All language subtitles for Exercises_02

We will come back in this tutorial we will create one drawing based on what we learn in previous tutorial.

So we will be creating this object.

So let's start with clicking on start mechanical design sketch here.

Then select the plane.

Now in this object suppose I want this circle at distance of 60.

So at first I will create one axis from this point to this point.

And I will press tab to give the distance of 60.

Then click on the center and click for the point direction.

So this 60 length line is created.

Then next is this 82 and 56.

So just pan it from here it will be 82.

And from here it will be 56.

So using constraint also you can give the dimension.

So this is 82 and this is 56.

So after that I will create this circle, the 28th circle, give the center point,

give the location, constraint, give the diameter of 28.

So same way here circle.

You can also press the tab button.

So there is radius.

So I will give 14.

So just, so these two circles are ready and 30s again this circle is again 28.

So circle endpoint again tab 14.

Tagged thereo.

So these three circles are created.

Then outside three circles are of 27 radius.

So again circle.

I will give the circle directly.

Or you can also double click on the circle to repeat the command.

And then constraint.

Give it radius 27.

27.

27.

Then next circle is this 30 radius touching this or tangent to this two circle.

So at first I will create a circle, give the radius.

Okay, constraint, give the radius of 30.

Then press control and select to object these two circles.

Click on constraint defined in dialogue box and make it tangents.

Again select this two circle using control.

Then again tangents.

So this has been created.

Then next is 83.

Again this 83 is touching this circle and this circle.

So again we will create one bigger circle.

Take care that it will not automatically take some constraint.

Otherwise it will not create it properly.

Then give the constraint 83.

Enter then press the first button and drag it and place it.

So we want it like this.

Then select this circle and this circle.

Press control for multiple selection.

Click on constraint defined in dialogue box tangency.

Again this circle control this circle.

Constantly defined in dialogue box tangency.

Then next is this circle and this circle.

Again we will create those circles.

Here we need to give it tangency.

It automatically showing the tangency.

So we can take that.

Then give the parameter 10 radius.

Then control and hold this.

Select this two circle.

Constantly defined in dialogue box tangency.

Same way here also.

Zoom it and you can drag the arrow.

Again circle create it here.

Make it tangent.

Then again control.

Select both of the tangency.

Give the parameter 10.

In this way all the two zoom by mouse.

Just press the scroll right click and drag the mouse.

In this way you can zoom using mouse also.

Now the objects which are not needed will be.

We can cut it using tricktrain here.

Or just double click on it so that you don't have to click it again and again for the trim command.

Same way trim all the non-record objects.

Zoom it and trim it.

Same way internal circles are not needed.

So we can trim both also.

Then what is the remand is internal circle from this line it is at 2240.

So from here again we will create one axis.

Vertical axis and horizontal axis.

So this need to be 22 constraint.

And this need to be 40.

Then the circle is of 20 diameter circle.

That is 10 radius.

Zoom it.

So in this way this object is ready.

So thanks for watching.