1
00:00:17,667 --> 00:00:18,517
<i>- My name is tim huff.</i>

2
00:00:18,594 --> 00:00:20,577
I'm 59 years old.

3
00:00:20,579 --> 00:00:22,579
<i>I've been smithing
for about ten years.</i>

4
00:00:22,581 --> 00:00:25,082
<i>My grandfather was
a diesel mechanic.</i>

5
00:00:25,084 --> 00:00:26,674
One day, we were sitting around,

6
00:00:26,694 --> 00:00:28,510
And he goes, "you know,
I need to make myself a knife."

7
00:00:28,529 --> 00:00:30,415
And I was like, "gosh, grandpa,
how do you make a knife?"

8
00:00:30,439 --> 00:00:31,958
And he goes, "well,
this is how you do it."

9
00:00:31,982 --> 00:00:33,181
He brought out his old torch

10
00:00:33,259 --> 00:00:35,259
And we actually made a knife
out of a fender.

11
00:00:37,263 --> 00:00:40,280
- My name is paul rasp.
I'm 42 years old.

12
00:00:40,398 --> 00:00:42,115
I'm a part-time knife-maker

13
00:00:42,234 --> 00:00:44,268
<i>And full-time
electrical engineer.</i>

14
00:00:44,270 --> 00:00:47,695
I spent a number of years
working with nasa.

15
00:00:47,715 --> 00:00:50,123
<i>As an engineer,
I understand physics</i>

16
00:00:50,200 --> 00:00:53,960
And a lot of these processes
like heat-treating.

17
00:00:54,037 --> 00:00:56,388
So being an engineer
has definitely made me

18
00:00:56,465 --> 00:00:57,798
A better bladesmith, for sure.

19
00:00:59,727 --> 00:01:02,286
<i>- My name is cody adolphson,
I'm 29 years old,</i>

20
00:01:02,288 --> 00:01:03,928
And I've been bladesmithing
for two years.

21
00:01:05,291 --> 00:01:07,232
I actually contacted
tyler hackbarth,

22
00:01:07,309 --> 00:01:09,184
<i>The winner
of the battle of the branches,</i>

23
00:01:09,236 --> 00:01:10,294
<i>Took a class from him,</i>

24
00:01:10,296 --> 00:01:12,479
<i>And he taught me how to do this.</i>

25
00:01:12,597 --> 00:01:14,367
The craft is so uncommon
in north dakota,

26
00:01:14,391 --> 00:01:16,151
I had to go to wisconsin
to learn from tyler.

27
00:01:18,228 --> 00:01:20,654
- My name is gari jimenez,
I'm 23 years old,

28
00:01:20,730 --> 00:01:23,898
And I've been a full-time
bladesmith for five years.

29
00:01:23,976 --> 00:01:25,696
<i>I'm literally
just chaos incarnate</i>

30
00:01:25,735 --> 00:01:29,237
Whenever I'm working in
the workshop with my friends.

31
00:01:29,315 --> 00:01:30,716
<i>The blacksmithing
and bladesmithing community</i>

32
00:01:30,740 --> 00:01:33,483
In general, we're all
just a bunch of nerds.

33
00:01:35,212 --> 00:01:37,745
- Bladesmiths,
welcome to the forge.

34
00:01:37,765 --> 00:01:39,818
Now, gentlemen, the four of you
have been chosen

35
00:01:39,842 --> 00:01:42,917
To take part in the ultimate
bladesmithing competition.

36
00:01:42,995 --> 00:01:45,031
Now, we've got three rounds,
and at the end of each one,

37
00:01:45,055 --> 00:01:47,013
There will be an elimination.

38
00:01:47,090 --> 00:01:48,493
Now, all the pertinent
decisions will be made

39
00:01:48,517 --> 00:01:50,925
By the esteemed judges
sitting behind me.

40
00:01:51,003 --> 00:01:52,405
They're the ones who will decide

41
00:01:52,429 --> 00:01:54,149
Which one of you is
gonna be leaving here

42
00:01:54,173 --> 00:01:55,741
With the title
of "forged in fire" champion

43
00:01:55,765 --> 00:01:58,525
And a check for $10,000.

44
00:01:58,602 --> 00:02:00,010
So I'm sure you're ready
to get the fires going,

45
00:02:00,012 --> 00:02:01,194
So let's get into it.

46
00:02:01,271 --> 00:02:03,013
Bladesmiths, on your anvils,
there's a cloth.

47
00:02:03,015 --> 00:02:04,348
Go ahead and remove that for me.

48
00:02:06,776 --> 00:02:09,461
What you're each looking at
are two small cube canisters

49
00:02:09,538 --> 00:02:12,189
And two shots
of high-carbon steel.

50
00:02:12,216 --> 00:02:15,192
Now, your task
is to make not one,

51
00:02:15,261 --> 00:02:17,010
But two matching knives.

52
00:02:17,129 --> 00:02:18,362
<i>- Here we go.</i>

53
00:02:18,364 --> 00:02:20,955
<i>Making two knives
in three hours,</i>

54
00:02:21,033 --> 00:02:22,790
<i>We're making canister damascus.</i>

55
00:02:22,852 --> 00:02:24,718
This sparks anxiety.

56
00:02:24,794 --> 00:02:26,206
- Now, bladesmiths,
you need to make

57
00:02:26,230 --> 00:02:28,129
Two matching
canister damascus knives

58
00:02:28,149 --> 00:02:29,631
<i>In your signature style</i>

59
00:02:29,650 --> 00:02:31,375
<i>That fall within
the following parameters.</i>

60
00:02:31,377 --> 00:02:32,778
<i>Your blade lengths
need to measure</i>

61
00:02:32,802 --> 00:02:34,561
<i>Between 7 and 9 inches.</i>

62
00:02:34,679 --> 00:02:35,879
Now, those of you who join us

63
00:02:35,881 --> 00:02:37,214
In the second round
of this competition,

64
00:02:37,216 --> 00:02:38,526
You will add handles
to those blades,

65
00:02:38,550 --> 00:02:40,642
Turning them
into fully-functioning weapons.

66
00:02:40,661 --> 00:02:42,496
I will then ask you to turn
them over to the judges,

67
00:02:42,520 --> 00:02:44,571
And they will check
for strength and durability

68
00:02:44,689 --> 00:02:47,224
In an oil drum stab and chop.

69
00:02:47,226 --> 00:02:47,908
And then check
your edge retention

70
00:02:48,043 --> 00:02:49,559
And your sharpness

71
00:02:49,561 --> 00:02:51,653
In a punching bag
stab and slice.

72
00:02:51,672 --> 00:02:54,058
All right, bladesmiths, we have
three hours on the clock.

73
00:02:54,082 --> 00:02:55,415
So good luck. Stay sharp.

74
00:02:55,492 --> 00:02:57,158
Your time starts now.

75
00:03:00,739 --> 00:03:03,590
Two canister blades,
not something we see every day.

76
00:03:03,667 --> 00:03:05,570
- Yeah, the key to this
is gonna be multitasking.

77
00:03:05,594 --> 00:03:07,928
Personally,
I'd fix up one canister,

78
00:03:08,063 --> 00:03:09,746
Get it in the fire,

79
00:03:09,748 --> 00:03:11,525
While that heated,
worry about the other canister.

80
00:03:11,549 --> 00:03:14,267
- And each of those cans
is more than enough steel

81
00:03:14,344 --> 00:03:15,919
For a 7-to 9-inch blade, easily.

82
00:03:15,921 --> 00:03:16,844
- Oh, my god, 16-inch blade.

83
00:03:16,906 --> 00:03:18,939
- Easily.
- Yeah.

84
00:03:19,015 --> 00:03:21,533
<i>- I generally make a knife
one a month.</i>

85
00:03:21,610 --> 00:03:23,911
I gotta make two knives
in three hours.

86
00:03:24,029 --> 00:03:25,429
This is insane.

87
00:03:26,615 --> 00:03:28,098
<i>My plan for this challenge is,</i>

88
00:03:28,125 --> 00:03:29,190
<i>I'm gonna mix half and half.</i>

89
00:03:29,210 --> 00:03:30,542
<i>I think if I do that,</i>

90
00:03:30,619 --> 00:03:33,545
I can maybe keep the patterns
as close as I can.

91
00:03:33,622 --> 00:03:35,105
<i>I want to make sure that I get</i>

92
00:03:35,107 --> 00:03:36,584
<i>A full weld all the way around,</i>

93
00:03:36,608 --> 00:03:38,177
<i>But I'll leave
a little pinhole in there</i>

94
00:03:38,201 --> 00:03:40,113
<i>Because if we don't,
then the pressure inside,</i>

95
00:03:40,137 --> 00:03:41,111
<i>It'll pop the top off.</i>

96
00:03:41,138 --> 00:03:43,055
That's not a good thing.

97
00:03:43,131 --> 00:03:44,948
<i>I'm gonna put them both in
at the same time.</i>

98
00:03:44,950 --> 00:03:46,800
So I can pull one off, work it,

99
00:03:46,876 --> 00:03:50,229
So I'm kind of always
working something all the time.

100
00:03:51,640 --> 00:03:53,381
- Okay.

101
00:03:53,459 --> 00:03:55,400
<i>I'm confident
I can get one canister done.</i>

102
00:03:55,477 --> 00:03:58,403
Two canisters,
that's another story.

103
00:03:58,480 --> 00:04:00,814
- Cody's cleaning the inside
of the can with the acetone.

104
00:04:00,890 --> 00:04:02,460
That's not something I see
every day.

105
00:04:02,484 --> 00:04:03,800
- Good idea
'cause if you're not gonna

106
00:04:03,802 --> 00:04:05,819
Peel that can off,
then you want that as clean

107
00:04:05,895 --> 00:04:08,413
As the rest of the material
that's going in there.

108
00:04:08,490 --> 00:04:10,635
<i>- I put all the ball bearings
in one canister</i>

109
00:04:10,659 --> 00:04:12,476
<i>And put all the fishhooks
in the other.</i>

110
00:04:12,478 --> 00:04:14,478
<i>I figured
if they're all the same,</i>

111
00:04:14,480 --> 00:04:15,974
They'd probably go in
a little bit easier

112
00:04:15,998 --> 00:04:18,406
Than trying to mix-match 'em.

113
00:04:18,484 --> 00:04:19,760
<i>But you'll definitely be able
to tell</i>

114
00:04:19,784 --> 00:04:20,812
The ball bearings were in one

115
00:04:20,836 --> 00:04:23,077
And fishhooks were in the other.

116
00:04:23,155 --> 00:04:25,275
It's time to throw them
in the forge and get them hot.

117
00:04:26,124 --> 00:04:27,582
- Here we go.

118
00:04:27,659 --> 00:04:29,659
<i>I'm not really a fan
of canister damascus.</i>

119
00:04:29,661 --> 00:04:32,604
It's frustrating
because if you have a delam,

120
00:04:32,681 --> 00:04:36,090
By the time you already see it,
it's too late.

121
00:04:36,151 --> 00:04:37,759
<i>While packing these cans,</i>

122
00:04:37,778 --> 00:04:39,664
<i>I'm gonna make sure that
the powder really settles in</i>

123
00:04:39,688 --> 00:04:41,780
Because I do not want
voids in my steel.

124
00:04:43,675 --> 00:04:45,503
- Gari doesn't take the time
to clean off his metals.

125
00:04:45,527 --> 00:04:47,127
He just went
straight to the welder.

126
00:04:47,162 --> 00:04:48,345
- That's a big risk.

127
00:04:48,347 --> 00:04:50,196
- Oh, yeah.
- I'm optimistic.

128
00:04:50,273 --> 00:04:51,515
We're working. We're doing it.

129
00:04:53,869 --> 00:04:57,111
<i>- I regularly make
identical knives in my forge,</i>

130
00:04:57,189 --> 00:04:59,131
So the thought
of making two of them

131
00:04:59,207 --> 00:05:01,858
At the same time
is not an issue.

132
00:05:01,860 --> 00:05:04,711
I have the cans packed
and I grind down the caps

133
00:05:04,788 --> 00:05:06,972
Because if you just
weld the cap to the outside,

134
00:05:07,049 --> 00:05:09,549
There's a danger
that the cap pops off

135
00:05:09,667 --> 00:05:11,535
<i>When you start
compressing material.</i>

136
00:05:11,537 --> 00:05:14,204
- Some smiths like
to have that canister lid

137
00:05:14,206 --> 00:05:16,540
Fit down inside the canister.

138
00:05:16,542 --> 00:05:18,542
That way, when you go
to that first press,

139
00:05:18,544 --> 00:05:21,378
It doesn't balloon out
and blow that well.

140
00:05:21,380 --> 00:05:22,970
<i>- I think it's worth it
'cause I know</i>

141
00:05:22,990 --> 00:05:25,715
I'll pack them tightly
without any voids.

142
00:05:25,717 --> 00:05:29,553
- Bladesmiths, you have
2 hours and 30 minutes left.

143
00:05:29,555 --> 00:05:30,978
<i>- If you don't have the canister</i>

144
00:05:30,998 --> 00:05:32,556
<i>At the right heat,
then you won't get a weld.</i>

145
00:05:32,558 --> 00:05:34,666
So you want to get it
to that temperature,

146
00:05:34,743 --> 00:05:36,479
Let it go for another five,
ten minutes.

147
00:05:36,503 --> 00:05:37,985
<i>That's critical.</i>

148
00:05:38,063 --> 00:05:39,298
- What color
are they looking for

149
00:05:39,322 --> 00:05:41,231
Before they go
to that first initial weld?

150
00:05:41,233 --> 00:05:44,158
- Oh, a melting stick of butter.

151
00:05:44,236 --> 00:05:46,511
- Give it a nice kiss,
all four sides.

152
00:05:46,630 --> 00:05:48,996
- Tim's got the color you want.

153
00:05:49,074 --> 00:05:50,485
- When I take it to the anvil
and it gives

154
00:05:50,509 --> 00:05:52,392
That nice solid pink,
you're good.

155
00:05:55,004 --> 00:05:56,844
So now I'm gonna jump
on the second one

156
00:05:56,881 --> 00:05:58,098
And do the same thing.

157
00:06:00,027 --> 00:06:01,251
<i>- I've always been told if...</i>

158
00:06:01,253 --> 00:06:02,102
<i>Once you think it's hot enough,</i>

159
00:06:02,237 --> 00:06:04,846
Wait five minutes.

160
00:06:04,865 --> 00:06:07,185
<i>You really need to make sure
you got good, even heat</i>

161
00:06:07,259 --> 00:06:08,425
<i>Throughout the whole piece</i>

162
00:06:08,427 --> 00:06:09,921
Because you're coming in
from all sides.

163
00:06:09,945 --> 00:06:11,545
You're not just
coming in on top.

164
00:06:12,931 --> 00:06:14,598
<i>A bad weld, you could
pop open the canister</i>

165
00:06:14,600 --> 00:06:16,600
<i>And your components
could fall out.</i>

166
00:06:16,602 --> 00:06:18,785
And luckily,
that didn't happen with me.

167
00:06:18,903 --> 00:06:20,604
- Cody's temperature
looked great too,

168
00:06:20,606 --> 00:06:22,606
And he was very gentle
on that first press,

169
00:06:22,608 --> 00:06:24,216
Which I like to see.

170
00:06:24,292 --> 00:06:26,960
<i>- Doing this with one can
is difficult enough.</i>

171
00:06:27,036 --> 00:06:28,703
<i>I'm pleasantly surprised.</i>

172
00:06:28,780 --> 00:06:30,450
<i>With any canister,
there's a little bit of luck</i>

173
00:06:30,474 --> 00:06:32,449
In every single one you do.

174
00:06:32,451 --> 00:06:34,284
Don't even know
where I am right now.

175
00:06:34,311 --> 00:06:35,560
- Going to the press!

176
00:06:35,679 --> 00:06:37,804
My first weld
is the fishhook billet.

177
00:06:37,881 --> 00:06:39,639
<i>Turns out great.</i>

178
00:06:39,757 --> 00:06:43,050
Go to my second billet,
there's four competitors

179
00:06:43,128 --> 00:06:46,071
And two presses,
and I'm impatient.

180
00:06:46,189 --> 00:06:48,131
Big blue!

181
00:06:48,133 --> 00:06:50,409
- Gari went straight
to big blue.

182
00:06:50,569 --> 00:06:52,135
- Is it too early for that?

183
00:06:52,137 --> 00:06:54,487
- Ideally, you get that
compression in four directions

184
00:06:54,564 --> 00:06:56,724
When you're on the press,
whereas big blue is going

185
00:06:56,774 --> 00:06:59,251
To smash things out
and balloon it to the side.

186
00:06:59,369 --> 00:07:03,980
- The texture that I'm feeling
is not solid.

187
00:07:03,982 --> 00:07:07,909
If this doesn't weld up,
I could have warping,

188
00:07:07,986 --> 00:07:10,654
Snapping, delaminations.

189
00:07:10,656 --> 00:07:13,339
<i>So I decide
to get this thing cut open</i>

190
00:07:13,416 --> 00:07:15,296
To make sure that there's
not voids in my steel.

191
00:07:17,554 --> 00:07:18,662
Yeah, that's what I want to see.

192
00:07:18,664 --> 00:07:21,331
I'm relieved
because it looks good.

193
00:07:21,333 --> 00:07:23,850
<i>Now I can
start drawing out the steel.</i>

194
00:07:23,927 --> 00:07:25,404
All right,
that looks good to me.

195
00:07:25,428 --> 00:07:28,688
- Bladesmiths,
you have two hours remaining.

196
00:07:29,691 --> 00:07:31,076
- Paul switched out
the squaring dies

197
00:07:31,100 --> 00:07:32,676
For the drawing dies
on the press.

198
00:07:32,678 --> 00:07:34,786
Now he's starting
to pull out his billet.

199
00:07:34,863 --> 00:07:37,514
- But look how cold
that piece of steel is no.

200
00:07:37,516 --> 00:07:39,791
- All you're doing
is putting stress in the steel,

201
00:07:39,868 --> 00:07:42,352
If you're even forge-welding
anything that's in there.

202
00:07:42,354 --> 00:07:44,704
<i>- The only concern
that I really have</i>

203
00:07:44,781 --> 00:07:47,691
Is being a dummy
and focusing on one knife

204
00:07:47,693 --> 00:07:50,469
And forgetting the other one
in the forge.

205
00:07:50,587 --> 00:07:53,805
Everything looks nice.
Now I can start shaping it.

206
00:07:57,126 --> 00:07:58,326
<i>- Metal's moving good for me.</i>

207
00:07:58,370 --> 00:08:00,370
I'm gonna start
hammering in the tips.

208
00:08:00,372 --> 00:08:03,297
<i>I'm making, essentially,
a drop point camp knife.</i>

209
00:08:03,375 --> 00:08:05,299
Good for stabbing,
and it should be really good

210
00:08:05,402 --> 00:08:07,152
For the chopping as well.

211
00:08:07,229 --> 00:08:08,948
<i>Right now, I've got
to finish my points,</i>

212
00:08:08,972 --> 00:08:10,550
Get my through tang ready to go,

213
00:08:10,574 --> 00:08:11,823
And start grinding this puppy.

214
00:08:13,276 --> 00:08:14,901
<i>- Steel's moving good.</i>

215
00:08:14,978 --> 00:08:16,789
Gonna start forming in my tips
once I get them

216
00:08:16,813 --> 00:08:19,072
Drawn out long enough.

217
00:08:19,148 --> 00:08:21,391
- He seems very comfortable
with the power tools.

218
00:08:21,393 --> 00:08:23,221
- You always got to watch out
for the quiet guys.

219
00:08:23,245 --> 00:08:26,153
They tend to sneak up on us
during these competitions.

220
00:08:26,173 --> 00:08:29,916
<i>- It's a really
labor-intensive deal.</i>

221
00:08:29,993 --> 00:08:31,613
These blades need to match,
so I need to make sure

222
00:08:31,637 --> 00:08:33,494
I work them the same.

223
00:08:33,597 --> 00:08:34,846
- Okay, this one's behaving.

224
00:08:34,923 --> 00:08:37,832
My first billet,
it's not super happy with me,

225
00:08:37,909 --> 00:08:39,226
<i>But it's working okay.</i>

226
00:08:39,344 --> 00:08:40,344
Press!

227
00:08:40,378 --> 00:08:42,078
But my second billet...

228
00:08:42,080 --> 00:08:46,266
- Ooh, gari,
this one's not looking so good.

229
00:08:46,401 --> 00:08:48,527
<i>- I notice a crack.</i>

230
00:08:48,645 --> 00:08:49,510
- You see that seam
right in the middle?

231
00:08:49,613 --> 00:08:50,754
- Yeah.

232
00:08:50,756 --> 00:08:52,088
- I think he's got a section

233
00:08:52,090 --> 00:08:54,348
Where the mild steel
didn't weld to the guts.

234
00:08:54,409 --> 00:08:56,350
- I am an upsetty spaghetti.

235
00:08:56,428 --> 00:08:57,997
Just gotta keep fighting
this one.

236
00:08:58,021 --> 00:09:00,354
<i>If I leave this crack in here
without filling it,</i>

237
00:09:00,457 --> 00:09:02,932
I will get sent home.

238
00:09:02,934 --> 00:09:05,602
<i>I don't think I can start ovr
at this point in time.</i>

239
00:09:05,604 --> 00:09:07,361
- Things are not looking good.

240
00:09:07,439 --> 00:09:08,933
<i>- The heat's getting to me,
the stress is getting to me,</i>

241
00:09:08,957 --> 00:09:10,048
<i>The time is getting to me.</i>

242
00:09:11,777 --> 00:09:14,502
I've got to figure it out
as fast as I can.

243
00:09:14,555 --> 00:09:15,804
Well, that sucks.

244
00:09:19,685 --> 00:09:20,685
- If he's got delams,

245
00:09:20,719 --> 00:09:22,710
This is the time
to weld that up.

246
00:09:22,788 --> 00:09:24,523
- I keep looking at the clock
and I keep looking at my steel.

247
00:09:24,547 --> 00:09:26,213
Oh, where are you,
you little sucker?

248
00:09:26,233 --> 00:09:27,732
There it is. Welding!

249
00:09:27,809 --> 00:09:29,437
I take it to the welder
and just zap

250
00:09:29,461 --> 00:09:30,902
<i>And fill those voids in.</i>

251
00:09:30,979 --> 00:09:33,572
<i>If I don't grind
these welds off eventually,</i>

252
00:09:33,690 --> 00:09:36,908
I may have mild steel
contamination on my edge,

253
00:09:36,985 --> 00:09:38,392
Which will get me sent home.

254
00:09:40,472 --> 00:09:42,563
<i>It's far
from a perfect situation,</i>

255
00:09:42,583 --> 00:09:45,158
But I can start making the tang.

256
00:09:45,234 --> 00:09:48,920
- Bladesmiths, we are down
to the final 60 minutes.

257
00:09:50,832 --> 00:09:53,817
- Two knives are on the go
at all times.

258
00:09:53,819 --> 00:09:55,985
<i>I get the tangs shaped.</i>

259
00:09:55,987 --> 00:09:58,338
The next step is,
I need to get my tips put in.

260
00:09:59,683 --> 00:10:01,433
I take one billet,

261
00:10:01,551 --> 00:10:03,101
Get the tip
exactly how I want it,

262
00:10:03,178 --> 00:10:04,603
<i>And scribe it.</i>

263
00:10:04,721 --> 00:10:07,664
Now I can guarantee
that my knives are the same.

264
00:10:07,666 --> 00:10:09,477
<i>I am feeling very confident
at this point.</i>

265
00:10:09,501 --> 00:10:11,776
<i>Now it's time
to make 'em pretty.</i>

266
00:10:13,429 --> 00:10:15,338
<i>- I've got both these blades
to a profile that I like,</i>

267
00:10:15,340 --> 00:10:16,806
<i>So I'm gonna get ready
for a quench.</i>

268
00:10:16,808 --> 00:10:19,100
This is
the make-or-break moment.

269
00:10:19,177 --> 00:10:20,844
Gonna start listening
for tings, cracks.

270
00:10:22,180 --> 00:10:23,955
- Cody has quenched
his first blade.

271
00:10:27,294 --> 00:10:30,019
I see it start to warp,
but it isn't that bad.

272
00:10:30,021 --> 00:10:32,856
I'm pretty sure I can
fix it with a grinder.

273
00:10:32,858 --> 00:10:35,191
- Cody has now quenched
both blades.

274
00:10:35,193 --> 00:10:37,802
- Everything goes
according to plan on that one.

275
00:10:37,921 --> 00:10:39,954
<i>I just can't believe
where I'm at</i>

276
00:10:40,031 --> 00:10:41,806
<i>With the time I have left.</i>

277
00:10:41,883 --> 00:10:46,386
I know I can give the judges
a good set of blades.

278
00:10:47,873 --> 00:10:49,706
- Because these have to be
identical knives,

279
00:10:49,708 --> 00:10:51,035
<i>I'm gonna grab some vice grips
and a c-clamp</i>

280
00:10:51,059 --> 00:10:53,485
And put them together
so when I do my grinds,

281
00:10:53,561 --> 00:10:56,655
<i>I'll be able to make sure
I keep those grinds perfect.</i>

282
00:10:56,773 --> 00:10:58,990
- Tim's got both of his blades
clamped together,

283
00:10:59,067 --> 00:11:00,474
And he's grinding him as one

284
00:11:00,552 --> 00:11:02,254
So he's getting
exactly the same profile.

285
00:11:02,278 --> 00:11:04,070
- Oh, you bet.

286
00:11:04,147 --> 00:11:05,791
<i>- I'm going to spend
a little time thermocycling</i>

287
00:11:05,815 --> 00:11:07,666
<i>Both these blades
because j's here,</i>

288
00:11:07,784 --> 00:11:09,483
<i>He's gonna try
to break them anyway,</i>

289
00:11:09,561 --> 00:11:10,730
<i>So I want to get
a little bit more</i>

290
00:11:10,754 --> 00:11:12,987
Structural integrity
in the blades.

291
00:11:13,064 --> 00:11:15,732
- All right, tim's got
his first blade quenched.

292
00:11:15,759 --> 00:11:17,658
- Boom, it's perfect,
I'm in love.

293
00:11:17,761 --> 00:11:20,403
<i>Grabbed the second blade,</i>

294
00:11:20,405 --> 00:11:22,255
And they went perfectly.

295
00:11:22,331 --> 00:11:24,665
Yes, yes, yes!

296
00:11:24,685 --> 00:11:26,576
<i>Time to get these profiles down,</i>

297
00:11:26,603 --> 00:11:28,411
Get this stuff ready to go.

298
00:11:28,413 --> 00:11:30,149
<i>One of the things
I think that really helps</i>

299
00:11:30,173 --> 00:11:32,173
<i>In being an executive
in a large organization</i>

300
00:11:32,216 --> 00:11:33,599
Is pressure.

301
00:11:33,676 --> 00:11:35,079
<i>I was also
a professional soccer player,</i>

302
00:11:35,103 --> 00:11:36,956
And you're playing
in front of a lot of people,

303
00:11:36,980 --> 00:11:38,846
<i>So you have to have
the confidence</i>

304
00:11:38,924 --> 00:11:41,700
<i>That you can make
those right decisions.</i>

305
00:11:41,860 --> 00:11:43,517
- I don't know
what happened to gari,

306
00:11:43,595 --> 00:11:45,519
He but he has turned
those mass billets

307
00:11:45,597 --> 00:11:47,174
Into what look like blades
right now.

308
00:11:48,950 --> 00:11:51,284
All right, gari's got
his first blade quenched.

309
00:11:51,360 --> 00:11:53,619
- All right,
that looks good to me.

310
00:11:53,696 --> 00:11:55,182
Time to quench
the ugly stepsister.

311
00:11:57,609 --> 00:12:00,201
I don't hear, feel, or see
any tinks, no cracks.

312
00:12:00,278 --> 00:12:02,220
Yeah, okay.

313
00:12:02,297 --> 00:12:05,890
I'm looking at these profiles,
and they're not perfect,

314
00:12:05,967 --> 00:12:08,893
But my main focus is
getting a knife finished.

315
00:12:09,012 --> 00:12:11,712
I don't really have time
to fix these issues.

316
00:12:15,977 --> 00:12:18,478
- All right, paul's in the oil
with one of his blades.

317
00:12:18,596 --> 00:12:20,296
- There it is.

318
00:12:20,298 --> 00:12:22,073
No crazy warps.

319
00:12:22,150 --> 00:12:24,558
- Paul's got two blades
quenched now.

320
00:12:24,636 --> 00:12:26,894
- Let's polish them up
a little bit.

321
00:12:26,913 --> 00:12:28,821
<i>At this point,
whatever is gonna happen</i>

322
00:12:28,898 --> 00:12:31,657
Is gonna happen,
so I'm feeling really good.

323
00:12:31,734 --> 00:12:36,087
- Five, four, three, two, one.

324
00:12:36,164 --> 00:12:37,641
Bladesmiths,
turn off your machines.

325
00:12:37,665 --> 00:12:40,407
Put down your tools.
This round is over.

326
00:12:40,469 --> 00:12:43,152
Well done, guys!

327
00:12:43,154 --> 00:12:45,655
<i>- These are, by far,
not perfect blades,</i>

328
00:12:45,657 --> 00:12:47,581
But with all the trials
and tribulations

329
00:12:47,659 --> 00:12:49,236
That I've been through,
I finished.

330
00:12:51,897 --> 00:12:53,179
- All right, bladesmiths,

331
00:12:53,297 --> 00:12:54,664
In the first round
of this competition,

332
00:12:54,666 --> 00:12:56,499
We asked you to make two blades

333
00:12:56,501 --> 00:12:58,610
From cube canisters,
and from where we're standing,

334
00:12:58,686 --> 00:13:01,187
You guys all performed
extremely well.

335
00:13:01,264 --> 00:13:03,281
But the time has come
for the first critique.

336
00:13:03,358 --> 00:13:05,002
Tim, you're up first.
You ready?

337
00:13:05,026 --> 00:13:07,118
- Yes, sir.
- Please present your work.

338
00:13:10,181 --> 00:13:11,956
<i>- All right, tim,
nice work here.</i>

339
00:13:12,075 --> 00:13:13,850
<i>You know,
grinds are a little off.</i>

340
00:13:13,852 --> 00:13:15,179
<i>Got a little bit of a kick
here and there,</i>

341
00:13:15,203 --> 00:13:16,686
<i>But it's nothing major.</i>

342
00:13:16,688 --> 00:13:20,281
You've got enough meat
on the back to correct that.

343
00:13:20,358 --> 00:13:21,858
You've got one little weird kick

344
00:13:21,860 --> 00:13:23,968
Down here on the edge profile,

345
00:13:24,045 --> 00:13:26,029
But if you happen to move on
to the next round,

346
00:13:26,031 --> 00:13:28,289
That could be corrected.

347
00:13:28,366 --> 00:13:30,308
But overall, nice job.

348
00:13:30,385 --> 00:13:32,035
- Thank you, sir.

349
00:13:32,037 --> 00:13:33,917
- Paul, you're up.
Please present your work.

350
00:13:37,100 --> 00:13:39,876
<i>- All right, paul,
as a matching set,</i>

351
00:13:39,945 --> 00:13:42,636
<i>Your blades are very close.</i>

352
00:13:42,714 --> 00:13:44,449
<i>And I like that you have
fishhooks on one side</i>

353
00:13:44,473 --> 00:13:45,398
And ball bearings.

354
00:13:45,474 --> 00:13:47,325
You've got the yin and yang.

355
00:13:47,402 --> 00:13:50,328
The steel looks solid.
Nice grinds on this.

356
00:13:52,223 --> 00:13:54,223
If you move forward,
just a little cleanup,

357
00:13:54,225 --> 00:13:56,650
But otherwise,
it's got a good feel to it.

358
00:13:56,728 --> 00:13:58,895
Good job.
- Thank you.

359
00:13:58,897 --> 00:14:00,857
- Next we have cody.
Please present your work.

360
00:14:04,327 --> 00:14:06,564
<i>- Cody, you left a good amount
of tang on here.</i>

361
00:14:06,588 --> 00:14:07,904
<i>Your blades are straight.</i>

362
00:14:07,931 --> 00:14:09,848
<i>Your grinds are pretty even too.</i>

363
00:14:10,008 --> 00:14:13,092
Your blades are almost dead-on,

364
00:14:13,210 --> 00:14:16,262
But you've got a small blemish
here and there.

365
00:14:16,339 --> 00:14:18,731
But overall, it was a pleasure
watching you work.

366
00:14:18,850 --> 00:14:21,084
Good job.
- Thank you.

367
00:14:21,086 --> 00:14:23,194
- Gari, you're up.
Please present your work.

368
00:14:25,222 --> 00:14:26,734
<i>- All right, so, gari,
down along the edge,</i>

369
00:14:26,758 --> 00:14:28,700
<i>You got these nicely welded up.</i>

370
00:14:28,776 --> 00:14:32,519
The edge steel looks fine,
but you can still see

371
00:14:32,539 --> 00:14:34,258
Up here on the spine
where there's some...

372
00:14:34,282 --> 00:14:35,856
Like, a ball bearing or two

373
00:14:35,934 --> 00:14:38,710
That are just kind of
not fully welded in,

374
00:14:38,786 --> 00:14:42,046
And then again
on the spine of this blade.

375
00:14:42,123 --> 00:14:43,508
The other thing is,
we kind of have

376
00:14:43,532 --> 00:14:45,049
Two different profiles here.

377
00:14:45,168 --> 00:14:47,552
They're close,
but you have to be careful

378
00:14:47,629 --> 00:14:49,220
'cause they're not that long.

379
00:14:49,297 --> 00:14:51,425
You wouldn't want to lose
any length in these blades.

380
00:14:51,449 --> 00:14:54,375
But good job knocking this out.

381
00:14:54,452 --> 00:14:56,969
- Now, gentlemen, you all have
a ton to be proud of,

382
00:14:57,046 --> 00:14:59,380
But only three of you can
join us in the second round.

383
00:14:59,457 --> 00:15:01,124
Our judges have
discussed your blades.

384
00:15:01,126 --> 00:15:02,753
The bladesmith
leaving the forge is...

385
00:15:05,096 --> 00:15:06,479
Gari.

386
00:15:06,555 --> 00:15:08,292
Unfortunately, your blades
did not make the cut,

387
00:15:08,316 --> 00:15:09,723
And j. Is gonna tell you why.

388
00:15:09,801 --> 00:15:10,742
- All right, gari, you fought

389
00:15:10,818 --> 00:15:12,113
Your way through this challenge,

390
00:15:12,137 --> 00:15:13,986
So you should be
proud of yourself for that.

391
00:15:14,063 --> 00:15:16,563
But your profiles are
a bit off from each other.

392
00:15:16,583 --> 00:15:18,082
<i>And the big thing is,</i>

393
00:15:18,159 --> 00:15:19,303
<i>Those delaminations
bring into question</i>

394
00:15:19,327 --> 00:15:21,644
The structural integrity
inside your blade.

395
00:15:21,646 --> 00:15:23,983
And that would be a lot more
to fix than your competitors.

396
00:15:24,007 --> 00:15:25,114
That's why
we're sending you home.

397
00:15:25,116 --> 00:15:26,816
- Yep.

398
00:15:26,818 --> 00:15:29,243
- Well, gari,
you have zero quit in you, man,

399
00:15:29,320 --> 00:15:31,298
And we want to say thank you
for coming out here.

400
00:15:31,322 --> 00:15:33,025
But, unfortunately, your time
in this competition has ended.

401
00:15:33,049 --> 00:15:34,824
I'm gonna have to ask you
to please surrender your blades

402
00:15:34,826 --> 00:15:36,750
And step off the forge floor.

403
00:15:36,853 --> 00:15:38,937
Thank you for coming out.

404
00:15:39,013 --> 00:15:40,474
<i>- I'm a little frustrated
with myself,</i>

405
00:15:40,498 --> 00:15:43,182
But also, I'm proud of myself
that I didn't give up.

406
00:15:43,259 --> 00:15:45,059
<i>I came in to hang out
and have fun</i>

407
00:15:45,136 --> 00:15:47,428
And meet new people 'cause
we're a whole bunch of nerds

408
00:15:47,505 --> 00:15:49,083
Who like sharp,
pointy, stabby things.

409
00:15:51,693 --> 00:15:52,858
- Gentlemen, congratulations.

410
00:15:52,935 --> 00:15:54,287
The three of you
will be joining us

411
00:15:54,311 --> 00:15:56,015
In the second round
of this competition.

412
00:15:56,039 --> 00:15:57,196
You're gonna have to fix

413
00:15:57,273 --> 00:15:58,681
Any issues that the judges
brought forward,

414
00:15:58,683 --> 00:16:00,293
As well as add handles
to your blades,

415
00:16:00,317 --> 00:16:02,126
Turning them
into fully-functioning weapons.

416
00:16:02,203 --> 00:16:04,020
By the end of this second round,

417
00:16:04,022 --> 00:16:05,683
Both of your blades
will have to have

418
00:16:05,707 --> 00:16:08,157
A functioning guard
and matching handles.

419
00:16:08,159 --> 00:16:10,026
<i>Oh.</i>

420
00:16:10,028 --> 00:16:14,955
Doing two guards and handles
is a lot in two hours.

421
00:16:14,975 --> 00:16:16,495
- At the end
of the second round,

422
00:16:16,534 --> 00:16:18,478
You're gonna turn your blades
back over to the judges.

423
00:16:18,502 --> 00:16:20,203
They're gonna check
for strength and durability

424
00:16:20,205 --> 00:16:22,555
In an oil drum stab and chop

425
00:16:22,631 --> 00:16:23,556
And then check
your edge retention

426
00:16:23,650 --> 00:16:25,041
And your sharpness

427
00:16:25,068 --> 00:16:27,318
In a punching bag
stab and slice.

428
00:16:27,395 --> 00:16:29,081
All right, gentlemen,
you have two hours

429
00:16:29,105 --> 00:16:30,132
To complete your blades
before testing,

430
00:16:30,156 --> 00:16:32,215
And that time starts now.

431
00:16:34,643 --> 00:16:36,310
- Off to the races.

432
00:16:36,387 --> 00:16:38,888
- One of the things I like
about having challenges

433
00:16:38,890 --> 00:16:40,389
Where they have to put
the guard is,

434
00:16:40,391 --> 00:16:44,651
It truly tests
your fit and finish skills.

435
00:16:44,671 --> 00:16:47,031
<i>- I am very fortunate that
when doug looked at my blades,</i>

436
00:16:47,165 --> 00:16:49,340
They were good to go.

437
00:16:49,417 --> 00:16:52,418
<i>The first thing I do, I grab
myself a stainless steel pen,</i>

438
00:16:52,536 --> 00:16:54,237
G-10, and brass.

439
00:16:55,423 --> 00:16:57,331
<i>When I'm cutting the brass,</i>

440
00:16:57,408 --> 00:16:59,592
<i>This thing's twice as wide
as it needs to be.</i>

441
00:16:59,668 --> 00:17:01,855
I'm just gonna let that thing
cut curved in the middle,

442
00:17:01,879 --> 00:17:03,003
<i>Run to the drill press,</i>

443
00:17:03,023 --> 00:17:05,672
<i>Pop some holes, hit it,</i>

444
00:17:05,692 --> 00:17:08,084
<i>Break it in half.</i>

445
00:17:08,086 --> 00:17:09,861
<i>Getting one on
and then realizing</i>

446
00:17:09,937 --> 00:17:12,421
There's another one
sitting there is not very fun.

447
00:17:14,259 --> 00:17:15,494
- Paul's at
that frustration point

448
00:17:15,518 --> 00:17:17,017
Where that guard is, like,

449
00:17:17,095 --> 00:17:18,870
Just gonna need
a little bit more

450
00:17:18,946 --> 00:17:21,280
And then a little bit more
to get that good fit.

451
00:17:21,398 --> 00:17:22,935
<i>- Luckily, I didn't make
too many mistakes</i>

452
00:17:22,959 --> 00:17:24,024
<i>'cause I got it done.</i>

453
00:17:26,921 --> 00:17:28,862
<i>- Micarta's tough to work,</i>

454
00:17:28,940 --> 00:17:31,382
But it's a good, durable,
hard material

455
00:17:31,459 --> 00:17:34,627
That's gonna stand up
to the tests.

456
00:17:34,703 --> 00:17:36,703
<i>So I'm going back and forth
with the file and the dremel.</i>

457
00:17:36,723 --> 00:17:41,542
- Cody's trying to just dial in
that tang hole in his guard.

458
00:17:41,619 --> 00:17:43,544
<i>- It's not really sitting
how I want it to sit,</i>

459
00:17:43,563 --> 00:17:47,714
So I make the decision
to go and weld my guard on.

460
00:17:47,792 --> 00:17:48,919
- So what could happen
by welding

461
00:17:48,943 --> 00:17:50,293
Onto the tang at this point?

462
00:17:50,295 --> 00:17:52,052
- You're completely
de-tempering it.

463
00:17:52,072 --> 00:17:53,646
- This guard
doesn't look pretty.

464
00:17:53,722 --> 00:17:55,189
It's ugly, but it's on there,

465
00:17:55,241 --> 00:17:56,841
And I gotta keep moving forward.

466
00:17:58,303 --> 00:18:00,411
- Bladesmiths,
30 minutes have elapsed.

467
00:18:00,488 --> 00:18:02,413
You have 90 minutes remaining.

468
00:18:02,490 --> 00:18:04,323
- Oh, my god.

469
00:18:04,441 --> 00:18:07,085
<i>I made the decision to go
with a simple flat guard,</i>

470
00:18:07,245 --> 00:18:08,828
And I'm gonna weld it on.

471
00:18:08,946 --> 00:18:10,254
<i>I'm excited. I'm happy.</i>

472
00:18:10,373 --> 00:18:12,739
I've got my first guard on.
I look down.

473
00:18:12,759 --> 00:18:14,926
. Damn it.
That's upside down.

474
00:18:15,044 --> 00:18:16,135
I welded it on upside down.

475
00:18:17,989 --> 00:18:19,171
I feel like a complete noob.

476
00:18:19,248 --> 00:18:20,968
Pop off. Pop off. Pop off.
Oh, my god.

477
00:18:20,992 --> 00:18:23,768
- That's gotta be nerve-racking
when you look at the clock.

478
00:18:23,845 --> 00:18:27,296
'cause, "I gotta finish
this blade and another one."

479
00:18:27,298 --> 00:18:28,733
<i>- As I'm welding
the second time,</i>

480
00:18:28,757 --> 00:18:30,274
<i>I made sure to get it right,</i>

481
00:18:30,351 --> 00:18:31,736
<i>And it's nice and sturdy
on there.</i>

482
00:18:31,760 --> 00:18:33,613
<i>But I'm starting to get
that sinking feeling</i>

483
00:18:33,637 --> 00:18:35,446
That I am not gonna
finish this thing.

484
00:18:37,433 --> 00:18:39,220
<i>- So the guards fit,
so I draw the tang</i>

485
00:18:39,244 --> 00:18:41,527
<i>On my handle material.</i>

486
00:18:41,645 --> 00:18:44,697
<i>I make my holes
at least the width of my tang</i>

487
00:18:44,773 --> 00:18:46,773
<i>And when I fit
that last piece up,</i>

488
00:18:46,793 --> 00:18:49,535
<i>I see the gap, 3/4 of an inc.</i>

489
00:18:49,612 --> 00:18:52,204
To hell with it.
Let's put a spacer in there.

490
00:18:52,323 --> 00:18:54,948
<i>So I go
with a piece of hardwood.</i>

491
00:18:55,026 --> 00:18:56,709
<i>It drills out
in just 30 seconds.</i>

492
00:18:56,785 --> 00:18:59,119
Slap it on there, and now
I have a handle that fits.

493
00:18:59,139 --> 00:19:00,805
<i>The handle's a dog turd.</i>

494
00:19:00,882 --> 00:19:04,958
There's really no good feeling
until the second handle is fi.

495
00:19:05,036 --> 00:19:07,311
- This isn't any fun.
- No, this sucks.

496
00:19:07,388 --> 00:19:09,313
This is worse
than making the knife.

497
00:19:09,390 --> 00:19:12,375
- Bladesmiths, you have
45 minutes left before testing.

498
00:19:13,895 --> 00:19:15,969
- Thankfully,
I have my holes drilled,

499
00:19:16,047 --> 00:19:17,380
<i>I start tapping this pin in...</i>

500
00:19:17,382 --> 00:19:19,106
Oh, no.
And then it bends.

501
00:19:20,885 --> 00:19:23,052
- One of the issues
with putting a pin in

502
00:19:23,054 --> 00:19:25,646
The way cody did is,
it could get locked up

503
00:19:25,665 --> 00:19:28,724
And jammed in there and cause
a nightmare to get it out.

504
00:19:28,726 --> 00:19:31,410
<i>- I can't get it to go in.
I can't get it out.</i>

505
00:19:31,487 --> 00:19:32,819
- Things aren't lined up,

506
00:19:32,839 --> 00:19:34,839
Because it shouldn't be
that much resistance.

507
00:19:34,916 --> 00:19:36,365
<i>- They need a pin
in this handle,</i>

508
00:19:36,367 --> 00:19:37,769
Or they're not gonna test
my knife.

509
00:19:42,907 --> 00:19:45,052
- Cody was flying through this
competition the first round.

510
00:19:45,076 --> 00:19:47,185
He has just hit
a complete brick wall.

511
00:19:47,345 --> 00:19:49,412
<i>- So I decide
to cut this pin off,</i>

512
00:19:49,414 --> 00:19:51,914
Go and drill
another hole in my tang

513
00:19:51,916 --> 00:19:54,934
Just to make sure
I have a pin in my tang.

514
00:19:55,010 --> 00:19:57,344
And hopefully the epoxy
will hold this in.

515
00:19:57,422 --> 00:19:59,422
- Oh, man, I wish he'd put
more epoxy in there.

516
00:19:59,424 --> 00:20:00,514
Ugh.

517
00:20:00,591 --> 00:20:03,016
- Round two
is really kicking my ass.

518
00:20:03,077 --> 00:20:05,369
- You have 20 minutes left!

519
00:20:05,488 --> 00:20:07,057
<i>- My handles
were glued together.</i>

520
00:20:07,081 --> 00:20:08,447
Now they're just big blocks.

521
00:20:08,565 --> 00:20:11,692
<i>There's a ton of material.</i>

522
00:20:11,711 --> 00:20:14,437
<i>I know a lot of guys come out
and they get kicked off</i>

523
00:20:14,439 --> 00:20:17,273
'cause the handles are blocky
or there's sharp bits

524
00:20:17,275 --> 00:20:19,442
<i>Or cut somebody or something.</i>

525
00:20:19,444 --> 00:20:20,771
- Paul's done
the flat... flattened,

526
00:20:20,795 --> 00:20:23,112
But he's using
that 2-inch wheel at the top

527
00:20:23,139 --> 00:20:25,372
To contour that transition

528
00:20:25,450 --> 00:20:27,610
Where he's got that spacer,
which is a good thing.

529
00:20:27,635 --> 00:20:31,395
- My handles are ugly,
but they're comfortable.

530
00:20:31,472 --> 00:20:33,472
<i>And whatever they are
at the end of 15,</i>

531
00:20:33,590 --> 00:20:35,808
I'm gonna stop
and put a edge on these knives.

532
00:20:38,738 --> 00:20:43,241
- I've got a functional knife
together at this point.

533
00:20:43,401 --> 00:20:44,742
<i>I've taken the handle</i>

534
00:20:44,819 --> 00:20:46,699
<i>To where I can
at least hold on to them.</i>

535
00:20:46,729 --> 00:20:49,247
They're still blocky,
but I've got to sharpen

536
00:20:49,365 --> 00:20:51,474
So I can at least do well
in the tests.

537
00:20:55,538 --> 00:20:57,496
<i>- I need to get
both these handles</i>

538
00:20:57,573 --> 00:20:59,832
To the same shape
in ten minutes.

539
00:20:59,908 --> 00:21:02,075
<i>That's making me panic a bit.</i>

540
00:21:02,153 --> 00:21:03,948
- There's a dust storm
coming from cody.

541
00:21:06,915 --> 00:21:09,100
<i>- There's micarta dust
everywhere.</i>

542
00:21:09,218 --> 00:21:11,602
I don't even pay attention
to what I'm doing.

543
00:21:11,771 --> 00:21:12,853
Ow.

544
00:21:14,798 --> 00:21:16,757
I nick my finger on this belt.

545
00:21:16,834 --> 00:21:17,924
Damn it.

546
00:21:17,944 --> 00:21:20,002
- You have five minutes left!

547
00:21:20,004 --> 00:21:22,021
Oh, that's not good.

548
00:21:22,097 --> 00:21:24,448
The medic has to patch me up.
I'm bleeding everywhere.

549
00:21:24,567 --> 00:21:26,367
- Injury with the medic
on the floor

550
00:21:26,477 --> 00:21:28,155
Is the last thing
cody needs right now.

551
00:21:28,179 --> 00:21:29,348
<i>- The medic patching my hand.</i>

552
00:21:29,372 --> 00:21:30,937
I still have
another handle to shape,

553
00:21:30,957 --> 00:21:32,698
Plus get these blades sharpened.

554
00:21:32,816 --> 00:21:33,936
<i>And then all of a sudden...</i>

555
00:21:35,611 --> 00:21:37,110
My pin just fell out.

556
00:21:37,188 --> 00:21:38,945
- Uh-oh.
Cody grabbed more pin stock.

557
00:21:38,965 --> 00:21:40,464
- Oh, my god.

558
00:21:40,541 --> 00:21:43,192
- He's got an over-drilled hole
with a pin that fell out

559
00:21:43,194 --> 00:21:45,194
And epoxy
that's not sticking anymore.

560
00:21:45,196 --> 00:21:47,530
<i>- I throw a new pin in there
and I hope my pin doesn't</i>

561
00:21:47,532 --> 00:21:48,692
Fall out through the testing.

562
00:21:50,435 --> 00:21:55,462
- Five, four, three, two, one!

563
00:21:55,540 --> 00:21:57,001
Bladesmiths,
turn off your machines.

564
00:21:57,025 --> 00:21:58,390
Put down your tools.

565
00:21:58,509 --> 00:21:59,542
The second round
of this competition

566
00:21:59,544 --> 00:22:00,801
Is officially over.

567
00:22:00,878 --> 00:22:02,302
- Whoo, man!

568
00:22:04,048 --> 00:22:05,656
<i>- This was a difficult round.</i>

569
00:22:05,733 --> 00:22:08,159
I hope they test my knife
with that pin in there.

570
00:22:08,277 --> 00:22:09,568
<i>I don't know if it stayed.</i>

571
00:22:09,645 --> 00:22:11,181
<i>I don't know
if it's still in there.</i>

572
00:22:13,224 --> 00:22:15,202
- All right, gentlemen,
welcome to our strength test,

573
00:22:15,226 --> 00:22:18,410
The oil drum stab and chop.

574
00:22:18,487 --> 00:22:20,399
Now, to test the overall
construction of your blade

575
00:22:20,423 --> 00:22:21,708
And the strength
of those blades,

576
00:22:21,732 --> 00:22:24,233
I'll be stabbing
into these oil drums.

577
00:22:24,235 --> 00:22:26,179
Tim, you're up first.
Are you ready for this?

578
00:22:26,203 --> 00:22:27,327
- Yes, sir, have at it.

579
00:22:29,706 --> 00:22:31,574
<i>I know the handles are gonna
be a little rough on them,</i>

580
00:22:31,576 --> 00:22:33,684
<i>So I'm hoping
that it doesn't hurt them</i>

581
00:22:33,761 --> 00:22:35,168
Or anything of that nature.

582
00:22:35,246 --> 00:22:36,687
<i>But I'm a little anxious.</i>

583
00:22:58,936 --> 00:22:59,971
- So, tim, they're in one piece.

584
00:22:59,995 --> 00:23:01,194
Yay!

585
00:23:01,272 --> 00:23:03,029
One of your blades has lost

586
00:23:03,049 --> 00:23:05,549
Most of its sharpness
near the tip.

587
00:23:05,626 --> 00:23:09,628
And then this blade also took
quite a bit of rolling.

588
00:23:09,705 --> 00:23:11,538
This blade, not as much.

589
00:23:11,616 --> 00:23:14,450
There's two more rolls
up on the edge of the blade.

590
00:23:14,452 --> 00:23:16,710
But the biggest concern
I have with these blades

591
00:23:16,787 --> 00:23:17,895
Are the handles.

592
00:23:17,972 --> 00:23:20,046
They're very large
and very square,

593
00:23:20,124 --> 00:23:23,049
And then the edges of your guard

594
00:23:23,069 --> 00:23:23,901
Have some sharp spots on them.

595
00:23:24,019 --> 00:23:25,552
- Right.

596
00:23:25,630 --> 00:23:27,296
- But they're still functional,
so good job.

597
00:23:27,298 --> 00:23:28,814
- Yes, sir. Thank you so much.

598
00:23:28,932 --> 00:23:30,241
- All right, paul, you're up.

599
00:23:30,359 --> 00:23:31,378
You ready for this?
- Yeah.

600
00:23:31,402 --> 00:23:32,726
- Okay.

601
00:23:34,897 --> 00:23:37,473
<i>- I'm certainly nervous
that my knife's gonna break</i>

602
00:23:37,475 --> 00:23:39,235
<i>Or something crazy
is gonna happen.</i>

603
00:23:39,310 --> 00:23:41,943
And last thing you want to see
is your knife blow apart.

604
00:24:00,665 --> 00:24:03,332
- Good job.
- Thanks.

605
00:24:03,334 --> 00:24:05,776
- So, paul, these are
a good-looking set of blades.

606
00:24:05,853 --> 00:24:07,670
Nicely done.
- Thank you. Thank you.

607
00:24:07,672 --> 00:24:09,521
- As far as how they held up,

608
00:24:09,640 --> 00:24:11,932
You've got a little bit
of rolling

609
00:24:12,009 --> 00:24:15,619
In one spot on this blade,
but your tip is fine.

610
00:24:15,738 --> 00:24:17,955
And you've got,
again, some rolling

611
00:24:18,032 --> 00:24:21,033
And some compaction along
the edge here on this blade,

612
00:24:21,109 --> 00:24:24,110
But there's no rough spots
that I'm feeling in my hands.

613
00:24:24,130 --> 00:24:25,530
So great job.
- Thank you.

614
00:24:25,590 --> 00:24:26,689
- You bet.

615
00:24:26,691 --> 00:24:27,726
All right, cody, it's your turn.

616
00:24:27,750 --> 00:24:28,782
You ready?

617
00:24:28,859 --> 00:24:30,192
- You're gonna do it anyway.

618
00:24:30,194 --> 00:24:31,855
I am going to do it anyway.

619
00:24:34,623 --> 00:24:36,957
<i>- The thing that gives me
pause is my handles.</i>

620
00:24:37,034 --> 00:24:38,367
<i>I'm nervous
one might not be tested</i>

621
00:24:38,369 --> 00:24:40,035
<i>If that pin happened to fall out</i>

622
00:24:40,037 --> 00:24:41,704
Or there's too much
of a hotspot.

623
00:24:41,706 --> 00:24:43,055
<i>That would be devastating</i>

624
00:24:43,131 --> 00:24:44,373
<i>If I didn't even get the chance</i>

625
00:24:44,375 --> 00:24:45,816
<i>For my blades to be tested.</i>

626
00:25:11,594 --> 00:25:13,402
- All right, cody, so right off,

627
00:25:13,404 --> 00:25:16,755
Biggest issue I have
is that pin standing proud.

628
00:25:16,832 --> 00:25:19,575
It really creates a snag spot
where my...

629
00:25:19,602 --> 00:25:22,002
The pad of my finger lays.

630
00:25:22,021 --> 00:25:23,595
Your blades held up nicely.

631
00:25:23,714 --> 00:25:26,932
This one's got a couple
of rolled sections,

632
00:25:27,009 --> 00:25:29,101
But your tips are still there,
so good job.

633
00:25:29,237 --> 00:25:30,719
- Thank you.

634
00:25:33,591 --> 00:25:36,850
- All right, bladesmiths,
this is the sharpness test,

635
00:25:36,927 --> 00:25:38,944
The punching bag stab and slice.

636
00:25:40,781 --> 00:25:42,333
Tim, you're up first.
You ready for this?

637
00:25:42,357 --> 00:25:44,024
- Let's go.
- Let's do it.

638
00:26:03,454 --> 00:26:05,120
- All right, tim,
I can really see

639
00:26:05,122 --> 00:26:08,048
This part right here
took a lot of dulling,

640
00:26:08,125 --> 00:26:10,459
But you have the front part
here that is very sharp

641
00:26:10,461 --> 00:26:11,977
Because in cutting these bags,

642
00:26:12,054 --> 00:26:15,130
Both knives cut deeply
and stabbed as well.

643
00:26:15,132 --> 00:26:17,766
Overall, sir,
your blades, they will cut.

644
00:26:17,768 --> 00:26:19,559
- Thank you, sir.

645
00:26:19,637 --> 00:26:20,393
- All right, paul,
your turn, sir.

646
00:26:20,496 --> 00:26:21,656
You ready?
- Yes.

647
00:26:21,739 --> 00:26:23,080
- All right, let's do this.

648
00:26:43,327 --> 00:26:45,603
- All right, paul,
the areas where you suffered

649
00:26:45,679 --> 00:26:47,846
A little bit of rolling
were not an issue

650
00:26:47,964 --> 00:26:50,849
Because in stabbing
and cutting, it did its job.

651
00:26:50,967 --> 00:26:53,093
Overall, sir,
your blades, they will cut.

652
00:26:53,170 --> 00:26:54,612
- Thank you.

653
00:26:54,730 --> 00:26:55,757
- All right, cody,
it's your turn, sir.

654
00:26:55,781 --> 00:26:56,672
Are you ready?
- Yep.

655
00:26:56,699 --> 00:26:58,023
- Let's do this.

656
00:27:13,824 --> 00:27:15,115
- Good job, cody.

657
00:27:17,862 --> 00:27:20,028
- All right, cody,
your edges are very sharp.

658
00:27:20,030 --> 00:27:21,530
Barely took any rolling,

659
00:27:21,532 --> 00:27:23,699
And overall, sir, they will cut.

660
00:27:23,768 --> 00:27:25,142
- Thank you.

661
00:27:28,055 --> 00:27:30,274
- Well, bladesmiths, I want
to commend all three of you.

662
00:27:30,298 --> 00:27:31,965
We gave you
a very difficult challenge,

663
00:27:31,984 --> 00:27:34,300
And all of your blades
stood up to our test.

664
00:27:34,320 --> 00:27:36,189
But, unfortunately,
one of you is not gonna be

665
00:27:36,213 --> 00:27:38,547
Joining us in the final round
of this competition.

666
00:27:38,549 --> 00:27:40,549
The bladesmith
leaving the forge is...

667
00:27:44,279 --> 00:27:45,904
Tim.

668
00:27:45,981 --> 00:27:47,768
Unfortunately, your blades
just didn't make the cut,

669
00:27:47,792 --> 00:27:49,333
And dave's gonna tell you why.

670
00:27:49,410 --> 00:27:50,887
- Tim, I think
you did a great job

671
00:27:50,911 --> 00:27:52,336
Forging those blades out.

672
00:27:52,413 --> 00:27:53,774
This came down
the amount of damage

673
00:27:53,798 --> 00:27:55,506
That one of those blades took,

674
00:27:55,624 --> 00:27:58,734
And those really blocky handles
were just uncomfortable to use.

675
00:27:58,803 --> 00:28:00,235
- Yeah, I understand.

676
00:28:00,237 --> 00:28:02,065
- Tim, all four of us
want to say thank you

677
00:28:02,089 --> 00:28:03,775
For coming here,
working so hard in this forge,

678
00:28:03,799 --> 00:28:05,908
But unfortunately, your time
in this competition has ended.

679
00:28:05,910 --> 00:28:07,145
I'm gonna have to ask you
to please step off

680
00:28:07,169 --> 00:28:08,334
The forge floor.

681
00:28:08,412 --> 00:28:09,411
- Thank you, sir.
- Thank you, tim.

682
00:28:09,413 --> 00:28:11,013
- Good luck, guys.
Tear 'em up.

683
00:28:11,081 --> 00:28:12,581
- Be well, tim.

684
00:28:12,583 --> 00:28:14,082
<i>- A little bummed out,
but, you know,</i>

685
00:28:14,084 --> 00:28:17,920
Winning is a momentary time
and learning is forever.

686
00:28:17,922 --> 00:28:20,282
Smithing is always in my blood.
I'll smith until I die.

687
00:28:22,092 --> 00:28:23,420
<i>I'll probably die
with a hammer in my hand</i>

688
00:28:23,444 --> 00:28:25,944
And a guinness.

689
00:28:26,062 --> 00:28:27,874
- Well, paul, cody,
gentlemen, congratulation.

690
00:28:27,898 --> 00:28:29,689
The two of you
are moving forward

691
00:28:29,767 --> 00:28:32,025
In the third and final round
of this competition.

692
00:28:32,044 --> 00:28:33,602
We are sending you back
to your home forges

693
00:28:33,604 --> 00:28:36,714
For four days to build
an iconic weapon from history.

694
00:28:36,832 --> 00:28:39,107
Gentlemen,
you're gonna be building this.

695
00:28:42,388 --> 00:28:45,723
- Oh.
- The cinquedea sword.

696
00:28:45,841 --> 00:28:47,685
<i>- The cinquedea sword
was used by noblemen</i>

697
00:28:47,709 --> 00:28:50,728
<i>In northern Italy during
the 15th and 16th century.</i>

698
00:28:50,846 --> 00:28:53,138
<i>While the name cinquedea
means "five fingers,"</i>

699
00:28:53,215 --> 00:28:55,640
<i>Referring to the width
of the blade at its hilt,</i>

700
00:28:55,717 --> 00:28:57,976
<i>The weapon's most
distinguishing feature</i>

701
00:28:58,094 --> 00:28:59,697
<i>Is its double-edged
triangular blade</i>

702
00:28:59,721 --> 00:29:01,739
<i>With multiple fullers
on both sides,</i>

703
00:29:01,815 --> 00:29:04,390
<i>Which makes the massive sword
lightweight enough</i>

704
00:29:04,468 --> 00:29:06,744
<i>To deliver deadly thrusts
and slashes.</i>

705
00:29:06,862 --> 00:29:08,394
<i>A smaller version
of this sword was featured</i>

706
00:29:08,414 --> 00:29:09,747
<i>On previous "forged in fire"</i>

707
00:29:09,907 --> 00:29:11,656
<i>And beat the judges competitions</i>

708
00:29:11,733 --> 00:29:13,511
<i>Where these fullers have
also presented a challenge</i>

709
00:29:13,535 --> 00:29:15,235
<i>To many of our smiths,</i>

710
00:29:15,254 --> 00:29:18,313
<i>Including our very own
unbeaten judgment, ben abbott.</i>

711
00:29:18,315 --> 00:29:19,960
- When you're building
your swords,

712
00:29:19,984 --> 00:29:21,908
Make sure they fall within
the following parameters.

713
00:29:21,927 --> 00:29:23,502
Your blades, measured from tip

714
00:29:23,578 --> 00:29:25,264
To where the cutting edge ends
in a straight line

715
00:29:25,288 --> 00:29:28,323
Needs to measure
between 26 and 28 inches.

716
00:29:28,325 --> 00:29:30,158
That blade needs to be
double-edged

717
00:29:30,160 --> 00:29:33,512
And both sides of your blade
need to have six fullers.

718
00:29:33,588 --> 00:29:36,181
You need to have
a curved, upswept guard

719
00:29:36,299 --> 00:29:38,683
And a crescent pommel.

720
00:29:38,760 --> 00:29:41,445
<i>- I haven't made anything
quite this long before.</i>

721
00:29:41,522 --> 00:29:42,762
Those six fullers are gonna be

722
00:29:42,840 --> 00:29:45,190
Pretty hard to put
into that sword.

723
00:29:45,267 --> 00:29:49,027
Well, 12.6 on each side.

724
00:29:49,104 --> 00:29:51,455
- So good luck, gentlemen.
We will see you in four day.

725
00:29:56,186 --> 00:29:58,444
<i>- We're in homer glen, illinois,</i>

726
00:29:58,522 --> 00:30:01,206
And I'm going to build
a cinquedea sword.

727
00:30:01,324 --> 00:30:03,783
<i>I'm gonna do a layered damascus.</i>

728
00:30:03,861 --> 00:30:06,470
Cody makes a lot
of really nice damascus stuff.

729
00:30:06,547 --> 00:30:08,806
<i>That's why I've decided
to do some damascus</i>

730
00:30:08,966 --> 00:30:11,199
So that my piece
stacks up to his.

731
00:30:13,929 --> 00:30:15,687
<i>So I have
the front of the billet</i>

732
00:30:15,806 --> 00:30:17,889
<i>All drawn down nicely,</i>

733
00:30:17,966 --> 00:30:20,466
<i>And I'm moving
the back end, and...</i>

734
00:30:20,486 --> 00:30:22,210
Oh, !

735
00:30:22,212 --> 00:30:24,379
<i>Big crack develops.</i>

736
00:30:24,381 --> 00:30:27,065
There's no way to save time now
to make a new one.

737
00:30:27,183 --> 00:30:29,023
<i>I'm just gonna skip
the damascus blade.</i>

738
00:30:29,111 --> 00:30:30,663
<i>That's gonna eat up
too much time</i>

739
00:30:30,687 --> 00:30:32,554
<i>Trying to do that again.</i>

740
00:30:32,556 --> 00:30:35,724
<i>I'm not real happy,
but I'm gonna go mono-steel.</i>

741
00:30:35,726 --> 00:30:38,001
I have a nice piece of 80 crb2.

742
00:30:38,120 --> 00:30:39,336
<i>It could be worse.</i>

743
00:30:39,413 --> 00:30:41,880
I could have no sword,
so it's not that bad.

744
00:30:47,203 --> 00:30:49,399
<i>- The game plan for today
is to go with two billets.</i>

745
00:30:49,423 --> 00:30:51,406
One's gonna be twisted damascus
for the guard and pommel,

746
00:30:51,408 --> 00:30:53,111
<i>And then I'm gonna go
with a big billet</i>

747
00:30:53,135 --> 00:30:54,518
<i>To start off the sword build.</i>

748
00:30:54,636 --> 00:30:56,078
<i>I love doing damascus</i>

749
00:30:56,080 --> 00:30:58,096
<i>And I want to push the envelope.</i>

750
00:30:58,214 --> 00:31:00,840
Twist damascus is pretty tough
'cause you got to make sure

751
00:31:00,918 --> 00:31:02,579
<i>You're working it
when it's really, really hot,</i>

752
00:31:02,603 --> 00:31:04,344
<i>And you could twist it off.</i>

753
00:31:04,363 --> 00:31:07,513
I get my damascus twisted
and move on to the blade steel,

754
00:31:07,533 --> 00:31:10,033
<i>25 layers of 15n20 and 1084.</i>

755
00:31:10,110 --> 00:31:12,110
Looking good!

756
00:31:12,187 --> 00:31:13,907
Didn't quite achieve
where I wanted to be,

757
00:31:13,931 --> 00:31:16,022
<i>But tried my best, and we'll
finish her up in the morning.</i>

758
00:31:16,041 --> 00:31:17,449
That's it for day one.

759
00:31:18,860 --> 00:31:22,195
<i>- Yesterday was a bit rough.
I abandoned the damascus.</i>

760
00:31:22,272 --> 00:31:24,789
So if I'm gonna turn in
a mono-steel blade,

761
00:31:24,866 --> 00:31:26,586
<i>Then my mono-steel
better be shiny</i>

762
00:31:26,627 --> 00:31:29,202
And fit and finish
better be perfect.

763
00:31:29,279 --> 00:31:32,389
Once the forging was done,
I heat-treat it.

764
00:31:34,176 --> 00:31:36,785
<i>The sword comes out straight.</i>

765
00:31:36,787 --> 00:31:38,970
<i>Hard as glass right now.</i>

766
00:31:39,089 --> 00:31:43,383
With 12 fullers,
that's quite a process.

767
00:31:43,402 --> 00:31:46,478
End of day two, I still have
to fit a guard and a pomml

768
00:31:46,554 --> 00:31:50,465
And all this kind of stuff,
but I'm in good shape.

769
00:31:50,467 --> 00:31:52,300
<i>- It's the beginning of day two.</i>

770
00:31:52,302 --> 00:31:53,913
Today, we're gonna finish
forging out the sword

771
00:31:53,937 --> 00:31:57,139
And get the fullers ground in.

772
00:31:57,141 --> 00:32:00,417
I don't do a lot of fullers,
especially this many fullers.

773
00:32:00,494 --> 00:32:02,814
<i>You got to make sure you're
holding the blade straight</i>

774
00:32:02,871 --> 00:32:04,813
<i>And making sure
you're not going too deep.</i>

775
00:32:04,815 --> 00:32:08,408
If I go through my blade,
that's not good.

776
00:32:10,337 --> 00:32:12,320
<i>So I got my fullers in.
Everything's looking great.</i>

777
00:32:12,322 --> 00:32:15,098
And now it's time
to get ready for the quench.

778
00:32:15,217 --> 00:32:17,434
<i>My oven's only 27 inches deep,</i>

779
00:32:17,511 --> 00:32:19,844
<i>And this blade is 32 inches long</i>

780
00:32:19,921 --> 00:32:21,830
<i>So I'm gonna have
to leave the door open</i>

781
00:32:21,832 --> 00:32:24,683
And wrap it
with fiberglass heat blanket

782
00:32:24,759 --> 00:32:26,759
To keep the heat in.

783
00:32:26,837 --> 00:32:28,094
<i>When I put the blade in,</i>

784
00:32:28,113 --> 00:32:29,947
The temperature's not
going back up

785
00:32:30,023 --> 00:32:31,417
As I close the door and wrap it.

786
00:32:33,902 --> 00:32:35,360
<i>I could get a bad quench,</i>

787
00:32:35,478 --> 00:32:37,829
<i>And it's gonna end up
costing me.</i>

788
00:32:37,948 --> 00:32:39,247
That's not good.

789
00:32:43,278 --> 00:32:45,629
So I put another piece
of blanket over the top corner

790
00:32:45,706 --> 00:32:47,333
Of the door that I saw that
there was heat escaping out of,

791
00:32:47,357 --> 00:32:49,708
<i>Get it nice and tight
so there's no leaks.</i>

792
00:32:49,843 --> 00:32:51,617
Seems like it's working.

793
00:32:51,679 --> 00:32:52,711
Here we go.

794
00:32:54,622 --> 00:32:56,956
<i>Don't hear any tings,
pings, or cracks.</i>

795
00:32:56,976 --> 00:32:59,534
Looks like we had a good quench.

796
00:32:59,536 --> 00:33:00,702
Hopefully I can
just finish this up

797
00:33:00,704 --> 00:33:02,628
And make a good sword.

798
00:33:02,690 --> 00:33:03,963
Perfectly straight.

799
00:33:05,542 --> 00:33:06,911
<i>- I'm feeling really good
this morning.</i>

800
00:33:06,935 --> 00:33:09,635
<i>The blade's essentially done,</i>

801
00:33:09,713 --> 00:33:12,472
<i>So, you know, plan for today
is to work on the handle.</i>

802
00:33:12,549 --> 00:33:15,233
<i>I'm planning
on incorporating materials</i>

803
00:33:15,351 --> 00:33:16,718
<i>From my round one knives,</i>

804
00:33:16,720 --> 00:33:18,644
<i>So I'm gonna use two canisters,</i>

805
00:33:18,664 --> 00:33:20,739
<i>One ball bearing
and one fishhook,</i>

806
00:33:20,857 --> 00:33:21,981
For the pommel and guard.

807
00:33:28,899 --> 00:33:31,416
<i>Cinquedea means
five-finger sword.</i>

808
00:33:31,493 --> 00:33:34,236
The sword should be as wide
as your five fingers.

809
00:33:34,238 --> 00:33:35,737
<i>So that's what I did</i>

810
00:33:35,739 --> 00:33:37,739
<i>To try to maintain
that historical accuracy.</i>

811
00:33:37,741 --> 00:33:39,621
Think that's gonna look good
on tv.

812
00:33:40,927 --> 00:33:42,502
<i>- Beginning of day four,</i>

813
00:33:42,521 --> 00:33:46,005
I've just got to finish up
the final touches of the sword.

814
00:33:46,025 --> 00:33:47,766
Oh, yeah, nice deep etch.

815
00:33:49,552 --> 00:33:52,512
<i>I got my handle
all profiled and contoured,</i>

816
00:33:52,589 --> 00:33:54,269
<i>And I think it's time
to sharpen the blade.</i>

817
00:33:55,558 --> 00:33:57,759
Paul's got ten more years
of experience than I do,

818
00:33:57,761 --> 00:33:59,928
<i>But I'm feeling pretty
confident what I have made.</i>

819
00:33:59,930 --> 00:34:01,299
<i>I know I've got
good strong steel</i>

820
00:34:01,323 --> 00:34:02,800
<i>And just got to see
what happens.</i>

821
00:34:11,407 --> 00:34:13,608
- Well, paul, cody, gentlemen,
welcome back to the forge.

822
00:34:13,610 --> 00:34:15,868
Now, leading up to today,
you guys just spent four days

823
00:34:15,946 --> 00:34:17,054
At your home forges

824
00:34:17,172 --> 00:34:19,114
Building your very best
cinquedea swords,

825
00:34:19,141 --> 00:34:20,782
And, guys,
they're both beautiful.

826
00:34:20,784 --> 00:34:23,060
They look strong, they look
sharp, they look deadly.

827
00:34:23,220 --> 00:34:25,120
But before we get into testing,

828
00:34:25,122 --> 00:34:26,254
I want to know
about these blades.

829
00:34:26,256 --> 00:34:27,789
Paul, how'd it go for you?

830
00:34:27,791 --> 00:34:28,791
- It went okay.

831
00:34:30,477 --> 00:34:33,553
<i>That blade's built
out of 80 crb2, full tang.</i>

832
00:34:33,630 --> 00:34:36,147
<i>I did the handle the same
as my round one knives</i>

833
00:34:36,266 --> 00:34:39,150
<i>With ball bearing damascus
and fishhooks.</i>

834
00:34:39,269 --> 00:34:41,139
- Well, it looks great.
Cody, how about you?

835
00:34:41,163 --> 00:34:42,563
- Everything went
according to plan.

836
00:34:44,032 --> 00:34:47,900
<i>My blade is 155 layers
of 15n20 and 1084,</i>

837
00:34:47,978 --> 00:34:50,420
<i>Restacked with 80 crb2</i>

838
00:34:50,497 --> 00:34:52,071
<i>And twisted damascus
for the guard and pommel,</i>

839
00:34:52,091 --> 00:34:54,257
<i>Ancient bog oak for the handle.</i>

840
00:34:54,334 --> 00:34:56,259
- Guys, both your blades
look amazing,

841
00:34:56,378 --> 00:34:58,320
But the best way we know
how to find out

842
00:34:58,322 --> 00:34:59,890
Which one of you
is gonna leave here today

843
00:34:59,914 --> 00:35:01,323
With the title
of "forged in fire" champion

844
00:35:01,325 --> 00:35:02,786
Is by putting them
through a few tests.

845
00:35:02,810 --> 00:35:04,601
Up first, the keal.

846
00:35:07,664 --> 00:35:11,166
- Bladesmiths,
welcome to the keal test.

847
00:35:11,168 --> 00:35:12,444
To find out how lethal
your weapons are,

848
00:35:12,468 --> 00:35:14,038
I'm gonna take
your cinquedea sword

849
00:35:14,062 --> 00:35:17,188
And deliver some lethal slashes
on this goat carcass.

850
00:35:17,265 --> 00:35:18,484
Paul, you're up first.
You ready for this?

851
00:35:18,508 --> 00:35:19,950
- Oh, yeah.
- Let's do this.

852
00:35:20,026 --> 00:35:22,119
- The hide on that goat
is really thick.

853
00:35:22,237 --> 00:35:24,454
<i>All that hair and hide
makes it really hard</i>

854
00:35:24,531 --> 00:35:28,350
For a sword to penetrate,
but we'll see.

855
00:35:47,387 --> 00:35:50,705
All right, paul, let's talk
about your cinquedea.

856
00:35:50,707 --> 00:35:53,725
When I grab onto it,
I've got a good grip,

857
00:35:53,801 --> 00:35:55,210
Which is very important

858
00:35:55,212 --> 00:35:58,380
Because it's
a very forward-heavy blade.

859
00:35:58,382 --> 00:36:00,418
When I'm swinging this,
I'm really focused

860
00:36:00,442 --> 00:36:03,067
More on stopping to control it

861
00:36:03,144 --> 00:36:05,069
As opposed
to just letting it go.

862
00:36:05,146 --> 00:36:08,740
But the edge is very sharp
and those are very deep cut.

863
00:36:08,816 --> 00:36:10,725
This is a very lethal weapon,

864
00:36:10,727 --> 00:36:13,503
And, more importantly,
it will keal.

865
00:36:13,580 --> 00:36:15,005
- Thank you.

866
00:36:15,081 --> 00:36:16,231
- Your turn, cody. Ready?

867
00:36:16,300 --> 00:36:18,583
- Swing away.
- Let's do this.

868
00:36:18,701 --> 00:36:20,062
- Going into testing,
I'm eager to see

869
00:36:20,086 --> 00:36:21,419
What my sword's gonna do.

870
00:36:21,537 --> 00:36:23,307
<i>I don't know how my edge
is gonna hold up.</i>

871
00:36:23,331 --> 00:36:25,318
<i>I mean, I know it's sharp,
I tested it at home,</i>

872
00:36:25,342 --> 00:36:27,517
But I guess
anything can happen here.

873
00:36:51,693 --> 00:36:55,212
- All right, cody, first up,
your handle construction.

874
00:36:55,288 --> 00:36:58,273
When I grab onto that,
ooh, it's perfect.

875
00:36:58,300 --> 00:37:00,608
Your edges are very sharp,

876
00:37:00,610 --> 00:37:03,111
As we ran out of goat carcass
right here.

877
00:37:03,113 --> 00:37:06,706
It's also manageable
as a one-handed sword.

878
00:37:06,725 --> 00:37:09,893
Overall, sir,
your cinquedea, it will keal.

879
00:37:10,011 --> 00:37:11,469
- Thank you.

880
00:37:14,566 --> 00:37:16,791
- All right, bladesmiths,
welcome to our strength test.

881
00:37:16,793 --> 00:37:19,719
Our clay pot smash.

882
00:37:19,738 --> 00:37:22,072
I'm gonna take
each of your swords

883
00:37:22,190 --> 00:37:23,648
And separate these clay pots

884
00:37:23,725 --> 00:37:25,650
Into a bunch
of little teeny tiny pieces.

885
00:37:25,727 --> 00:37:27,613
Now, paul, you're up first.
You ready to go?

886
00:37:27,637 --> 00:37:29,487
- Yep, I'm ready.
- All right, let's do it.

887
00:37:47,507 --> 00:37:49,749
All right, paul, nice job.

888
00:37:49,768 --> 00:37:52,994
It is very well done.
Still a little heavy, though.

889
00:37:52,996 --> 00:37:56,180
Your edge, no damage at all.

890
00:37:56,257 --> 00:37:59,667
Everything was tight
and strong when I started,

891
00:37:59,669 --> 00:38:01,594
And it's still that way
when I'm done.

892
00:38:01,671 --> 00:38:03,354
Good job, man.
- Thank you.

893
00:38:03,473 --> 00:38:05,006
- Hey, cody, ready to go, man?

894
00:38:05,008 --> 00:38:07,784
- Let it rip.
- Let's do it.

895
00:38:28,015 --> 00:38:29,955
- Cody, nice job.

896
00:38:30,033 --> 00:38:31,215
The steel came out great,

897
00:38:31,292 --> 00:38:33,362
And there's nothing wrong
with this edge at all.

898
00:38:33,386 --> 00:38:36,204
It's tight, it's sharp,
it's beautiful.

899
00:38:36,206 --> 00:38:38,506
Good job.
- Thank you.

900
00:38:41,378 --> 00:38:44,804
- All right, bladesmiths,
this is the sharpness test,

901
00:38:44,823 --> 00:38:48,399
The sandman stab and slice.

902
00:38:48,518 --> 00:38:49,545
Paul, you're up first.
You ready for this?

903
00:38:49,569 --> 00:38:51,219
- Yep.
- All right, let's do this.

904
00:39:13,668 --> 00:39:15,501
- All right, paul,
let's talk about your

905
00:39:15,579 --> 00:39:18,096
Massive beast
of a cinquedea sword.

906
00:39:18,172 --> 00:39:21,265
It is razor sharp.

907
00:39:21,342 --> 00:39:23,601
Every cut delivered
cuts very deep.

908
00:39:23,719 --> 00:39:25,253
The thrust, even coming out,

909
00:39:25,255 --> 00:39:27,680
You can see that long line
that it cut.

910
00:39:27,757 --> 00:39:30,367
Overall, sir, it will cut.

911
00:39:30,527 --> 00:39:31,851
- Thanks.

912
00:39:31,870 --> 00:39:33,089
- All right, cody,
your turn, sir.

913
00:39:33,113 --> 00:39:34,019
You ready for this?
- Yep.

914
00:39:34,081 --> 00:39:35,372
- Let's do it.

915
00:39:53,308 --> 00:39:55,892
Oops.

916
00:40:03,126 --> 00:40:05,718
All right, cody, let's talk
about your weapon here.

917
00:40:05,795 --> 00:40:08,721
The grinds you have here
are a lot thinner,

918
00:40:08,798 --> 00:40:10,798
So it's razor sharp.

919
00:40:10,800 --> 00:40:14,485
It cuts so deep, it pretty much
dropped this sandman.

920
00:40:14,562 --> 00:40:18,081
Overall, sir,
your weapon, it will cut.

921
00:40:18,199 --> 00:40:20,065
- Thank you.

922
00:40:22,312 --> 00:40:24,590
- Well, paul, cody, gentlemen,
we've got two beautiful blades

923
00:40:24,614 --> 00:40:26,214
That stood up
to our brutal testing

924
00:40:26,240 --> 00:40:27,982
And came out without a scratch.

925
00:40:27,984 --> 00:40:30,318
But only one of you can
leave here today with the title

926
00:40:30,320 --> 00:40:33,579
Of "forged in fire" champion
and get a check for $10,000.

927
00:40:33,657 --> 00:40:35,823
Today's "forged in fire"
champion is...

928
00:40:39,462 --> 00:40:41,629
Cody. Congratulations.

929
00:40:41,631 --> 00:40:43,940
Now, paul,
this was a close race,

930
00:40:44,017 --> 00:40:45,703
But unfortunately, your
cinquedea did not make the cut,

931
00:40:45,727 --> 00:40:47,351
And doug's gonna tell you why.

932
00:40:47,428 --> 00:40:49,837
- Paul, you should be very
proud of your craftsmanship.

933
00:40:49,839 --> 00:40:51,948
From tip to pommel,
that's a beautiful blade.

934
00:40:52,025 --> 00:40:54,244
But at the end of the day,
it's much heavier than tht

935
00:40:54,268 --> 00:40:56,602
Of your opponent's, and it
requires more effort to wield,

936
00:40:56,680 --> 00:40:57,845
And that's the reason
we're letting you go.

937
00:40:57,847 --> 00:40:59,289
- Okay.

938
00:40:59,407 --> 00:41:00,993
- Now, paul, we want to say
thank you so much

939
00:41:01,017 --> 00:41:02,942
For coming and trying
so hard in this competition,

940
00:41:02,961 --> 00:41:04,352
But at this point,
unfortunately,

941
00:41:04,354 --> 00:41:05,431
I'm gonna have to ask you
to please step off

942
00:41:05,455 --> 00:41:06,946
The forge floor.

943
00:41:06,965 --> 00:41:08,501
- Thanks for having me.
I had a lot of fun.

944
00:41:08,525 --> 00:41:09,944
Great job, cody.
- Great job, paul.

945
00:41:09,968 --> 00:41:11,301
- Thanks.

946
00:41:11,419 --> 00:41:12,860
<i>It was the right decision.</i>

947
00:41:12,862 --> 00:41:15,454
I built a good blade
and cody built a better blade.

948
00:41:15,532 --> 00:41:17,140
<i>I feel like
I went down swingin'.</i>

949
00:41:17,217 --> 00:41:18,475
<i>I'm proud of my sword,</i>

950
00:41:18,635 --> 00:41:20,977
And the experience
was fantastic.

951
00:41:21,054 --> 00:41:24,388
<i>I'd start another round
tomorrow if they let me.</i>

952
00:41:24,465 --> 00:41:26,224
- Cody, man, congratulations.

953
00:41:26,300 --> 00:41:27,620
You are the newest
"forged in fire" champion

954
00:41:27,644 --> 00:41:29,602
And you just won
a check for $10,000.

955
00:41:29,654 --> 00:41:30,878
Congratulations.

956
00:41:30,880 --> 00:41:32,213
- Thank you.

957
00:41:32,215 --> 00:41:34,139
Winning this is just
icing on the cake.

958
00:41:34,159 --> 00:41:36,234
<i>Smithing came way down the road,</i>

959
00:41:36,310 --> 00:41:38,052
<i>But it found me,
and it's my passion,</i>

960
00:41:38,054 --> 00:41:39,829
<i>And I'm gonna keep doing it.</i>

961
00:41:39,906 --> 00:41:41,425
<i>Thanks, tyler... I'll never be
able to thank you enough,</i>

962
00:41:41,449 --> 00:41:43,741
And appreciate you.

963
00:41:43,859 --> 00:41:50,215
>>>>oakislandtk<<<<<
www.opensubtitles.org


