Original subtitles

Guys, welcome back.

And this video will show you how to improve the order, get drunk and to sketch up and also set up a

project before we start modeling and renting out of Prime.

So first thing you need to do is select the right units when you open sketch up, I've selected architectural

mm and I would be working with MM for that as the course.

Now, if you're more comfortable with inches, you can select inches as well.

So I'm going to select architectural mm.

All right, so this is how sketchbooks you'll be seeing the various toolbars if you install the video

correctly and the Flex tool as well.

And we have meetings in the house who the new 0.4 sketch.

So let me read you did.

And what I do is I'll purge the materials because if I go to home, you're.

What if I go to materials and click on the home button, you can see that this these materials remain,

which is part of the origins of that.

So just go to windows modeling for.

And go to statistics and click on birds and used and all the materials go of it.

Subtitled by -♪ online-courses.club ♪- We compress knowledge for you! https://t.me/joinchat/ailxpXoW3JVjYzQ1

Well, it's an all you can import are cat blowing into SketchUp, so go to file import.

It's what they've done is I had the main file, which is apartment project, and then I've sort of separated

out the walls.

The external was the internal walls and the furniture.

It's a fairly simple process to do not get.

If you don't use AutoCAD, you can use any other CAD software as well.

Not since this is a setup course.

I will not be doing that, but you can use the existing files from this exercise files folder so we

can start with importing external walls for select external walls and click on import.

So these are the external ones.

Let me just check the other dimension.

So I'm going to use a tape measure tool, and now you can see that it comes in exactly at 160 mm.

Now, sometimes it may not come in the right skill.

In that case, you can enter this group.

And then you can use the tape measure to suppress D and then you need to press control so you can see

that it changes from the create guide more to the measurement with the measure more.

Now you can change the scale of this drawing.

Let's say you want to change this from one 16mm.

200M and then you need to just measure that once, click one and click the second time and then type

in your rally, which is going to be a presenter.

The number of applicants, you can see that the entire.

CAD drawing changes and no, the walls that 100m.

It's the same four inches as well, so if I press control and then change this to, let's say, six

inches, you can type in six inches and press enter and then you can scale it back again.

So now it's back to six inches.