1
00:00:00,000 --> 00:00:06,360
tutorial 86 in this tutorial we're going to take the next constraint it's

2
00:00:06,360 --> 00:00:15,920
 angle constraint and from its name we can make an angle between two edges of

3
00:00:15,920 --> 00:00:23,720
 surfaces so let's try to apply on this product and as we remember we made an

4
00:00:23,720 --> 00:00:28,760
 opposite constraint in the previous tutorial and if you come to apply the

5
00:00:28,760 --> 00:00:34,440
 angle constraint it's not going to work and it will require you to create one

6
00:00:34,440 --> 00:00:40,320
 constraint so let's first try the angle constraint without deleting the

7
00:00:40,320 --> 00:00:47,240
opposite constraint between the two surfaces this just the surface and the

8
00:00:47,240 --> 00:00:58,520
 surface and make a 45 degree angle okay and click update so here the

9
00:00:58,520 --> 00:01:07,800
 dialog asks you to delete one constraint which is now let's close this and

10
00:01:07,800 --> 00:01:14,920
 delete this angle constraint and the opposite constraint and again let's apply

11
00:01:14,920 --> 00:01:25,480
 the angle constraint this surface and this surface let's make it 45 okay

12
00:01:25,480 --> 00:01:28,480
 update

13
00:01:35,400 --> 00:01:43,440
 you have the constraint and also need to be deleted because as we remember both

14
00:01:43,440 --> 00:01:52,160
cylinders are having straight axis so we deleted the cylindrical constraint

15
00:01:52,160 --> 00:02:07,479
 this update now we have 45 degree angle between these two surfaces and if you go

16
00:02:07,479 --> 00:02:18,519
 to the move let's move this upward okay you notice there is no an update

17
00:02:18,520 --> 00:02:23,520
 option because there is no any constraint to be updated