloads.

Right mouse click on the very top one, and I want you to click copy.

The one that says WaveRunner MACD 100 EMA.

The first one, this one. You got it, brother. Yep. Right mouse and click

copy.

All right. Did you click copy on there?

Sorry, it blinked out. The second one over on the top right.

Awesome, man.

Go to now your documents folder.

So it's right below downloads on the left-hand side.

Brilliant. Click on Ninja Trader 8, which is like your, yep.

Click on templates.

Scroll down and find templates.

Actually, you were almost there right at the top. There you go, man.

Click that.

Find.

Oops, don't rename it.

Double click it.

Yeah, double click it, yeah.

Actually, click off of that and then double click back on it.

Yeah, there you go.

Go to chart, third one down.

Double click it. Right mouse click and paste that sucker.

Top button.

Brilliant.

Minimize the screen.

Go over to your Ninja Trader chart.

If you have your chart open on NinjaTrader, I can't see it just yet.

You might have to drag it in view.

I see it at the top. Go to the top right. It says T.

Probably to the top. Keep on going over.

On the bottom. Actually, go ahead and click on that.

Yeah, there you go. Just click on that chart there, and that should populate.

You might be using a multi-screen. If you click the red NT on the bottom, and

then you choose that chart, yeah.

There you go. Brilliant. You got it, man. Right mouse click anywhere on this

chart.

Go down to templates, load, and choose the one you just did, WaveRunner 100.

Go and do, yep.

Click the F button in the top right corner, the second one down, not the top

one, the second one, please. Yep. That's okay. You did it anyways. That's fine.

All right. Your templates and everything are now loaded on here. So this is the

base.

He's running an 88 slash 4.

Yeah, that's okay. To start, I just want to make sure the template's loading.

You're absolutely right, though.

You can now change this. So before we load the strategy, go to your data

series. It's the fourth button over on the top over from the right.

So count 1, 2, 3, 4.

That's the strategy button. We'll get there in a second. Good thing is you

have it downloaded.

Go over 4 from there.

So exit out of that screen real quick.

This one?

Yeah, exit out of that screen.

On the top bar, it's the fourth from the right.

Yeah, it's the fourth over.

So go left, that one right there. Click that.

And then there you go. You got it. Where it says eight on the top, the third one

down.

Change that to 64.

And change that four to 16.

One more thing before we do this. Where it says five for days to load, change

that to one.

It'll make things much quicker for you. Awesome. Go ahead and click okay at the

bottom.

Just okay.

If you guys ever click apply, it won't get rid of the screen, but it'll apply

to your charts. Okay, we'll just apply it right away.

You guys are really doing that the hard way. You know that, right?

I know. I'm trying to just – this is a little bit easier for this side. You're

right, though. Okay.

Go to your –

Strategies tab at top.

I know.

Those button features are much better, Ralph.

One over to the right.

This one?

Just one over.

There you go. Yeah, click that one there.

On the left-hand side, it says Strategy SMMv4. Double-click that.

Try it again.

There you go. It'll populate under Configure. There you go, man.

You're good.

On the right-hand side, scroll down all the way until you see the setup.

Actually, hold on a second. I think your computer is going. Click on one of those

on the left-hand side, and I need you to remove it real quick.

Click on the second one that loaded underneath the configured side.

So forget that screen for a second that you're scrolling on. To the left-hand

side, do you see how it loaded two indicators down there or two strategies?

Click the bottom one. Yeah, click that bottom one there.

Yeah, click that and click remove on the bottom of that area.

Yeah, remove just one of those.

Okay, now on the right-hand side that you have that, go ahead and scroll up

actually on this chart since it's not – you're actually going to get the bot.

Keep going. Keep going.

Keep going a little bit more.

Actually, scroll almost all the way to the top.

I just want to check something. Okay, you have alerts with trades on. That's

perfect. Right underneath the black square, you're going to see something

that says show label. Check that on.

So right underneath that black square, there's a box that's not checked on.

Check that on. Perfect.

Scroll all the way down now to where it says set up.

Don't mess with anything else on this screen.

Keep going. It'll be down a little bit.

This is just all the default stuff going on.

This one. Scroll down a little bit more. Yeah, scroll down a little bit more so

we can see all that.

All right. Go and stop at this point.

Click on where it says SIM 101.

There's probably another step that we have to do, which I can show you guys.

Okay. You have take profit on there. Great. This SIM 101 count sucks. I'm not

going to lie.

Try this real quick, though. I want you to click.

Keep it on SIM 101 and then scroll down a little bit on your chart.

Let's just click enable.

to make sure that this will come on. So that box that says Enable that currently

isn't checked on, click that box on.

This one?

Yep. Click Apply real quick. Don't click OK.

I just want to see it populate on the right side of your screen.

So click Apply right now.

There you go.

Okay, let's see.

Yeah, go ahead and just do OK. Go ahead and go through that.

Perfect. So everything's loading up, and it's on your chart. I love the looks of

that.

Go ahead and do OK on here.

So right now, you have a couple things. Everything, you have the chart loaded

correctly. Perfect. You have the strategy loaded on here. That's great.

Your account is set to SIM 101.

Your account on here is set to SIM 101.

The thing that you need to do now, which I don't think you have yet, which is the

most important, is I need you to create an ATM strategy.

Where it says ATM and it says none, click that dropdown.

Go up a little bit.

And then where it says none, click that one there. You got it.

Click custom.

Just for the heck of it, you can do anything. Under the stop loss, type in

120.

Under the profit, type in 40.

Do save template. Save as template.

And I want you to delete what's down on the bottom there.

So you can just do the backspace where it says ATM1.

Keep those. Doesn't matter. On the bottom right there, delete everything in

that field.

Awesome, man. In cap, type in 8TM64.

No spaces.

Brilliant. Click save.

And okay.

Save as complete?

No. Okay.

Great. Now, click on every single one of your buttons on the chart, the EMS. So

buy long, sell short, continue short, every single button on the bottom there.

Light that sucker up like a Christmas tree.

So go down a little bit where it says buy long. Click that on.

Click every one of those buttons on.

I just need to see if it take a trade. So click on the continue short. Click on

those other ones.

I only have three. Buy long, sell short, continue long.

Do you see the continue short repeat buy sell?

Yep, yep, yep. Click on all the ones that you can see on there.

Okay, perfect.

And then move your screen over to the – or the chart over a little bit just so

we can see current price action.

All right, and then now just don't do anything at this point except blow that

up. And I just want to see if it's taking trades.

Now, guys, if you have followed all these steps as well and for some reason

doesn't take the trade, the number one thing that this is is the SIM101

account. That is a default account that is done by NinjaTrader that for some

reason gives the biggest issues possible.

So what I'll show you.

I don't know if you're aware of how to actually create a new SIM account.

It's extremely simple, but let's just wait here for a second to see if this

populates a trade to know that we're either doing everything right or not.

Keep all those turned on. You have your ATM64.

You have an ATM64.

There shouldn't be any issues at all with firing off a signal here and

getting something to come through, and you should be off to the races using

these buttons. But let me just stick here with this for a second.

Dustin, while you're on that screen, can you come right click and just show us

the list of indicators that were listed that were installed with that template?

Because I have that installed, and it seems like it's installing everything

twice. It's got two of the FMM dashboard.

It's got like, I don't know, it's like 23 indicators.

The reason why it has – good question. So two SMM dashboards is specifically

because the indicator that's on top that has the buttons on it, I had to double

up on the dashboard indicator itself to have that populate with those buttons

because I'm basically reusing that indicator twice. Now I'm making – okay,

thank you. I just saw so many things. Totally, totally. You're like, what the

heck are all these other ones? There actually might be some on there, you

guys, that you might not need. I just kept it on there because I didn't want

to like – fudge with anything, and I figured if I take one of those suckers

off, I'm going to mess up everything.

Just know that there's multiple ones on there specifically for this layout.

Good to know.

Good to know.

If you guys are having this issue, you guys see that white lettering on top?

While this is playing out, I want you to go up to your strategy tab one more

time.

Although I don't know why it's grayed out. Why is it grayed out on the top?

That's really weird.

Does anyone know why that would be there? Go ahead and click on your main

chart anywhere.

His screen resolution is messed up. It is. He can't even see his doji at all.

No. You might want to actually adjust this screen itself in like

the minimize mode so you can see the doji button on the bottom. But go up to

your strategy.

Actually, can you see the doji button on your screen? Maybe it's just not coming

through on us.

No. You can't.

Click the minimize button on this.

Not the minimize. I'm sorry. The one just to the right of that.

I'm sorry. That was my fault. I did say minimize.

Open that chart back up and do that double window one.

I just want to make sure that you're able to see all these buttons.

So on this screen, go ahead and click the button just over to the left of the

X button on the top right.

Yeah, click that for a second just to see.

Okay, there you go.

It's just how you have it on your chart. So, yeah, go ahead and click that on as

well.

Perfect. So go ahead and blow this back up.

You might want to actually look at adjusting that when you are trading just

to make sure that you can actually see those buttons and just adjust that.

So click on your screen anywhere.

on the main chart and go up to your strategy tab one more time.

I'm going to show you guys how to get rid of this lettering that's kind of

distracting. Yeah, click on that.

On the right-hand side, scroll all the way down to where it says setup.

All the way down.

Keep going, keep going.

All right, there you go, brother. Scroll up just a little bit.

Click that little button that says enabled. Go ahead and check that off.

Oh, gosh.

No, it hasn't. Actually, scroll up. You went down too far.

Scroll up a little bit on this screen. Oh, I'm sorry. He went up too far. Click

that. No, you got it. You just clicked the setup button. That's okay, man.

Enabled on the bottom where it's clicked. Go ahead and check that off.

Guys, under the label, click apply real quick on this screen.

So on the bottom where it says okay, cancel, apply, click apply.

There you go.

Where it says label.

Oh, shoot.

Go back to that strategy window there.

Where it says label, if you guys just delete that name and click okay, it'll

get rid of all the lettering. Go ahead and scroll down on this down to setup

one more time.

You're going to be so familiar with this system. By the time we're done, you're

going to be an expert. You'll be teaching me how to do this.

There you go, brother. Where it says label, highlight everything in that box

to the right of where it says label and just delete it.

Yeah, and then just click delete. All right, click enable back on on the very

bottom of that section.

The enable button just on the bottom.

Right below where it says wait until.

On the bottom of the setup section.

Yeah, on the very bottom of the setup section where it says enable.

Go over to the right and click that button on. There you go. You got it,

man. And now click okay.

Click that. Go ahead and click that on. That's fine.

All right, there you go. Sweet. You guys see that? I got rid of that on the top,

so all that extra writing.

If there's continued white lettering on the top, it just means it's from another

indicator that you have populated.

Go into that individual indicator, go under setup, and just get rid of the

label.

That'll do that.

Let's do this real quick. Go ahead. I'm going to ask that – go ahead and turn on

the repeat buy and sell and put on the repeat continuous.

And I want – yep, go ahead and click those two on.

I'm going to –

Try it one more time.

Boom.

Somebody closed the market. It's not moving a tick. It's not moving at all.

I'm like, what the heck is going on right now?

I'm going to do this, Del.

I'm going to stop your screen share.

Don't get out of the screen.

Keep it on here because I want you to monitor this, and I want you to tell me

if it takes a trade, okay?

I want to get to another question here.

Guys, I do have – I know there's a lot of hands up right now. I understand

that. I do have to keep this to another about 10 minutes on here.

Justin?

Yes.

Justin, this is Wasik. I am scheduled for surgery in about an hour and a half.

Can I ask one simple question, please? Please, go for it. Fire away.

I hope your surgery goes well, too. On the strategy section, there is a time on

the EMS strategy.

It's set to 7 and 11.

What is that? Is it set to Eastern Standard Time? Which time zone?

I had the guy specifically I put in. I want it to be PST.

Guys, I might get rid of that button.

I'm not going to lie.

One, do you guys think it's necessary to have it on there?

If so, I'll keep it there.

I told them PST because I'm in PST.

It is a 24-hour clock, so you have to basically put in all of it. No, don't

get rid of it.

And it's local time. Whatever your time is, it takes it off of your computer

clock. No, no, no, no. It takes it off your chart.

So you can have your chart time be different than your local time. I do

East Coast time, but I'm on the West Coast.

Here's why. I've done backtesting using playback data, and I found by cutting

out a couple hours, I can save a tremendous number of lost trades.

Totally. What are those hours that you're finding?

Well, that's a big can of worms. I don't want to get into that right now. But I

promise I'll bring it up at one of our meetings, okay?

Okay. Okay.

So to just say that again, and I think it was Rick that was on here, what he

was saying, if you have that on, it's going to go off of whatever time is on

that chart, specifically on the bottom. So if you're East Coast, West Coast,

whatever, base your time frame off of that down there. Thank you guys so much

for that.

Was that the only question you had, brother? I want to make sure.

One last question, sir. Fire away.

We're on Gumrod. Can I get the TradingView version 5?

The TradingView version 5.

On TradingView, you have the SMM version 5.

So when you search through your email,

type in Gumroad and go to the purchase email that's on there. Click on the

content folder.

Every single one of the most updated templates on that version back then will

be displayed on there.

Just click on the most recent one, and that'll be the latest update for that

specific platform.

Thank you, Justin, and God bless you.

You're the best. I hope the surgery that you're going for is well. I'll be

praying for you. I really hope that's not something too serious.

I'm calling you from the hospital. Thank you, sir.

You're welcome, man. Hey, God bless, man. I hope everything's okay with you,

brother. Thank you, sir.

You're welcome, man.

A few more questions here. Does anyone have anything where they're on a meeting

and they need to get out right now that I can just address a quick question

with? Where do you load the Renza?

Yeah, question. Awesome, brother. Let me do it right now.

And that was actually – oh, don't do that.

screen share really quick while you're loading that up i just had one quick

small question when we're able to trade gold and mym and all the rest of these

things are you gonna have some kind of little chart out there that tells us

what the best settings are because 64 16 does not really work well for anything

but do not you 64 16 is specifically for the nq 15 5 jot this down

for es and i actually have been having traders use uh 35 10 also on gc as well

Other ticker symbols I haven't experimented with yet.

Let me talk to the team on Wednesday and other people I talk about. If anyone's

on here right now while I'm about to show this, if you have a setting that

you've used, say it now so we can jot this down and people can look at it.

But I don't know about those other ones.

And please interrupt as I'm doing this.

Your question. Oh, yeah. You were saying for the Ninja Rainco.

Yep. Go to your control panel. All I want you to do is go to Tools, Import.

select the ninja script add-on and choose the file that's called ninja

script or excuse me that's called ninza ranko right after you load that it may

ask you to shut down ninja trader and bring it back on again you've done it

right if it does that if it doesn't it's okay click all the yes buttons

afterwards what you'll notice is when you open up your chart and you go to

your data series the way to find this is this is going to be set to probably

candle or

Something else. Or minute.

I think the default is minute.

What you'll want to do is click type.

And it's going to be at the very bottom.

And it'll come up as NinjaRanko.

That is where you can then choose the field of 6416 or 3510 to be able to

populate whatever you want. And then once you click okay, it'll then do that.

Does that help answer that question?

So tools, import, NinjaScript add-on.

Choose that file that's specifically called NinjaRanko, which is in the

content folder after purchase.

Click any buttons as you go through. Go up to your data series.

Make sure that you search for NinjaRanko, which is the very bottom

one. Input your settings, and you're off to the races.

Let me go like this.

You're welcome, brother. Thank you for asking that question. That's a really

good one.

100 over 25 if you built a custom candle.

It's amazing.

Like during the open on the New York, ultimately I just want to have one big

-ass brick, okay?

But no, it just smooths it out.

And then, you know, within two hours of open, you switch back to 6416 and it

becomes a managed.

Tom, say the figure real quick.

100.

Over 25 at market open?

Yeah. Okay. You do that for how long?

A couple hours.

A couple hours? Okay. Based on the volume and the volatility and all that,

you just sort of, when it's, just pick a day and scroll back through. Load it.

And change it over to 100 over 25 and watch what happens. Hold up.

I'm trying this right now.

Is this the secret sauce?

All right. Amazing.

Also, 124 over 16, too, works really well, and it looks more like a 10-minute

chart, and it's slow and smooth, too.

Oh, no way.

And for automation, you let that sucker run all night. It'll just, you know, one

bar every 15 or 20 minutes.

Oh, my gosh. That's so much smooth right there. Let's go back to market open. So

market open was freaking awesome.

So my APM, okay, depends.

How I would do it, if you guys want my opinion on this, let's just look at this

together. Measure the length of the doji candles when you get them from top to

bottom, and that's your stop loss.

Now, this is going to be big. You don't trade five micros with this, at least to

start. This is 47.

Let's just say this is 50, right?

The tick size is you take this number and you times it by four. So that's

essentially saying that your ATM strategy over here would actually be a

custom of 200.

Am I getting that right, guys?

Is that 100?

It's not for the faint of heart.

Is that right? No, but I love this, though. And put infinite TP.

What you could technically do under this, though, is you could say, all

right, keep my stop loss at 200, but every, like, 10 points that it goes in

my direction, move my stop loss up, which would be kind of nice.

And then that would say, all right, stop loss is right here. I'm entering in on

this trade.

Because, guys.

Forget the stop loss.

You're not, worst case scenario, you will get stopped out here if it's for

some reason reversed the exact opposite way and you get worst case scenario.

Best case is the next candle closes and you eliminate half of your stop loss

risk and you're moving it up, right? What I would say is just wait a candle

or two.

I mean, look at this right here. You get this reversal candle on this setting. I

love this setting, by the way. This is brilliant.

And you wait a candle or so and you trail this sucker all the way down.

What you will make on a higher timeframe is going to be more.

This is probably a 75-point move.

But if you're trading five micros, that's $750.

I would say if this was me starting off, I want to trade one to two micros to get

used to this fluctuation.

Dude, look at this trade right here.

My gosh.

That's a perfect trade coming back down.

You've got another trade right here coming back up.

You've got the reverse. Scroll back to the middle and you'll see a run. I

guarantee you'll see a run that goes on for like four hours.

Oh, my gosh. Actually, that's a fat run right there too.

Maybe there's even more.

Hey, Justin, another workaround for your ATM, instead of changing your ATM 64

every time, is you can actually, in the strategy properties

where you have the ATM 64, let's say you made a different ATM called ATM 200.

Yeah, you just put in ATM 200 in that ATM 64 spot in number two.

And as long as they match up ATM 200 and ATM 200, you know.

So I could have this and say, I want to have an ATM 200 that we just made. As

long as this name matches one strategy that I have over here, it'll link up.

That's brilliant.

I guess, I mean, coding-wise, that actually does make complete sense now.

That actually would make sense.

Okay. So you don't have to actually use these names.

But just whatever name you do choose, just make sure it's under here. That's

what you're saying? Yeah, that way if you're someone who has like six

different ATMs, you can just change it into the strategy properties.

That's amazing.

I do something similar. I save different versions of my ATM strategy, and I call

it ATM 64 standard, ATM 64 trail 50 or whatever.

And then I'll just – bring it up, edit it, and save it as the ATM64 template.

So I'm constantly changing the ATM64 template that I'm using.

The actual template, okay.

But using another template, bring it up to edit, and save it as a new ATM64

template.

Oh, that makes sense.

That does make sense, actually. Okay.

I had one quick enhancement request, and that was a question.

A session profit limit and session stop loss limit. So like if you're setting up

a $100 quick hitters type of thing, once you're at $300 for the session, you'll

stop making trades for the rest of the day.

You can actually set that up automatically already.

I think Ralph is actually going to go on the show. You can do that and you can

set daily stop and also daily take profit limits where if you hit it, it'll

just not allow you to take any more trades.

That's something you'll want to do.

through that side, not specifically through the strategy, though, but it is

possible. It is possible to do that.

Ralph, do you know or anyone on here just real quickly where specifically

even on that they would go? Risk settings.

Risk settings. Okay, Kurt.

Yeah, you go to TradeOvate, you go up in the upper right-hand corner, and it's

the top space, settings, and it'll bring up all your accounts, and each account

you can set separately.

Then when you're through, you go back and X out, and it'll be stored.

But that was only true for Trade of Aid prop firm accounts, I'm guessing?

Yeah, but what are you using with Ninja? Are you using the cash account?

Cash account. Oh, that's different, yeah. Okay, yeah, that would be

different.

There's applications out there that do that for you. I run my cash account for

Trade of Aid, too, and I do the same thing with it.

You do the same thing, Tom, with your cash account? Yeah, I have my cash

account running through Trade of Aid so that I have those settings.

Okay, and it does work with the individual accounts too, right?

Absolutely. Okay, perfect.

Good to know.

I even have my NinjaTrader paper trade account running through TradeOvate so

that I can test things and test the signal chain and all that.

I don't have surgery, but I do have a doctor's appointment in 30 minutes.

Real quick one. I noticed when I had really fast action going on.

running on a SIM account.

I have yet to, because I've been running into bugs, I have yet to trade this live

because I'm just not confident in it or me enough yet.

But I think I know maybe where the source of it is.

What's happened when the action gets real fast, all of a sudden it'll start

canceling the limit order that it just placed.

and it will leave a soft order hanging on the chart that I can't get rid of.

The trade's closed. Everything's done. I can't get rid of it. The only way to get

rid of it is to reset the SIM account.

So I think that I answered my own question. This is just a problem that's

native to SIM accounts, but I wanted to see if that's something that I need to

worry about on a real account because that's terrifying.

I've had a lot of... Personal experience, I've had a lot of issues

linking SIM accounts.

Yesterday I was trading five TPT accounts together and other ones, and I

don't have a SIM account linked in any of those, even through Replicanto.

Others, you'll also hear them say they like to have the SIM account actually at

their leader account, and then they have others gone there.

Let me open this up as a question to every one of you guys here. Have you

guys experienced that same issue?

Are you seeing it better without a SIM account linked to those with it on?

What is anyone else's kind of input on that?

If I can. It's happened to me a couple of times, even without a SIM account.

Without a SIM account, too. Yeah. It doesn't happen often, but it does happen

sometimes. It happened to me twice in the last day and a half. It did. Okay.

But it really is, there's nothing there. If you go look at your position, it's

like, I think it's some flaw with NinjaTrader, honestly.

Yeah, it very well could be. I think it's just something, things get going so

fast. yeah yeah so uh two times happened to me uh for the same thing i enabled it

on the actual uh prop account and the strategy took all the trades at the same

time even like when i was enabling it and then the end goal is like uh at the

end it's like minus 400 300 right because it took like 10 trades in the

burst and i saw all the sl and tps on the ninja trade chart

Is that when you were first loading it on and you were clicking on the buttons

to choose which ones you want, and then one of those buttons was actually

activated right away because the setup came in and then it activated all of it?

Not just clicking the button, just enabling it.

So if you enable – let me go like this, and then we'll have to

probably call this. Without knowing for sure, that sounds like what happened to

me, and that was totally related to on candle clothes instead of –

By the tick or by the price change. If you leave it on candle close, that's

all. On candle close. Okay.

Okay.

I think that field should just be coded out.

Totally. I wish it was.

I shouldn't feel like this because, you know, sometimes when you load it, I

mean.

Now I'm looking at this. I think when you get that indicator off and you load

it back on, whatever buttons you had clicked, I think it might actually show

on. So if you had a couple of these buttons on previously and you try to

load it, and if for some reason one of these opportunities are presented, I

have had that where I enable it. I'm like, oh, shoot, it's already in a trade

and it's taking something.

We may want to have it where it's just like this when we're closing our

templates out. Also, if you guys have this in all gray, it will not take any

trades. So if you want to step away from your computer or turn it off, that's a

good setting there too.

Two last requests and I've got to jet.

One is, because I'm a spelling Nazi, please fix the spelling on the

continuous button.

Well, good. It's getting deleted anyway.

I'm OCD about spelling, man. I will say I did not spell it, but I'm not throwing

my developer under the bus because I'm the worst speller ever. Thank you.

Real quick.

The last one is – Tom, go ahead. Yeah. I think you desperately need a

conversation forum for the group.

Okay. Don't use Discord. Use Skool. Please.

Wait. What was that? What was the recommendation?

Do not use Skool. S-K-O-O-L.

S-K-O-O-L. And is that a chat group?

It's a chat group, but you can do video conferencing. You can do video.

And it's just so much better organized than Discord.

Discord is just a mess.

Skool is good.

Is that something where I could hold like my TPT calls and the private things

where like everyone who's interested in this. And they're limited to people who

have the access to it. You can send out, you can have a schedule, you can send a

membership, you can do whatever.

I'm jotting that down right now. You have a free, a free part and a pay part

you can do.

And it'll, I don't care. And it'll allow the, it'll allow your, your members and

your customers to interact with each other and learn from each other when

you're off on vacation.

I like that. But it's spelled with a K.

You're right, Tom.

It's much, much better.

The only thing I've seen with some of that stuff, guys, is the reason the

Discord is no longer available, and it's been off for almost two years now, if

I'm not on there continuing monitoring things or I don't have administrators

that I trust that are on there all the time, things can get out of hand, and I

don't like that at all, which is why when I do my private calls, I'm the

leader of those calls, and I can moderate everything on there.

Even with that said, though, going forward, if it's something that I'm

thinking of opening up more calls per week with so we can go over this, that

might be something I might migrate over to. And actually, I might reach out to

you guys for help on that with setting up on people that are more familiar with

it. I might want to do a Zoom call with you guys in like the next few weeks or

months when I get back to try to set that up because if it is better than –

I'm not using Discord. I can't do it.

But if it's better than just doing Zoom calls like this – It's only 1,000, and

it's got a Zoom function built into it. It does?

Sweet. Oh, sweet. That's even better then. And it's only 1,000 times better

as well.

It's only 1,000? Yeah.

Tom, I want to make sure. Was that all the questions that you had before you

had to leave? It is, and I really appreciate it.

Thank you.

Justin, FYI, the trader just took a trade.

Sorry, you guys. Give me one second. My wife and daughter just came in.

I just want to – it's going to be a little bit loud with the door closed,

and I will hit this question.

Okay, now it's quiet.

Steven, was that a question from you?

The trader took a trade.

All right, I have – okay, I have two people talking. The trader took a trade,

so – Oh, good.

Good. So it did take a trade, right? You were saying?

For mine, it did, yes.

Okay, okay, good, good. Awesome. Thanks for updating on that.

The other person had a question there. Yeah. Yes. The template for MACD 100

EMA, is that on Gumroad somewhere? I've been using the Hyperscopper 2.

So is it listed as MACD 100? Yes. Or is it listed as something else?

Yes. Underneath Gumroad, content folder. Yeah, man. Just go ahead and scroll

down. It will literally say MACD 100 EMA.

Just download that one and then load it through your kind of a Ninja Trader

templates chart, and then you'll be good to go. Yeah, yeah.

Thank you, brother.

My question was how do you upload – I downloaded that thing like seven times.

I can't find it on – What specifically did you download, Edward?

Well, I'm trying to upload it.

to NinjaTrader? I can't find it. It starts in your downloads folder. You've

got to copy it out of the downloads folder and paste it into the NinjaTrader

8 templates folder.

Ah, okay. Maybe that's what the problem is. Okay. And this is, please, please,

please, guys, the install video that I provide walks it through step by step on

exactly how to do this. Please watch that video.

It'll be a massive help. It literally goes from a blank screen loading Ninja

Trader to show exactly how to do it.

And if you still have issues after that, please let me know.

Guys. At this point, I do have to call this at this point just because of

things I need to do with family and whatnot.

I want to just thank you guys for being on this call. Thank you guys for being

so professional on this.

I know there's been a lot of success. I know there's been some people that are

having issues. I hope this was really good for you guys, and you can tell.

Guys, I seriously care about you guys. I really, really do. I am dedicated with

my developer to turn this into the best EMS you've ever used. Your input, I want

it. I am not alone in this game.

What you give me makes it better for me, so why would I not listen to you guys,

right? So I hope you can tell my voice in just how I conduct these calls. And

even taking the time out of the day to do a free call for a couple hours for

people that have invested into this, I'm here for you.

Just to summarize things a little bit with a couple questions people had, to

start off with.

Guys, thank you for all the reactions I've seen come through here. Absolutely

amazing. I really appreciate it.

My developer, I've already sent those changes to my developer yesterday.

He's checked off. I've paid him everything. He's working on it. He has a

return date of eight days. He doesn't take that long. It's usually sooner.

I am away next week, which is why I want to do this call.

I have to be away.

Just taking care of some things. I will be back on YouTube that following week.

If I have any updates and changes to the metrics, I will first show it on

YouTube. More than likely, that Wednesday call in the private TPT group,

I think I might load it on there to kind of get other people's input.

You don't have to be on that call, guys. I'm not pressuring anyone to join that

if you don't have three or more accounts.

But with that said as well, I also want to talk to that team and see, hey, is

there a way that we could allow more people onto this that may have two

accounts or one account?

Or just say, as long as you guys have one or more TPT account, why not join

that team? You know, I think that could be kind of a cool thing. So if you have

five, it doesn't matter. If you have one, it doesn't matter.

Please just know that's something I want to talk about because I am, as you know,

I want to create the best software at the least amount of price, but I just

want to hit as many people as possible and have the quality behind it.

I also want to acknowledge that this...

First update, as I've seen in others, it's really good, but there are some

flaws in it. And I apologize for that. When I first used this myself, guys, I

had no error messages on uploading. I tried it hundreds of, not hundreds, to

be realistic. I probably tried it about 15, 20 times, uploading, downloading,

all of it, every configuration. I didn't get any issues. That's why I felt

comfortable sending it out.

I do understand that everyone else has different systems and they can run into

issues. Just know that I'm a backboard here to absorb as much as I can. And the

changes that you want me to make are being made in the background. So know

that when I'm gone this next week, we are working for you to make this even

better. But thank you guys so much for being on this call.

And I look forward to doing many more of these as things develop.

And I might even.

look at doing this as the new release. Let's get on a call again and kind of go

over the new updates. How about that? That'd be kind of cool to do as well.

Thank you.

Thank you. Thank you for having me. Thank you, Justin.

Thank you, Justin. Thank you, Justin.

I appreciate it.

You're welcome, you guys. I really appreciate it.

Thank you, Justin. Thank you.

Thank you, guys. Thank you.

To answer that question, I can't put a specific date on it because I don't know

exactly when my developer is going to get back. I'm going to test it for a day

or two when I get back from vacation, and then I'll release everything

afterwards. It will be done through Gumroad. It has a big email. It'll

literally just be one folder that people download and import, and it'll have all

the changes made to it.

I'm sorry. You're missing the replay for this video. I missed the first part. Oh,

I'm sorry. Yes, guys, what I'm going to do, I'm going to click out of this in a

second. It's going to populate on my screen. It's a two-hour long video. It's

probably going to take an hour or so to upload.

What I will do, the only issue that I might have, and I'm going to be super

real with you guys, Gmail has a 500 email limit per day, and I'm hoping it

didn't block me because I had 700 people that I sent this out to.

If for some reason you don't get an email from me right away, Do know that

over the next couple of days, I will have everyone that's on here.

All I'm going to do is say everyone that just registered for this call, create an

email and send out the link.

It's going to be done as a YouTube unlisted video.

So you can just click a link and rewatch this entire recording as many times you

want. But I will get that sent out as fast as I can after this video.

More than likely, it's going to be later on today or first thing tomorrow

morning.

Beautiful. Love it, guys.

Awesome, brother. Good.

Thanks. Thank you guys so much. Take care. Have a blessed day, everyone.

Thank you.

Safe travels, Justin.

Thank you, brother. I appreciate that. Thank you, Justin.

Appreciate your help.

Welcome.