Original subtitles

‫You guys, welcome back to yet another video now with this video, I'm going to show you how to use

‫the rotate tool, so the rotate tool works similar to the move tool in terms of its functions, but

‫obviously it rotates it off in the sketch up.

‫So to activate the rotate tool, you can press Q on your keyboard to rotate and sketch up all you can

‫click on Go Rotate in your drawing toolbar.

‫Now what I would suggest is that you select the group first and then press the rotate tool or the Kuki

‫on your keyboard to know which group are competent you want to rotate.

‫So if you want to rotate this, you need to first click the base point from where you want to rotate

‫from randomly click somewhere you in space.

‫After you click, you need to click the second part, which is going to be a reference point.

‫So I'm going to click this as a reference point.

‫And I'm simply going to rotate it to 90 degrees.

‫Now you can also rotate and copy like how we have move and copy.

‫So I'm going to click once again at the point of rotation.

‫And then the second would be the reference point, which I want to rotate from.

‫And all of her press control key on my keyboard, it makes her copy so I can make her copy this way

‫as well.

‫And you can also rotate and make multiple number of copies.

‫So I'm going to maybe select this.

‫No.

‫Like most adroit at a certain distance, I won't use the line as the reference, I generally use the

‫line more than the clip as a tool to draw reference lines.

‫But it's your call, so I'm going to give this up to 30 feet.

‫And now we can select this group rescue to activate or rotate through select end point.

‫And then select the reference point you want to rotate from and then you need to click on the second

‫point to place it.

‫And after you place it, before you click any read or press the escape you type in X into and press.

‫And so that makes array of copies of your group.

‫And if you want to adjust the value since 20 doesn't close the loop without pressing anywhere again,

‫I'm just going to type in 23 percent and that would close the loop.

‫That's pretty good.

‫So we created a circle shape.

‫You can also the right stuff know, for example, when a copy this now and rotated from the center last

‫year and then I want to divide by 13.

‫Presenter and that would divide it into a semi circle, equally spaced out.

‫So that's the rotate tool, a pretty handy tool when it comes to rotating stuff in sketch up.

‫I also want to bring your attention that you can rotate with the more tools of fabulous am on my keyboard.

‫And if a hole or any group, you can see that we have these plus points.

‫So with these points, you're you can simply click them and then rotate and sketch up so you don't really

‫need to use the raw data all the time.

‫But in certain stages, you might require to use the 42.

‫You can simply use the Move tool and click on these anchor points to rotate and sketch up.

‫So that is a quick introduction to rotate tool in sketch up.

‫In the next video, we're going to learn how to use components and sketch out.

‫So you guys next.

‫VIDEO Just.